qmk_firmware/keyboards/handwired/trackpoint/config.h

68 lines
2 KiB
C
Raw Normal View History

#pragma once
2017-05-26 20:35:31 +02:00
#include "config_common.h"
2017-05-26 20:35:31 +02:00
#define VENDOR_ID 0x1234
#define PRODUCT_ID 0x5678
#define DEVICE_VER 0x0001
#define MANUFACTURER QMK
#define PRODUCT TRACKPOINT-DEMO
#define DESCRIPTION Simple demonstration for IBM Trackpoint integration
2017-05-26 20:35:31 +02:00
#define MATRIX_ROWS 1
#define MATRIX_COLS 3
2017-05-26 20:35:31 +02:00
#ifdef PS2_USE_USART
#define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD
#define PS2_CLOCK_BIT 5
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 2
2017-05-26 20:35:31 +02:00
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
/* set DDR of CLOCK as input to be slave */
#define PS2_USART_INIT() do { \
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
UCSR1C = ((1 << UMSEL10) | \
(3 << UPM10) | \
(0 << USBS1) | \
(3 << UCSZ10) | \
(0 << UCPOL1)); \
UCSR1A = 0; \
UBRR1H = 0; \
UBRR1L = 0; \
} while (0)
#define PS2_USART_RX_INT_ON() do { \
UCSR1B = ((1 << RXCIE1) | \
(1 << RXEN1)); \
} while (0)
#define PS2_USART_RX_POLL_ON() do { \
UCSR1B = (1 << RXEN1); \
} while (0)
#define PS2_USART_OFF() do { \
UCSR1C = 0; \
UCSR1B &= ~((1 << RXEN1) | \
(1 << TXEN1)); \
} while (0)
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
#define PS2_USART_RX_DATA UDR1
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
#define PS2_USART_RX_VECT USART1_RX_vect
#endif
2017-05-26 20:35:31 +02:00
#define MATRIX_COL_PINS { F1, F4, F5 }
#define MATRIX_ROW_PINS { F0 }
#define UNUSED_PINS
2017-05-26 20:35:31 +02:00
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
2017-05-26 20:35:31 +02:00
#define DEBOUNCING_DELAY 5
2017-05-26 20:35:31 +02:00
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE