[Core] Introduce pointing device specific debug messages (#17663)

This commit is contained in:
Stefan Kerkmann 2022-08-29 19:16:49 +02:00 committed by GitHub
parent d910e8df77
commit e99ec28f5f
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
9 changed files with 50 additions and 59 deletions

View file

@ -487,3 +487,13 @@ report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, re
return pointing_device_combine_reports(left_report, right_report);
}
```
# Troubleshooting
If you are having issues with pointing device drivers debug messages can be enabled that will give you insights in the inner workings. To enable these add to your keyboards `config.h` file:
```c
#define POINTING_DEVICE_DEBUG
```
?> The messages will be printed out to the `CONSOLE` output. For additional information, refer to [Debugging/Troubleshooting QMK](faq_debug.md).

View file

@ -4,8 +4,6 @@
// refer to documentation: Gen2 and Gen3 (Pinnacle ASIC) at https://www.cirque.com/documentation
#include "cirque_pinnacle.h"
#include "print.h"
#include "debug.h"
#include "wait.h"
#include "timer.h"
@ -27,12 +25,6 @@ void cirque_pinnacle_enable_feed(bool feedEnable);
void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count);
void RAP_Write(uint8_t address, uint8_t data);
#ifdef CONSOLE_ENABLE
void print_byte(uint8_t byte) {
xprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0'));
}
#endif
#if CIRQUE_PINNACLE_POSITION_MODE
/* Logical Scaling Functions */
// Clips raw coordinates to "reachable" window of sensor

View file

@ -5,6 +5,7 @@
#include "cirque_pinnacle_regdefs.h"
#include <stdint.h>
#include <stdbool.h>
#include "pointing_device_internal.h"
#ifndef CIRQUE_PINNACLE_TIMEOUT
# define CIRQUE_PINNACLE_TIMEOUT 20 // I2C timeout in milliseconds

View file

@ -1,8 +1,6 @@
// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license
#include "cirque_pinnacle.h"
#include "i2c_master.h"
#include "print.h"
#include "debug.h"
#include "stdio.h"
// Masks for Cirque Register Access Protocol (RAP)
@ -18,9 +16,7 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) {
if (touchpad_init) {
i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, NULL, 0, CIRQUE_PINNACLE_TIMEOUT);
if (i2c_readReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, data, count, CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) {
#ifdef CONSOLE_ENABLE
dprintf("error cirque_pinnacle i2c_readReg\n");
#endif
pd_dprintf("error cirque_pinnacle i2c_readReg\n");
touchpad_init = false;
}
i2c_stop();
@ -33,9 +29,7 @@ void RAP_Write(uint8_t address, uint8_t data) {
if (touchpad_init) {
if (i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, &data, sizeof(data), CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) {
#ifdef CONSOLE_ENABLE
dprintf("error cirque_pinnacle i2c_writeReg\n");
#endif
pd_dprintf("error cirque_pinnacle i2c_writeReg\n");
touchpad_init = false;
}
i2c_stop();

View file

@ -1,8 +1,6 @@
// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license
#include "cirque_pinnacle.h"
#include "spi_master.h"
#include "print.h"
#include "debug.h"
// Masks for Cirque Register Access Protocol (RAP)
