Consolidate some EEPROM Driver configuration (#22321)

This commit is contained in:
Joel Challis 2023-10-23 00:37:27 +01:00 committed by GitHub
parent 79094d3f72
commit bf6f13a2b0
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
21 changed files with 28 additions and 70 deletions

View file

@ -66,6 +66,14 @@ Currently QMK supports 25xx-series chips over SPI. As such, requires a working s
`#define EXTERNAL_EEPROM_PAGE_SIZE` | `32` | Page size of the EEPROM in bytes, as specified in the datasheet
`#define EXTERNAL_EEPROM_ADDRESS_SIZE` | `2` | The number of bytes to transmit for the memory location within the EEPROM
Default values and extended descriptions can be found in `drivers/eeprom/eeprom_spi.h`.
Alternatively, there are pre-defined hardware configurations for available chips/modules:
Module | Equivalent `#define` | Source
-----------------|---------------------------------|------------------------------------------
MB85RS64V FRAM | `define EEPROM_SPI_MB85RS64V` | <https://www.adafruit.com/product/1897>
!> There's no way to determine if there is an SPI EEPROM actually responding. Generally, this will result in reads of nothing but zero.
## Transient Driver configuration :id=transient-eeprom-driver-configuration

View file

@ -16,6 +16,18 @@
#pragma once
/*
Default device configurations:
For the Adafruit SPI Non-Volatile FRAM Breakout: https://www.adafruit.com/product/1897
#define EEPROM_SPI_MB85RS64V
*/
#if defined(EEPROM_SPI_MB85RS64V)
# define EXTERNAL_EEPROM_BYTE_COUNT 8192
# define EXTERNAL_EEPROM_PAGE_SIZE 64 // it's FRAM, so it doesn't actually matter, this just sets the RAM buffer
# define EXTERNAL_EEPROM_ADDRESS_SIZE 2
#endif
/*
The slave select pin of the EEPROM.
This needs to be a normal GPIO pin_t value, such as A7.

View file

@ -26,6 +26,7 @@
#define MATRIX_ROW_PINS { A8, A1, A2, B1, A7 }
// FRAM configuration
#define EEPROM_SPI_MB85RS64V
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A0
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 4 // 48MHz / 4 = 12MHz; max supported by MB85R64 is 20MHz

View file

@ -19,5 +19,3 @@
// 20m timeout (20m * 60s * 1000mil)
// #define RGB_MATRIX_TIMEOUT 1200000
#define RGB_DISABLE_WHEN_USB_SUSPENDED
#define STM32_ONBOARD_EEPROM_SIZE 2048

View file

@ -24,5 +24,3 @@
// 224B per layer right now
#define DYNAMIC_KEYMAP_LAYER_COUNT 8
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047
#define STM32_ONBOARD_EEPROM_SIZE 2048

View file

@ -19,6 +19,3 @@
// 20m timeout (20m * 60s * 1000mil)
// #define RGB_MATRIX_TIMEOUT 1200000
#define RGB_DISABLE_WHEN_USB_SUSPENDED
#define STM32_ONBOARD_EEPROM_SIZE 2048

View file

@ -25,6 +25,3 @@
// 224B per layer right now
#define DYNAMIC_KEYMAP_LAYER_COUNT 8
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047
#define STM32_ONBOARD_EEPROM_SIZE 2048

View file

@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
// Buggy, currently disabled
/* #define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000
#define EXTERNAL_EEPROM_I2C_ADDRESS(loc) (EXTERNAL_EEPROM_I2C_BASE_ADDRESS | ((((loc) >> 8) & 0x07) << 1))
#define EXTERNAL_EEPROM_BYTE_COUNT 2048
#define EXTERNAL_EEPROM_PAGE_SIZE 16
#define EXTERNAL_EEPROM_ADDRESS_SIZE 1
#define EXTERNAL_EEPROM_WRITE_TIME 5 */
#define RGBLIGHT_LAYERS_RETAIN_VAL
#define OLED_DISPLAY_WIDTH 128

View file

@ -22,7 +22,6 @@
#define RGB_CURR_3000mA_OK_PIN C5
// EEPROM configuration
#define EEPROM_SPI_MB85RS64V
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B5
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // (160MHz/8) => 20MHz
#define EXTERNAL_EEPROM_BYTE_COUNT 8192
#define EXTERNAL_EEPROM_PAGE_SIZE 64 // it's FRAM, so it doesn't actually matter, this just sets the RAM buffer size

