qmk_firmware/keyboards/zinc/keymaps/ginjake/rules.mk

115 lines
3.8 KiB
Makefile
Raw Normal View History

# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
Remove Full Bootmagic (#13846) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-08-07 08:59:56 +02:00
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
2020-05-30 22:14:59 +02:00
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
2021-09-27 19:50:06 +02:00
LTO_ENABLE = no # if firmware size over limit, try this option
define ZINC_CUSTOMISE_MSG
$(info Zinc customize)
$(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE))
$(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
2020-05-30 22:14:59 +02:00
$(info - LED_BOTH_ENABLE=$(LED_BOTH_ENABLE))
$(info - LED_RGB_CONT=$(LED_RGB_CONT))
$(info - LED_ANIMATION=$(LED_ANIMATIONS))
$(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
endef
# Zinc keyboard customize
LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight)
2020-05-30 22:14:59 +02:00
LED_BOTH_ENABLE = no # LED backlight and underglow
LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc
LED_ANIMATIONS = yes # LED animations
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
#### Do not enable these with audio at the same time.
### Zinc keyboard 'default' keymap: convenient command line option
## make ZINC=<options> zinc:defualt
2020-05-30 22:14:59 +02:00
## option= back | under | both | cont | na | ios
## ex.
## make ZINC=under zinc:defualt
## make ZINC=under,ios zinc:defualt
## make ZINC=back zinc:default
## make ZINC=back,na zinc:default
## make ZINC=back,ios zinc:default
ifneq ($(strip $(ZINC)),)
ifeq ($(findstring back,$(ZINC)), back)
LED_BACK_ENABLE = yes
2020-05-30 22:14:59 +02:00
endif
ifeq ($(findstring under,$(ZINC)), under)
LED_UNDERGLOW_ENABLE = yes
endif
2020-05-30 22:14:59 +02:00
ifeq ($(findstring both,$(ZINC)), both)
LED_BOTH_ENABLE = yes
endif
ifeq ($(findstring cont,$(ZINC)), cont)
LED_RGB_CONT = yes
endif
ifeq ($(findstring na,$(ZINC)), na)
LED_ANIMATIONS = no
endif
ifeq ($(findstring ios,$(ZINC)), ios)
IOS_DEVICE_ENABLE = yes
endif
$(eval $(call ZINC_CUSTOMISE_MSG))
$(info )
endif
ifeq ($(strip $(LED_BACK_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
2020-05-30 22:14:59 +02:00
OPT_DEFS += -DRGBLED_BOTH
$(info LED_BOTH_ENABLE option is enabled instead of LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE)
else
OPT_DEFS += -DRGBLED_BACK
endif
else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
else
RGBLIGHT_ENABLE = no
endif
2020-05-30 22:14:59 +02:00
ifeq ($(strip $(LED_BOTH_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
OPT_DEFS += -DRGBLED_BOTH
endif
ifeq ($(strip $(LED_RGB_CONT)), yes)
OPT_DEFS += -DRGBLED_CONT
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
2020-05-30 22:14:59 +02:00
OPT_DEFS += -DIOS_DEVICE_ENABLE
endif
ifeq ($(strip $(LED_ANIMATIONS)), yes)
2020-05-30 22:14:59 +02:00
# OPT_DEFS += -DRGBLIGHT_ANIMATIONS
OPT_DEFS += -DLED_ANIMATIONS
endif
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# Uncomment these for debugging
# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
# $(info -- OPT_DEFS=$(OPT_DEFS))
# $(info )