haptic: Feature to disable it when usb port is not configured or suspended. (#12692)

This also add support for specifying a LED pin to indicate haptic status,
and also adds support for a haptic-enable pin, which is useful to turn off
the boost converter on the solenoid driver.
This commit is contained in:
Purdea Andrei 2021-11-02 07:54:29 +02:00 committed by GitHub
parent 85d94d0c4d
commit 76fb54403c
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
7 changed files with 115 additions and 11 deletions

View file

@ -11,6 +11,16 @@ HAPTIC_DRIVER += DRV2605L
HAPTIC_DRIVER += SOLENOID
```
The following `config.h` settings are available for all types of haptic feedback:
| Settings | Default | Description |
|--------------------------------------|---------------|---------------------------------------------------------------------------------------------------------------|
|`HAPTIC_ENABLE_PIN` | *Not defined* |Configures a pin to enable a boost converter for some haptic solution, often used with solenoid drivers. |
|`HAPTIC_ENABLE_PIN_ACTIVE_LOW` | *Not defined* |If defined then the haptic enable pin is active-low. |
|`HAPTIC_ENABLE_STATUS_LED` | *Not defined* |Configures a pin to reflect the current enabled/disabled status of haptic feedback. |
|`HAPTIC_ENABLE_STATUS_LED_ACTIVE_LOW` | *Not defined* |If defined then the haptic status led will be active-low. |
|`HAPTIC_OFF_IN_LOW_POWER` | `0` |If set to `1`, haptic feedback is disabled before the device is configured, and while the device is suspended. |
## Known Supported Hardware
| Name | Description |
@ -48,6 +58,7 @@ First you will need a build a circuit to drive the solenoid through a mosfet as
| Settings | Default | Description |
|----------------------------|----------------------|-------------------------------------------------------|
|`SOLENOID_PIN` | *Not defined* |Configures the pin that the Solenoid is connected to. |
|`SOLENOID_PIN_ACTIVE_LOW` | *Not defined* |If defined then the solenoid trigger pin is active low.|
|`SOLENOID_DEFAULT_DWELL` | `12` ms |Configures the default dwell time for the solenoid. |
|`SOLENOID_MIN_DWELL` | `4` ms |Sets the lower limit for the dwell. |
|`SOLENOID_MAX_DWELL` | `100` ms |Sets the upper limit for the dwell. |

View file

@ -19,6 +19,7 @@
#include "solenoid.h"
#include "haptic.h"
#include "gpio.h"
#include "usb_device_state.h"
bool solenoid_on = false;
bool solenoid_buzzing = false;
@ -36,7 +37,7 @@ void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); }
void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; }
void solenoid_stop(void) {
writePinLow(SOLENOID_PIN);
SOLENOID_PIN_WRITE_INACTIVE();
solenoid_on = false;
solenoid_buzzing = false;
}
@ -48,7 +49,7 @@ void solenoid_fire(void) {
solenoid_on = true;
solenoid_buzzing = true;
solenoid_start = timer_read();
writePinHigh(SOLENOID_PIN);
SOLENOID_PIN_WRITE_ACTIVE();
}
void solenoid_check(void) {
@ -69,20 +70,23 @@ void solenoid_check(void) {
if ((elapsed % (SOLENOID_BUZZ_ACTUATED + SOLENOID_BUZZ_NONACTUATED)) < SOLENOID_BUZZ_ACTUATED) {
if (!solenoid_buzzing) {
solenoid_buzzing = true;
writePinHigh(SOLENOID_PIN);
