qmk_firmware/keyboards/latin17rgb/config.h

101 lines
3.4 KiB
C
Raw Normal View History

/* Copyright 2021 18438880
2021-06-10 07:59:19 +02:00
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#include "config_common.h"
#define VENDOR_ID 0x7C88 // "hw" = haierwangwei2005
#define PRODUCT_ID 0x7C97 // "lp" = latin17RGB
#define DEVICE_VER 0x0001
#define MANUFACTURER 18438880
#define PRODUCT Latin17RGB
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 4
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS {C7, C6, B6, B5, B4 }
#define MATRIX_COL_PINS {F7, F6, F5, F4}
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 3
/* disable these deprecated features by default */
2021-10-28 22:02:22 +02:00
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#ifdef RGB_MATRIX_ENABLE
# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
2021-06-10 07:59:19 +02:00
# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
# define RGB_MATRIX_KEYPRESSES
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define DISABLE_RGB_MATRIX_BAND_SAT
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define DISABLE_RGB_MATRIX_SPLASH
# define DISABLE_RGB_MATRIX_MULTISPLASH
# define DISABLE_RGB_MATRIX_SOLID_SPLASH
# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0b1110100 AD <-> GND
// 0b1110111 AD <-> VCC
// 0b1110101 AD <-> SCL
// 0b1110110 AD <-> SDA
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110110
#define DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 25
#define DRIVER_2_LED_TOTAL 24
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
#endif
#define RGB_DI_PIN B7
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 8
#define RGBLIGHT_HUE_STEP 5
#define RGBLIGHT_SAT_STEP 5
#define RGBLIGHT_VAL_STEP 5
#define RGBLIGHT_SLEEP
#endif