#define WRITE_MASK 0x80
@ -24,9 +22,7 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) {
data[i] = spi_write(FILLER_BYTE); // write filler, receive data on the third filler send
}
} else {
#ifdef CONSOLE_ENABLE
dprintf("error cirque_pinnacle spi_start read\n");
#endif
pd_dprintf("error cirque_pinnacle spi_start read\n");
touchpad_init = false;
}
spi_stop();
@ -42,9 +38,7 @@ void RAP_Write(uint8_t address, uint8_t data) {
spi_write(cmdByte);
spi_write(data);
} else {
#ifdef CONSOLE_ENABLE
dprintf("error cirque_pinnacle spi_start write\n");
#endif
pd_dprintf("error cirque_pinnacle spi_start write\n");
touchpad_init = false;
}
spi_stop();

View file

@ -14,10 +14,10 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "pointing_device_internal.h"
#include "pimoroni_trackball.h"
#include "i2c_master.h"
#include "print.h"
#include "debug.h"
#include "timer.h"
// clang-format off
@ -58,20 +58,17 @@ void pimoroni_trackball_set_rgbw(uint8_t r, uint8_t g, uint8_t b, uint8_t w) {
uint8_t data[4] = {r, g, b, w};
__attribute__((unused)) i2c_status_t status = i2c_writeReg(PIMORONI_TRACKBALL_ADDRESS << 1, PIMORONI_TRACKBALL_REG_LED_RED, data, sizeof(data), PIMORONI_TRACKBALL_TIMEOUT);
#ifdef CONSOLE_ENABLE
if (debug_mouse) dprintf("Trackball RGBW i2c_status_t: %d\n", status);
#endif
pd_dprintf("Trackball RGBW i2c_status_t: %d\n", status);
}
i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data) {
i2c_status_t status = i2c_readReg(PIMORONI_TRACKBALL_ADDRESS << 1, PIMORONI_TRACKBALL_REG_LEFT, (uint8_t*)data, sizeof(*data), PIMORONI_TRACKBALL_TIMEOUT);
#ifdef CONSOLE_ENABLE
if (debug_mouse) {
static uint16_t d_timer;
if (timer_elapsed(d_timer) > PIMORONI_TRACKBALL_DEBUG_INTERVAL) {
dprintf("Trackball READ i2c_status_t: %d L: %d R: %d Up: %d D: %d SW: %d\n", status, data->left, data->right, data->up, data->down, data->click);
d_timer = timer_read();
}
#ifdef POINTING_DEVICE_DEBUG
static uint16_t d_timer;
if (timer_elapsed(d_timer) > PIMORONI_TRACKBALL_DEBUG_INTERVAL) {
pd_dprintf("Trackball READ i2c_status_t: %d L: %d R: %d Up: %d D: %d SW: %d\n", status, data->left, data->right, data->up, data->down, data->click);
d_timer = timer_read();
}
#endif

View file

@ -7,9 +7,8 @@
// Copyright 2020 Ploopy Corporation
// SPDX-License-Identifier: GPL-2.0-or-later
#include "debug.h"
#include "pointing_device_internal.h"
#include "pmw33xx_common.h"
#include "print.h"
#include "string.h"
#include "wait.h"
#include "spi_master.h"
@ -154,7 +153,7 @@ bool pmw33xx_init(uint8_t sensor) {
pmw33xx_read(sensor, REG_Delta_Y_H);
if (!pmw33xx_upload_firmware(sensor)) {
dprintf("PMW33XX (%d): firmware upload failed!\n", sensor);
pd_dprintf("PMW33XX (%d): firmware upload failed!\n", sensor);
return false;
}
@ -170,7 +169,7 @@ bool pmw33xx_init(uint8_t sensor) {
pmw33xx_write(sensor, REG_Lift_Config, PMW33XX_LIFTOFF_DISTANCE);
if (!pmw33xx_check_signature(sensor)) {
dprintf("PMW33XX (%d): firmware signature verification failed!\n", sensor);
pd_dprintf("PMW33XX (%d): firmware signature verification failed!\n", sensor);
return false;
}