SOLENOID_PIN_WRITE_ACTIVE();
}
} else {
if (solenoid_buzzing) {
solenoid_buzzing = false;
writePinLow(SOLENOID_PIN);
SOLENOID_PIN_WRITE_INACTIVE();
}
}
}
}
void solenoid_setup(void) {
SOLENOID_PIN_WRITE_INACTIVE();
setPinOutput(SOLENOID_PIN);
solenoid_fire();
if ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED)) {
solenoid_fire();
}
}
void solenoid_shutdown(void) { writePinLow(SOLENOID_PIN); }
void solenoid_shutdown(void) { SOLENOID_PIN_WRITE_INACTIVE(); }

View file

@ -49,6 +49,14 @@
# error SOLENOID_PIN not defined
#endif
#ifdef SOLENOID_PIN_ACTIVE_LOW
# define SOLENOID_PIN_WRITE_ACTIVE() writePinLow(SOLENOID_PIN)
# define SOLENOID_PIN_WRITE_INACTIVE() writePinHigh(SOLENOID_PIN)
#else
# define SOLENOID_PIN_WRITE_ACTIVE() writePinHigh(SOLENOID_PIN)
# define SOLENOID_PIN_WRITE_INACTIVE() writePinLow(SOLENOID_PIN)
#endif
void solenoid_buzz_on(void);
void solenoid_buzz_off(void);
void solenoid_set_buzz(int buzz);

View file

@ -17,6 +17,8 @@
#include "haptic.h"
#include "eeconfig.h"
#include "debug.h"
#include "usb_device_state.h"
#include "gpio.h"
#ifdef DRV2605L
# include "DRV2605L.h"
#endif
@ -26,6 +28,29 @@
haptic_config_t haptic_config;
static void update_haptic_enable_gpios(void) {
if (haptic_config.enable && ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED))) {
#if defined(HAPTIC_ENABLE_PIN)
HAPTIC_ENABLE_PIN_WRITE_ACTIVE();
#endif
#if defined(HAPTIC_ENABLE_STATUS_LED)
HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE();
#endif
} else {
#if defined(HAPTIC_ENABLE_PIN)
HAPTIC_ENABLE_PIN_WRITE_INACTIVE();
#endif
#if defined(HAPTIC_ENABLE_STATUS_LED)
HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE();
#endif
}
}
static void set_haptic_config_enable(bool enabled) {
haptic_config.enable = enabled;
update_haptic_enable_gpios();
}
void haptic_init(void) {
if (!eeconfig_is_enabled()) {
eeconfig_init();
@ -44,6 +69,10 @@ void haptic_init(void) {
// or the previous firmware didn't have solenoid enabled,
// and the current one has solenoid enabled.
haptic_reset();
} else {
// Haptic configuration has been loaded through the "raw" union item.
// This is to execute any side effects of the configuration.
set_haptic_config_enable(haptic_config.enable);
}
#ifdef SOLENOID_ENABLE
solenoid_setup();
@ -54,6 +83,12 @@ void haptic_init(void) {
dprintf("DRV2605 driver initialized\n");
#endif
eeconfig_debug_haptic();
#ifdef HAPTIC_ENABLE_PIN
setPinOutput(HAPTIC_ENABLE_PIN);
#endif
#ifdef HAPTIC_ENABLE_STATUS_LED
setPinOutput(HAPTIC_ENABLE_STATUS_LED);
#endif
}
void haptic_task(void) {
@ -69,13 +104,13 @@ void eeconfig_debug_haptic(void) {
}
void haptic_enable(void) {
haptic_config.enable = 1;
set_haptic_config_enable(true);
xprintf("haptic_config.enable = %u\n", haptic_config.enable);
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_disable(void) {
haptic_config.enable = 0;
set_haptic_config_enable(false);
xprintf("haptic_config.enable = %u\n", haptic_config.enable);
eeconfig_update_haptic(haptic_config.raw);
}
@ -157,7 +192,7 @@ void haptic_dwell_decrease(void) {
}
void haptic_reset(void) {
haptic_config.enable = true;
set_haptic_config_enable(true);
uint8_t feedback = HAPTIC_FEEDBACK_DEFAULT;
haptic_config.feedback = feedback;
#ifdef DRV2605L
@ -293,3 +328,13 @@ void haptic_shutdown(void) {
solenoid_shutdown();
#endif
}
void haptic_notify_usb_device_state_change(void) {
update_haptic_enable_gpios();
#if defined(HAPTIC_ENABLE_PIN)
setPinOutput(HAPTIC_ENABLE_PIN);
#endif
#if defined(HAPTIC_ENABLE_STATUS_LED)
setPinOutput(HAPTIC_ENABLE_STATUS_LED);
#endif
}

View file

@ -75,3 +75,30 @@ void haptic_cont_decrease(void);
void haptic_play(void);
void haptic_shutdown(void);
void haptic_notify_usb_device_state_change(void);
#ifdef HAPTIC_ENABLE_PIN_ACTIVE_LOW
# ifndef HAPTIC_ENABLE_PIN
# error HAPTIC_ENABLE_PIN not defined
# endif
# define HAPTIC_ENABLE_PIN_WRITE_ACTIVE() writePinLow(HAPTIC_ENABLE_PIN)
# define HAPTIC_ENABLE_PIN_WRITE_INACTIVE() writePinHigh(HAPTIC_ENABLE_PIN)
#else
# define HAPTIC_ENABLE_PIN_WRITE_ACTIVE() writePinHigh(HAPTIC_ENABLE_PIN)
# define HAPTIC_ENABLE_PIN_WRITE_INACTIVE() writePinLow(HAPTIC_ENABLE_PIN)
#endif
#ifdef HAPTIC_ENABLE_STATUS_LED_ACTIVE_LOW
# ifndef HAPTIC_ENABLE_STATUS_LED
# error HAPTIC_ENABLE_STATUS_LED not defined
# endif
# define HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE() writePinLow(HAPTIC_ENABLE_STATUS_LED)
# define HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE() writePinHigh(HAPTIC_ENABLE_STATUS_LED)
#else
# define HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE() writePinHigh(HAPTIC_ENABLE_STATUS_LED)
# define HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE() writePinLow(HAPTIC_ENABLE_STATUS_LED)
#endif
#ifndef HAPTIC_OFF_IN_LOW_POWER
# define HAPTIC_OFF_IN_LOW_POWER 0
#endif

View file

@ -17,6 +17,7 @@
#include "process_haptic.h"
#include "quantum_keycodes.h"
#include "action_tapping.h"
#include "usb_device_state.h"
__attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
@ -131,7 +132,7 @@ bool process_haptic(uint16_t keycode, keyrecord_t *record) {
}
}
if (haptic_get_enable()) {
if (haptic_get_enable() && ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED))) {
if (record->event.pressed) {
// keypress
if (haptic_get_feedback() < 2 && get_haptic_enabled_key(keycode, record)) {

View file

@ -16,6 +16,9 @@
*/
#include "usb_device_state.h"
#if defined(HAPTIC_ENABLE)
# include "haptic.h"
#endif
enum usb_device_state usb_device_state = USB_DEVICE_STATE_NO_INIT;
@ -23,7 +26,12 @@ __attribute__((weak)) void notify_usb_device_state_change_kb(enum usb_device_sta
__attribute__((weak)) void notify_usb_device_state_change_user(enum usb_device_state usb_device_state) {}
static void notify_usb_device_state_change(enum usb_device_state usb_device_state) { notify_usb_device_state_change_kb(usb_device_state); }
static void notify_usb_device_state_change(enum usb_device_state usb_device_state) {
#if defined(HAPTIC_ENABLE) && HAPTIC_OFF_IN_LOW_POWER
haptic_notify_usb_device_state_change();
#endif
notify_usb_device_state_change_kb(usb_device_state);
}
void usb_device_state_set_configuration(bool isConfigured, uint8_t configurationNumber) {
usb_device_state = isConfigured ? USB_DEVICE_STATE_CONFIGURED : USB_DEVICE_STATE_INIT;