diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.h b/drivers/usb2422.c
similarity index 68%
rename from tmk_core/protocol/arm_atsam/usb/usb2422.h
rename to drivers/usb2422.c
index b4830b5bc8f..62b919093b9 100644
--- a/tmk_core/protocol/arm_atsam/usb/usb2422.h
+++ b/drivers/usb2422.c
@@ -1,32 +1,25 @@
-/*
-Copyright 2018 Massdrop Inc.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _USB2422_H_
-#define _USB2422_H_
-
-#define REV_USB2422 0x100
-
-#define USB2422_ADDR 0x58  // I2C device address, one instance
-
-#define USB2422_HUB_ACTIVE_GROUP 0  // PA
-#define USB2422_HUB_ACTIVE_PIN 18   // 18
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <string.h>
+#include "usb2422.h"
+#include "i2c_master.h"
+#include "wait.h"
+#include "gpio.h"
 
 /* -------- USB2422_VID : (USB2422L Offset: 0x00) (R/W 16) Vendor ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint16_t VID_LSB : 8;
@@ -34,10 +27,8 @@ typedef union {
     } bit;        /*!< Structure used for bit  access                  */
     uint16_t reg; /*!< Type      used for register access              */
 } USB2422_VID_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_PID : (USB2422L Offset: 0x02) (R/W 16) Product ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint16_t PID_LSB : 8;
@@ -45,10 +36,8 @@ typedef union {
     } bit;        /*!< Structure used for bit  access                  */
     uint16_t reg; /*!< Type      used for register access              */
 } USB2422_PID_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_DID : (USB2422L Offset: 0x04) (R/W 16) Device ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint16_t DID_LSB : 8;
@@ -56,10 +45,8 @@ typedef union {
     } bit;        /*!< Structure used for bit  access                  */
     uint16_t reg; /*!< Type      used for register access              */
 } USB2422_DID_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_CFG1 : (USB2422L Offset: 0x06) (R/W 8) Configuration Data Byte 1-------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t PORT_PWR : 1;
@@ -72,10 +59,8 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_CFG1_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_CFG2 : (USB2422L Offset: 0x07) (R/W 8) Configuration Data Byte 2-------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t : 3;
@@ -86,10 +71,8 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_CFG2_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_CFG3 : (USB2422L Offset: 0x08) (R/W 16) Configuration Data Byte 3-------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t STRING_EN : 1;
@@ -99,10 +82,8 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_CFG3_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_NRD : (USB2422L Offset: 0x09) (R/W 8) Non Removable Device -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t : 5;
@@ -112,10 +93,8 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_NRD_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_PDS : (USB2422L Offset: 0x0A) (R/W 8) Port Diable for Self-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t : 1;
@@ -125,10 +104,9 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_PDS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_PDB : (USB2422L Offset: 0x0B) (R/W 8) Port Diable for Bus-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+
 typedef union {
     struct {
         uint8_t : 1;
@@ -138,125 +116,98 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_PDB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_MAXPS : (USB2422L Offset: 0x0C) (R/W 8) Max Power for Self-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t MAX_PWR_SP : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_MAXPS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_MAXPB : (USB2422L Offset: 0x0D) (R/W 8) Max Power for Bus-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t MAX_PWR_BP : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_MAXPB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_HCMCS : (USB2422L Offset: 0x0E) (R/W 8) Hub Controller Max Current for Self-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t HC_MAX_C_SP : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_HCMCS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_HCMCB : (USB2422L Offset: 0x0F) (R/W 8) Hub Controller Max Current for Bus-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t HC_MAX_C_BP : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_HCMCB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_PWRT : (USB2422L Offset: 0x10) (R/W 8) Power On Time -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t POWER_ON_TIME : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_PWRT_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_LANGID LSB : (USB2422L Offset: 0x11) (R/W 16) Language ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t LANGID_LSB : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_LANGID_LSB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_LANGID MSB : (USB2422L Offset: 0x12) (R/W 16) Language ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t LANGID_MSB : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_LANGID_MSB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_MFRSL : (USB2422L Offset: 0x13) (R/W 8) Manufacturer String Length -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t MFR_STR_LEN : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_MFRSL_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_PRDSL : (USB2422L Offset: 0x14) (R/W 8) Product String Length -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t PRD_STR_LEN : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_PRDSL_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_SERSL : (USB2422L Offset: 0x15) (R/W 8) Serial String Length -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t SER_STR_LEN : 8;
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_SERSL_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_MFRSTR : (USB2422L Offset: 0x16-53) (R/W 8) Maufacturer String -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef uint16_t USB2422_MFRSTR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_PRDSTR : (USB2422L Offset: 0x54-91) (R/W 8) Product String -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef uint16_t USB2422_PRDSTR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_SERSTR : (USB2422L Offset: 0x92-CF) (R/W 8) Serial String -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef uint16_t USB2422_SERSTR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_BCEN : (USB2422L Offset: 0xD0) (R/W 8) Battery Charging Enable -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+
 typedef union {
     struct {
         uint8_t : 1;
@@ -266,10 +217,8 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_BCEN_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_BOOSTUP : (USB2422L Offset: 0xF6) (R/W 8) Boost Upstream -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t BOOST : 2;
@@ -277,10 +226,8 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_BOOSTUP_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_BOOSTDOWN : (USB2422L Offset: 0xF8) (R/W 8) Boost Downstream -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t BOOST1 : 2;
@@ -289,10 +236,8 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_BOOSTDOWN_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_PRTSP : (USB2422L Offset: 0xFA) (R/W 8) Port Swap -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t : 1;
@@ -302,10 +247,8 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_PRTSP_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /* -------- USB2422_PRTR12 : (USB2422L Offset: 0xFB) (R/W 8) Port 1/2 Remap -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t PORT1_REMAP : 4;
@@ -313,7 +256,7 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_PRTR12_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
 #define USB2422_PRTR12_DISABLE 0
 #define USB2422_PRT12_P2TOL1 1
 #define USB2422_PRT12_P2XTOL2 2
@@ -321,7 +264,6 @@ typedef union {
 #define USB2422_PRT12_P1XTOL2 2
 