@ -185,7 +184,7 @@ pmw33xx_report_t pmw33xx_read_burst(uint8_t sensor) {
}
if (!in_burst[sensor]) {
dprintf("PMW33XX (%d): burst\n", sensor);
pd_dprintf("PMW33XX (%d): burst\n", sensor);
if (!pmw33xx_write(sensor, REG_Motion_Burst, 0x00)) {
return report;
}
@ -208,9 +207,7 @@ pmw33xx_report_t pmw33xx_read_burst(uint8_t sensor) {
spi_stop();
if (debug_config.mouse) {
dprintf("PMW33XX (%d): motion: 0x%x dx: %i dy: %i\n", sensor, report.motion.w, report.delta_x, report.delta_y);
}
pd_dprintf("PMW33XX (%d): motion: 0x%x dx: %i dy: %i\n", sensor, report.motion.w, report.delta_x, report.delta_y);
report.delta_x *= -1;
report.delta_y *= -1;

View file

@ -17,6 +17,7 @@
*/
#include "pointing_device.h"
#include "pointing_device_internal.h"
#include "debug.h"
#include "wait.h"
#include "timer.h"
@ -32,10 +33,7 @@ report_mouse_t adns5050_get_report(report_mouse_t mouse_report) {
report_adns5050_t data = adns5050_read_burst();
if (data.dx != 0 || data.dy != 0) {
# ifdef CONSOLE_ENABLE
if (debug_mouse) dprintf("Raw ] X: %d, Y: %d\n", data.dx, data.dy);
# endif
pd_dprintf("Raw ] X: %d, Y: %d\n", data.dx, data.dy);
mouse_report.x = (mouse_xy_report_t)data.dx;
mouse_report.y = (mouse_xy_report_t)data.dy;
}
@ -76,9 +74,7 @@ const pointing_device_driver_t pointing_device_driver = {
report_mouse_t analog_joystick_get_report(report_mouse_t mouse_report) {
report_analog_joystick_t data = analog_joystick_read();
# ifdef CONSOLE_ENABLE
if (debug_mouse) dprintf("Raw ] X: %d, Y: %d\n", data.x, data.y);
# endif
pd_dprintf("Raw ] X: %d, Y: %d\n", data.x, data.y);
mouse_report.x = data.x;
mouse_report.y = data.y;
@ -140,11 +136,9 @@ report_mouse_t cirque_pinnacle_get_report(report_mouse_t mouse_report) {
return mouse_report;
}
# if CONSOLE_ENABLE
if (debug_mouse && touchData.touchDown) {
dprintf("cirque_pinnacle touchData x=%4d y=%4d z=%2d\n", touchData.xValue, touchData.yValue, touchData.zValue);
if (touchData.touchDown) {
pd_dprintf("cirque_pinnacle touchData x=%4d y=%4d z=%2d\n", touchData.xValue, touchData.yValue, touchData.zValue);
}
# endif
// Scale coordinates to arbitrary X, Y resolution
cirque_pinnacle_scale_data(&touchData, cirque_pinnacle_get_scale(), cirque_pinnacle_get_scale());
@ -227,9 +221,7 @@ const pointing_device_driver_t pointing_device_driver = {
report_mouse_t paw3204_get_report(report_mouse_t mouse_report) {
report_paw3204_t data = paw3204_read();
if (data.isMotion) {
# ifdef CONSOLE_ENABLE
dprintf("Raw ] X: %d, Y: %d\n", data.x, data.y);
# endif
pd_dprintf("Raw ] X: %d, Y: %d\n", data.x, data.y);
mouse_report.x = data.x;
mouse_report.y = data.y;
@ -329,7 +321,7 @@ report_mouse_t pmw33xx_get_report(report_mouse_t mouse_report) {
if (!in_motion) {
in_motion = true;
dprintf("PWM3360 (0): starting motion\n");
pd_dprintf("PWM3360 (0): starting motion\n");
}
mouse_report.x = CONSTRAIN_HID_XY(report.delta_x);

View file

@ -0,0 +1,14 @@
// Copyright 2022 Stefan Kerkmann
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#ifdef POINTING_DEVICE_DEBUG
# include "debug.h"
# include "print.h"
# define pd_dprintf(...) dprintf(__VA_ARGS__)
#else
# define pd_dprintf(...) \
do { \
} while (0)
#endif