View file

@ -25,10 +25,9 @@
#define RGB_CURR_3000mA_OK_PIN C4
// EEPROM configuration
#define EEPROM_SPI_MB85RS64V
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B5
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // (160MHz/8) => 20MHz
#define EXTERNAL_EEPROM_BYTE_COUNT 8192
#define EXTERNAL_EEPROM_PAGE_SIZE 64 // it's FRAM, so it doesn't actually matter, this just sets the RAM buffer size
// External flash config
#define EXTERNAL_FLASH_SPI_MODE 3

View file

@ -8,8 +8,7 @@
// #define MATRIX_COLS 8 // actually defined in info.json: 8 bits per register
// EEPROM configuration
#define EXTERNAL_EEPROM_BYTE_COUNT 8192
#define EXTERNAL_EEPROM_PAGE_SIZE 64 // it's FRAM, so it doesn't actually matter, this just sets the RAM buffer
#define EEPROM_SPI_MB85RS64V
// RGB configuration
#define RGB_MATRIX_LED_COUNT 40

View file

@ -19,11 +19,7 @@
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_16_9
/* eeprom i2c driver config */
#define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000
#define EXTERNAL_EEPROM_BYTE_COUNT 4096
#define EXTERNAL_EEPROM_PAGE_SIZE 32
#define EXTERNAL_EEPROM_WRITE_TIME 10
//#define EEPROM_I2C_24LC32
#define EEPROM_I2C_24LC32A
/* OLED config */
#define OLED_UPDATE_INTERVAL 100

View file

@ -35,6 +35,3 @@
// I2C EEPROM
#define EEPROM_I2C_CAT24C512
// Dynamic EEPROM
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 65535

View file

@ -36,9 +36,6 @@
// I2C EEPROM
#define EEPROM_I2C_24LC64
// More EEPROM for layers
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191
// RGB Matrix defines
#define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND

View file

@ -30,14 +30,7 @@
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
// EEPROM config
// 24LC32
#define EXTERNAL_EEPROM_BYTE_COUNT 4096
#define EXTERNAL_EEPROM_PAGE_SIZE 32
#define EXTERNAL_EEPROM_ADDRESS_SIZE 2
#define EXTERNAL_EEPROM_WRITE_TIME 5
// More EEPROM for layers
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095
#define EEPROM_I2C_24LC32A
// Hardware Defines
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE

View file

@ -30,14 +30,7 @@
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
// EEPROM config
// 24LC32
#define EXTERNAL_EEPROM_BYTE_COUNT 4096
#define EXTERNAL_EEPROM_PAGE_SIZE 32
#define EXTERNAL_EEPROM_ADDRESS_SIZE 2
#define EXTERNAL_EEPROM_WRITE_TIME 5
// More EEPROM for layers
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095
#define EEPROM_I2C_24LC32A
// Hardware Defines
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE

View file

@ -36,9 +36,6 @@
// I2C EEPROM
#define EEPROM_I2C_24LC64
// More EEPROM for layers
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191
/* RGB Matrix */
#define RGB_MATRIX_LED_COUNT 28
#define NOP_FUDGE 0.4

View file

@ -35,10 +35,4 @@
#define I2C1_TIMINGR_SCLL 9U
// I2C EEPROM
// 24LC64
#define EEPROM_I2C_24LC64
// Dynamic EEPROM
// Something sensible or else VIA may crash
// Users may enable more if they wish
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095

View file

@ -34,6 +34,3 @@
// I2C EEPROM
#define EEPROM_I2C_24LC64
// More EEPROM for layers
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191

View file

@ -34,9 +34,6 @@
// I2C EEPROM
#define EEPROM_I2C_24LC64
// More EEPROM for layers
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191
// RGBLIGHT
#define RGBLIGHT_LAYERS
#define WS2812_EXTERNAL_PULLUP

View file

@ -24,11 +24,9 @@
// FRAM configuration
#ifndef EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN
# define EEPROM_SPI_MB85RS64V
# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOA, 0)
# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz
# define EXTERNAL_EEPROM_BYTE_COUNT 8192
# define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip
# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191
#endif
// External flash configuration