 /* -------- USB2422_STCD : (USB2422L Offset: 0xFF) (R/W 8) Status Command -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef union {
     struct {
         uint8_t USB_ATTACH : 1;
@@ -331,10 +273,8 @@ typedef union {
     } bit;       /*!< Structure used for bit  access                  */
     uint8_t reg; /*!< Type      used for register access              */
 } USB2422_STCD_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
 
 /** \brief USB2422 device hardware registers */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 typedef struct {
     USB2422_VID_Type        VID;        /**< \brief Offset: 0x00*/
     USB2422_PID_Type        PID;        /**< \brief Offset: 0x02*/
@@ -368,35 +308,95 @@ typedef struct {
     USB2422_PRTR12_Type     PRTR12; /**< \brief Offset: 0xFB*/
     uint8_t                 Reserved4[0x3];
     USB2422_STCD_Type       STCD; /**< \brief Offset: 0xFF*/
-} Usb2422;
+} Usb2422_t;
+
+// ***************************************************************
+
+static Usb2422_t config;
+
+// ***************************************************************
+
+/** \brief Handle the conversion to allow simple strings
+ */
+static void USB2422_strcpy(const char* str, USB2422_MFRSTR_Type* dest, uint8_t len) {
+    for (uint8_t i = 0; i < len; i++) {
+        dest[i] = str[i];
+    }
+}
+
+/** \brief Handle the conversion to allow simple strings
+ */
+static void USB2422_write_block(void) {
+    static unsigned char i2c0_buf[34];
+
+    unsigned char* dest = i2c0_buf;
+    unsigned char* src;
+    unsigned char* base = (unsigned char*)&config;
+
+    for (src = base; src < base + 256; src += 32) {
+        dest[0] = src - base;
+        dest[1] = 32;
+        memcpy(&dest[2], src, 32);
+        i2c_transmit(USB2422_ADDRESS, dest, 34, 50000);
+        wait_us(100);
+    }
+}
+
+// ***************************************************************
+
+void USB2422_init() {
+#ifdef USB2422_RESET_PIN
+    setPinOutput(USB2422_RESET_PIN);
+#endif
+#ifdef USB2422_ACTIVE_PIN
+    setPinInput(USB2422_ACTIVE_PIN);
 #endif
 
-#define PORT_DETECT_RETRY_INTERVAL 2000
+    i2c_init();  // IC2 clk must be high at USB2422 reset release time to signal SMB configuration
+}
 
