diff --git a/README.md b/README.md
index a6545e5..ef7c7c8 100644
--- a/README.md
+++ b/README.md
@@ -13,8 +13,8 @@ randomly and silently crashing on me, defeating its purpose.
 * runs in the background and watches for the configured application
 * starts tools you need with the application when it’s up
 * (optional) kills the tools again when it’s down
-* when it’s up, watches configured devices for inputs and focuses the 
-  application if you move the X/Y axis or hit a button
+* when it’s up, watches configured devices for input and focuses the application 
+  if you move the X/Y axis or hit a button
 
 ## Requirements
 
@@ -26,42 +26,91 @@ source. Obviously needs AutoHotKey installed.
 ### Using the Executable ##
 
 If you don’t want to install AutoHotKey and/or want something that “just works”, 
-there is [a compiled .exe on the releases page](/releases).
+there is [a compiled .exe on the releases 
+page](https://github.com/alterNERDtive/ahk-joystick-focus/releases/latest).
 
 ## Settings ##
 
-FIXXME
+Before running the script for the first time, you need to create a `focus.ini` 
+file or rename the included `focus.example.ini` to that. It contains my personal 
+settings if you want to go off those as a base. Which is exactly what I’ll be 
+doing here to explain things.
 
+### Target Application ###
+
+```
 [target]
-; target program to set focus to
 name="EliteDangerous64.exe"
+```
 
+The name of the executable the script should be monitoring for. In case of 
+Elite: Dangerous, that is `EliteDangerous64.exe`.
+
+### Polling Rates ###
+
+```
 [polling]
-; (in ms)
-; the lower you set this, the more CPU it will use and the faster/snappier it will react to joystick input
 pollingrate=100
-; how often to check for target program running
-; this is way less time-critical since it will take a while to load anyway
 targetcheckrate=5000
+```
 
+`pollingrate` (in ms) here is the interval at which to check for input on the 
+configured devices. `targetcheckrate` (also in ms) is the rate at which the 
+script will check if the target application is running. This is less 
+time-critical as it will probably take a couple seconds to fully start anyway.
+
+The lower you set the polling rates, the more CPU it will cost to keep the 
+script running in the background but also the snappier it will react to inputs. 
+If you feel like 100 ms are too slow, set a delay that’s smaller.
+
+### Device Settings ###
+
+```
 [devices]
-; intensity of axis movement required to pop focus to the target (5 = 10% movement from center)
-threshold=5
-; set these to the correct devices for your sticks/HOTAS
-; MIGHT change on reboot, but has been consistent for me so far
 name1="2Joy"
 name2="4Joy"
-; if you have different curves on the sticks, adjust effective sensitivity here
-; (same order as devices)
 sensitivity1=10
 sensitivity2=1
+threshold=5
+```
 
+In this section of the config file you are defining the devices the script 
+should be monitoring.
+
+`name1` through `nameX` are the names in AHK terms, with `Joy` or `1Joy` being 
+the first in the list. You’ll probably have to go through them in sequence to 
+find out which physical device is which number. The ordering MIGHT change after 
+you reboot the system but has been consistent for me so far. It should 
+definitely change if you reboot with one of the devices unplugged.
+
+`sensitivity1` through `sensitivityX` is a multiplier used for the axis inputs 
+of the device with the same number as above. If you do not have set any curves 
+for your device(s), you should probably leave this at `1` for all of them. 
+Personally I have a very non-aggressive curve on my right stick, so that ones 
+multiplier is cranked all the way up to `10`.
+
+Last but not least, `threshold` will be the intensity of input needed on an axis 
+to trigger the script to focus your application. `5` means a 10% movement up or 
+down an axis since the entire range of movement is `0` to `100`, with `50` being 
+resting position. If your device is “wobbly” and needs a huge dead zone in order 
+not to produce ghost inputs, you might have to increase this.
+
+### Tools Settings ###
+
+```
 [tools]
-; tools to run
 path1="C:\Program Files (x86)\EDMarketConnector\EDMarketConnector.exe"
 path2="D:\Tools\SSChanger\SSChanger.exe"
-; whether to kill them when target program shuts down
 kill=True
+```
+
+Here you can set tools the script should run alongside your application.
+
+`path1` to `pathX` has to be set to the full paths of the tools.
+
+`kill` is a boolean (`True`/`False`) to tell the script whether to kill the 
+tools again after your target application has shut down. If you want them to 
+stay open, just set this to `False`.
 
 ## Need Help / Want to Contribute? ##
 
diff --git a/focus.example.ini b/focus.example.ini
index 448f71f..6019a3e 100755
--- a/focus.example.ini
+++ b/focus.example.ini
@@ -6,11 +6,11 @@ pollingrate=100
 targetcheckrate=5000
 
 [devices]
-threshold=5
 name1="2Joy"
 name2="4Joy"
 sensitivity1=10
 sensitivity2=1
+threshold=5
 
 [tools]
 path1="C:\Program Files (x86)\EDMarketConnector\EDMarketConnector.exe"