-#define USB_EXTRA_ADC_THRESHOLD 900
+void USB2422_configure() {
+    static const char SERNAME[] = "Unavailable";
 
-#define USB_EXTRA_STATE_DISABLED 0
-#define USB_EXTRA_STATE_ENABLED 1
-#define USB_EXTRA_STATE_UNKNOWN 2
-#define USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG 3
+    memset(&config, 0, sizeof(Usb2422_t));
 
-#define USB_HOST_PORT_1 0
-#define USB_HOST_PORT_2 1
-#define USB_HOST_PORT_UNKNOWN 2
+    // configure Usb2422 registers
+    config.VID.reg               = USB2422_VENDOR_ID;
+    config.PID.reg               = USB2422_PRODUCT_ID;
+    config.DID.reg               = USB2422_DEVICE_VER;  // BCD format, eg 01.01
+    config.CFG1.bit.SELF_BUS_PWR = 1;                   // self powered for now
+    config.CFG1.bit.HS_DISABLE   = 1;                   // full or high speed
+    // config.CFG2.bit.COMPOUND = 0; // compound device
+    config.CFG3.bit.STRING_EN = 1;  // strings enabled
+    // config.NRD.bit.PORT2_NR = 0; // MCU is non-removable
+    config.MAXPB.reg = 20;  // 0mA
+    config.HCMCB.reg = 20;  // 0mA
+    config.MFRSL.reg = sizeof(USB2422_MANUFACTURER);
+    config.PRDSL.reg = sizeof(USB2422_PRODUCT);
+    config.SERSL.reg = sizeof(SERNAME);
+    USB2422_strcpy(USB2422_MANUFACTURER, config.MFRSTR, sizeof(USB2422_MANUFACTURER));
+    USB2422_strcpy(USB2422_PRODUCT, config.PRDSTR, sizeof(USB2422_PRODUCT));
+    USB2422_strcpy(SERNAME, config.SERSTR, sizeof(SERNAME));
+    // config.BOOSTUP.bit.BOOST=3;    //upstream port
+    // config.BOOSTDOWN.bit.BOOST1=0; // extra port
+    // config.BOOSTDOWN.bit.BOOST2=2; //MCU is close
+    config.STCD.bit.USB_ATTACH = 1;
 
-extern uint8_t usb_host_port;
-extern uint8_t usb_extra_state;
-extern uint8_t usb_extra_manual;
-extern uint8_t usb_gcr_auto;
+    USB2422_write_block();
+}
 
-void     USB2422_init(void);
-void     USB_reset(void);
-void     USB_configure(void);
-uint16_t USB_active(void);
-void     USB_set_host_by_voltage(void);
-uint16_t adc_get(uint8_t muxpos);
-uint8_t  USB2422_Port_Detect_Init(void);
-void     USB_HandleExtraDevice(void);
-void     USB_ExtraSetState(uint8_t state);
+void USB2422_reset() {
+#ifdef USB2422_RESET_PIN
+    writePinLow(USB2422_RESET_PIN);
+    wait_us(2);
+    writePinHigh(USB2422_RESET_PIN);
+#endif
+}
 
-#endif  //_USB2422_H_
+bool USB2422_active() {
+#ifdef USB2422_ACTIVE_PIN
+    return readPin(USB2422_ACTIVE_PIN);
+#else
+    return 1;
+#endif
+}
diff --git a/drivers/usb2422.h b/drivers/usb2422.h
new file mode 100644
index 00000000000..2e435b02bc9
--- /dev/null
+++ b/drivers/usb2422.h
@@ -0,0 +1,59 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include <stdbool.h>
+
+#ifndef USB2422_ADDRESS
+#    define USB2422_ADDRESS 0x58
+#endif
+
+#ifndef USB2422_VENDOR_ID
+#    define USB2422_VENDOR_ID 0xFEED
+#endif
+#ifndef USB2422_PRODUCT_ID
+#    define USB2422_PRODUCT_ID 0x0001
+#endif
+#ifndef USB2422_DEVICE_VER
+#    define USB2422_DEVICE_VER 0x0001
+#endif
+
+#ifndef USB2422_MANUFACTURER
+#    define USB2422_MANUFACTURER "QMK"
+#endif
+#ifndef USB2422_PRODUCT
+#    define USB2422_PRODUCT "QMK Hub"
+#endif
+
+/** \brief Initialises the dependent subsystems */
+void USB2422_init(void);
+
+/** \brief Push configuration to the USB2422 device */
+void USB2422_configure(void);
+
+/** \brief Reset the chip (RESET_N)
+ *
+ * NOTE:
+ * Depends on a valid USB2422_RESET_PIN configuration
+ */
+void USB2422_reset(void);
+
+/** \brief Indicates the USB state of the hub (SUSP_IND)
+ *
+ * NOTE:
+ * Depends on a valid USB2422_ACTIVE_PIN configuration
+ */
+bool USB2422_active(void);
diff --git a/keyboards/massdrop/alt/alt.h b/keyboards/massdrop/alt/alt.h
index 03960954506..c3761bee8ba 100644
--- a/keyboards/massdrop/alt/alt.h
+++ b/keyboards/massdrop/alt/alt.h
@@ -7,7 +7,7 @@
 #include "i2c_master.h"
 #include "md_rgb_matrix.h" //For led keycodes
 #include "usb/udi_cdc.h"
-#include "usb/usb2422.h"
+#include "usb/usb_hub.h"
 
 #define LAYOUT_65_ansi_blocker( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \
diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h
index 085e1aebbae..c37949a74b6 100644
--- a/keyboards/massdrop/alt/config.h
+++ b/keyboards/massdrop/alt/config.h
@@ -90,6 +90,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEBUG_BOOT_TRACING_PORT     PB
 #define DEBUG_BOOT_TRACING_PIN      23
 
+/* USB2422 config */
+#define USB2422_ADDRESS 0x58
+#define USB2422_VENDOR_ID 0x04D8
+#define USB2422_PRODUCT_ID 0xEEC5
+#define USB2422_DEVICE_VER 0x0101
+#define USB2422_MANUFACTURER "Massdrop Inc."
+#define USB2422_PRODUCT "Massdrop Hub"
+#define USB2422_ACTIVE_PIN A18
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h
index aefb9004486..fe8b6002341 100644
--- a/keyboards/massdrop/ctrl/config.h
+++ b/keyboards/massdrop/ctrl/config.h
@@ -89,6 +89,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEBUG_BOOT_TRACING_PORT     PB
 #define DEBUG_BOOT_TRACING_PIN      23
 
+/* USB2422 config */
+#define USB2422_ADDRESS 0x58
+#define USB2422_VENDOR_ID 0x04D8
+#define USB2422_PRODUCT_ID 0xEEC5
+#define USB2422_DEVICE_VER 0x0101
+#define USB2422_MANUFACTURER "Massdrop Inc."
+#define USB2422_PRODUCT "Massdrop Hub"
+#define USB2422_ACTIVE_PIN A18
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
diff --git a/keyboards/massdrop/ctrl/ctrl.h b/keyboards/massdrop/ctrl/ctrl.h
index 1650beb9a44..a3d66ba7755 100644
--- a/keyboards/massdrop/ctrl/ctrl.h
+++ b/keyboards/massdrop/ctrl/ctrl.h
@@ -7,7 +7,7 @@
 #include "i2c_master.h"
 #include "md_rgb_matrix.h" //For led keycodes
 #include "usb/udi_cdc.h"
-#include "usb/usb2422.h"
+#include "usb/usb_hub.h"
 
 #define LAYOUT( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \
diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam.mk
index e3b55059662..ffd1fa9f502 100644
--- a/tmk_core/protocol/arm_atsam.mk
+++ b/tmk_core/protocol/arm_atsam.mk
@@ -20,10 +20,12 @@ SRC += $(ARM_ATSAM_DIR)/usb/udi_hid.c
 SRC += $(ARM_ATSAM_DIR)/usb/udi_hid_kbd.c
 SRC += $(ARM_ATSAM_DIR)/usb/udi_hid_kbd_desc.c
 SRC += $(ARM_ATSAM_DIR)/usb/ui.c
-SRC += $(ARM_ATSAM_DIR)/usb/usb2422.c
 SRC += $(ARM_ATSAM_DIR)/usb/usb.c
 SRC += $(ARM_ATSAM_DIR)/usb/usb_device_udd.c
+SRC += $(ARM_ATSAM_DIR)/usb/usb_hub.c
 SRC += $(ARM_ATSAM_DIR)/usb/usb_util.c
 
+SRC += $(DRIVER_PATH)/usb2422.c
+
 # Search Path
 VPATH += $(TMK_DIR)/$(ARM_ATSAM_DIR)
diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
index c3eab39fb18..e1749f872da 100644
--- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
+++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
@@ -29,7 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "i2c_master.h"
 #include "shift_register.h"
 
-#include "./usb/usb2422.h"
+#include "./usb/usb_hub.h"
 
 #ifndef MD_BOOTLOADER
 
diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c
index dda2f85b001..af046625f43 100644
--- a/tmk_core/protocol/arm_atsam/i2c_master.c
+++ b/tmk_core/protocol/arm_atsam/i2c_master.c
@@ -564,4 +564,23 @@ uint8_t i2c_led_q_run(void) {
 
     return 1;
 }
+
+__attribute__((weak)) void i2c_init(void) {
+    static bool is_initialised = false;
+    if (!is_initialised) {
+        is_initialised = true;
+
+        i2c0_init();
+    }
+}
+
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout) {
+    uint8_t ret                 = i2c0_transmit(address, (uint8_t *)data, length, timeout);
+    SERCOM0->I2CM.CTRLB.bit.CMD = 0x03;
+    while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) {
+        DBGC(DC_USB_WRITE2422_BLOCK_SYNC_SYSOP);
+    }
+    return ret ? I2C_STATUS_SUCCESS : I2C_STATUS_ERROR;
+}
+
 #endif  // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)
diff --git a/tmk_core/protocol/arm_atsam/i2c_master.h b/tmk_core/protocol/arm_atsam/i2c_master.h
index 68773f213fb..e11235d4476 100644
--- a/tmk_core/protocol/arm_atsam/i2c_master.h
+++ b/tmk_core/protocol/arm_atsam/i2c_master.h
@@ -101,4 +101,13 @@ void    i2c0_init(void);
 uint8_t i2c0_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout);
 void    i2c0_stop(void);
 
+// Terrible interface compatiblity...
+#define I2C_STATUS_SUCCESS (0)
+#define I2C_STATUS_ERROR (-1)
+
+typedef int16_t i2c_status_t;
+
+void         i2c_init(void);
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout);
+
 #endif  // _I2C_MASTER_H_
diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c
index 858b4cd9fc0..1df5112ed8a 100644
--- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c
+++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c
@@ -296,7 +296,7 @@ int main(void) {
 
     matrix_init();
 
-    USB2422_init();
+    USB_Hub_init();
 
     DBGC(DC_MAIN_UDC_START_BEGIN);
     udc_start();
@@ -306,7 +306,7 @@ int main(void) {
     CDC_init();
     DBGC(DC_MAIN_CDC_INIT_COMPLETE);
 
-    while (USB2422_Port_Detect_Init() == 0) {
+    while (USB_Hub_Port_Detect_Init() == 0) {
     }
 
     DBG_LED_OFF;
diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb_hub.c
similarity index 67%
rename from tmk_core/protocol/arm_atsam/usb/usb2422.c
rename to tmk_core/protocol/arm_atsam/usb/usb_hub.c
index a878cb6b7ca..c5fd284aab7 100644
--- a/tmk_core/protocol/arm_atsam/usb/usb2422.c
+++ b/tmk_core/protocol/arm_atsam/usb/usb_hub.c
@@ -16,25 +16,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "arm_atsam_protocol.h"
+#include "drivers/usb2422.h"
 #include <string.h>
 
-Usb2422       USB2422_shadow;
-unsigned char i2c0_buf[34];
-
-const uint16_t MFRNAME[] = {'M', 'a', 's', 's', 'd', 'r', 'o', 'p', ' ', 'I', 'n', 'c', '.'};  // Massdrop Inc.
-const uint16_t PRDNAME[] = {'M', 'a', 's', 's', 'd', 'r', 'o', 'p', ' ', 'H', 'u', 'b'};       // Massdrop Hub
-#ifndef MD_BOOTLOADER
-// Serial number reported stops before first found space character or at last found character
-const uint16_t SERNAME[] = {'U', 'n', 'a', 'v', 'a', 'i', 'l', 'a', 'b', 'l', 'e'};  // Unavailable
-#else
-// In production, this field is found, modified, and offset noted as the last 32-bit word in the bootloader space
-// The offset allows the application to use the factory programmed serial (which may differ from the physical serial label)
-// Serial number reported stops before first found space character or when max size is reached
-__attribute__((__aligned__(4))) const uint16_t SERNAME[BOOTLOADER_SERIAL_MAX_SIZE] = {'M', 'D', 'H', 'U', 'B', 'B', 'O', 'O', 'T', 'L', '0', '0', '0', '0', '0', '0', '0', '0', '0', '0'};
-// NOTE: Serial replacer will not write a string longer than given here as a precaution, so give enough
-//      space as needed and adjust BOOTLOADER_SERIAL_MAX_SIZE to match amount given
-#endif  // MD_BOOTLOADER
-
 uint8_t usb_host_port;
 
 #ifndef MD_BOOTLOADER
@@ -47,29 +31,7 @@ uint8_t usb_gcr_auto;
 
 uint16_t adc_extra;
 
-void USB_write2422_block(void) {
-    unsigned char *dest = i2c0_buf;
-    unsigned char *src;
-    unsigned char *base = (unsigned char *)&USB2422_shadow;
-
-    DBGC(DC_USB_WRITE2422_BLOCK_BEGIN);
-
-    for (src = base; src < base + 256; src += 32) {
-        dest[0] = src - base;
-        dest[1] = 32;
-        memcpy(&dest[2], src, 32);
-        i2c0_transmit(USB2422_ADDR, dest, 34, 50000);
-        SERCOM0->I2CM.CTRLB.bit.CMD = 0x03;
-        while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) {
-            DBGC(DC_USB_WRITE2422_BLOCK_SYNC_SYSOP);
-        }
-        wait_us(100);
-    }
-
-    DBGC(DC_USB_WRITE2422_BLOCK_COMPLETE);
-}
-
-void USB2422_init(void) {
+void USB_Hub_init(void) {
     Gclk *   pgclk = GCLK;
     Mclk *   pmclk = MCLK;
     Port *   pport = PORT;
@@ -147,9 +109,7 @@ void USB2422_init(void) {
     pusb->DEVICE.QOSCTRL.bit.DQOS = 2;
     pusb->DEVICE.QOSCTRL.bit.CQOS = 2;
 
-    pport->Group[USB2422_HUB_ACTIVE_GROUP].PINCFG[USB2422_HUB_ACTIVE_PIN].bit.INEN = 1;
-
-    i2c0_init();  // IC2 clk must be high at USB2422 reset release time to signal SMB configuration
+    USB2422_init();
 
     sr_exp_data.bit.HUB_CONNECT = 1;  // connect signal
     sr_exp_data.bit.HUB_RESET_N = 1;  // reset high
@@ -181,62 +141,16 @@ void USB_reset(void) {
 }
 
 void USB_configure(void) {
-    Usb2422 *pusb2422 = &USB2422_shadow;
-    memset(pusb2422, 0, sizeof(Usb2422));
-
-    uint16_t *serial_use    = (uint16_t *)SERNAME;                 // Default to use SERNAME from this file
-    uint8_t   serial_length = sizeof(SERNAME) / sizeof(uint16_t);  // Default to use SERNAME from this file
-#ifndef MD_BOOTLOADER
-    uint32_t serial_ptrloc = (uint32_t)&_srom - 4;
-#else                                                      // MD_BOOTLOADER
-    uint32_t serial_ptrloc = (uint32_t)&_erom - 4;
-#endif                                                     // MD_BOOTLOADER
-    uint32_t serial_address = *(uint32_t *)serial_ptrloc;  // Address of bootloader's serial number if available
-
     DBGC(DC_USB_CONFIGURE_BEGIN);
 
-    if (serial_address != 0xFFFFFFFF && serial_address < serial_ptrloc)  // Check for factory programmed serial address
-    {
-        if ((serial_address & 0xFF) % 4 == 0)  // Check alignment
-        {
-            serial_use    = (uint16_t *)(serial_address);
-            serial_length = 0;
-            while ((*(serial_use + serial_length) > 32 && *(serial_use + serial_length) < 127) && serial_length < BOOTLOADER_SERIAL_MAX_SIZE) {
-                serial_length++;
-                DBGC(DC_USB_CONFIGURE_GET_SERIAL);
-            }
-        }
-    }
-
-    // configure Usb2422 registers
-    pusb2422->VID.reg               = 0x04D8;  // from Microchip 4/19/2018
-    pusb2422->PID.reg               = 0xEEC5;  // from Microchip 4/19/2018 = Massdrop, Inc. USB Hub
-    pusb2422->DID.reg               = 0x0101;  // BCD 01.01
-    pusb2422->CFG1.bit.SELF_BUS_PWR = 1;       // self powered for now
-    pusb2422->CFG1.bit.HS_DISABLE   = 1;       // full or high speed
-    // pusb2422->CFG2.bit.COMPOUND = 0; // compound device
-    pusb2422->CFG3.bit.STRING_EN = 1;  // strings enabled
-    // pusb2422->NRD.bit.PORT2_NR = 0; // MCU is non-removable
-    pusb2422->MAXPB.reg = 20;  // 0mA
-    pusb2422->HCMCB.reg = 20;  // 0mA
-    pusb2422->MFRSL.reg = sizeof(MFRNAME) / sizeof(uint16_t);
-    pusb2422->PRDSL.reg = sizeof(PRDNAME) / sizeof(uint16_t);
-    pusb2422->SERSL.reg = serial_length;
-    memcpy(pusb2422->MFRSTR, MFRNAME, sizeof(MFRNAME));
-    memcpy(pusb2422->PRDSTR, PRDNAME, sizeof(PRDNAME));
-    memcpy(pusb2422->SERSTR, serial_use, serial_length * sizeof(uint16_t));
-    // pusb2422->BOOSTUP.bit.BOOST=3;    //upstream port
-    // pusb2422->BOOSTDOWN.bit.BOOST1=0; // extra port
-    // pusb2422->BOOSTDOWN.bit.BOOST2=2; //MCU is close
-    pusb2422->STCD.bit.USB_ATTACH = 1;
-    USB_write2422_block();
+    USB2422_configure();
 
     adc_extra = 0;
 
     DBGC(DC_USB_CONFIGURE_COMPLETE);
 }
 
-uint16_t USB_active(void) { return (PORT->Group[USB2422_HUB_ACTIVE_GROUP].IN.reg & (1 << USB2422_HUB_ACTIVE_PIN)) != 0; }
+uint16_t USB_active(void) { return USB2422_active(); }
 
 void USB_set_host_by_voltage(void) {
     // UP is upstream device (HOST)
@@ -314,7 +228,7 @@ void USB_set_host_by_voltage(void) {
     DBGC(DC_USB_SET_HOST_BY_VOLTAGE_COMPLETE);
 }
 
-uint8_t USB2422_Port_Detect_Init(void) {
+uint8_t USB_Hub_Port_Detect_Init(void) {
     uint32_t port_detect_retry_ms;
     uint32_t tmod;
 
diff --git a/tmk_core/protocol/arm_atsam/usb/usb_hub.h b/tmk_core/protocol/arm_atsam/usb/usb_hub.h
new file mode 100644
index 00000000000..76b1e0a3263
--- /dev/null
+++ b/tmk_core/protocol/arm_atsam/usb/usb_hub.h
@@ -0,0 +1,51 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _USB2422_H_
+#define _USB2422_H_
+
+#define REV_USB2422 0x100
+
+#define PORT_DETECT_RETRY_INTERVAL 2000
+
+#define USB_EXTRA_ADC_THRESHOLD 900
+
+#define USB_EXTRA_STATE_DISABLED 0
+#define USB_EXTRA_STATE_ENABLED 1
+#define USB_EXTRA_STATE_UNKNOWN 2
+#define USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG 3
+
+#define USB_HOST_PORT_1 0
+#define USB_HOST_PORT_2 1
+#define USB_HOST_PORT_UNKNOWN 2
+
+extern uint8_t usb_host_port;
+extern uint8_t usb_extra_state;
+extern uint8_t usb_extra_manual;
+extern uint8_t usb_gcr_auto;
+
+void     USB_Hub_init(void);
+uint8_t  USB_Hub_Port_Detect_Init(void);
+void     USB_reset(void);
+void     USB_configure(void);
+uint16_t USB_active(void);
+void     USB_set_host_by_voltage(void);
+uint16_t adc_get(uint8_t muxpos);
+void     USB_HandleExtraDevice(void);
+void     USB_ExtraSetState(uint8_t state);
+
+#endif  //_USB2422_H_