Commit graph

173 commits

Author SHA1 Message Date
Nick Brassel
172e6a7030
Extensible split data sync (#11930)
* Extensible split data sync capability through transactions.

- Split common transport has been split up between the transport layer
  and data layer.
- Split "transactions" model used, with convergence between I2C and
  serial data definitions.
- Slave matrix "generation count" is used to determine if the full slave
  matrix needs to be retrieved.
- Encoders get the same "generation count" treatment.
- All other blocks of data are synchronised when a change is detected.
- All transmissions have a globally-configurable deadline before a
  transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms).
- Added atomicity for all core-synced data, preventing partial updates
- Added retries to AVR i2c_master's i2c_start, to minimise the number of
  failed transactions when interrupts are disabled on the slave due to
  atomicity checks.
- Some keyboards have had slight modifications made in order to ensure
  that they still build due to firmware size restrictions.

* Fixup LED_MATRIX compile.

* Parameterise ERROR_DISCONNECT_COUNT.
2021-06-18 09:10:06 +10:00
Stefan Kerkmann
ef92c9ee2c
Add CRC8 calculation subsystem to quantum (#12641)
* Intended usage is data validation in split transport code.
* Default space efficient algorithm.
* Opt-in fast table based algorithmn with #define CRC8_USE_TABLE switch.
* Define switches for size and speed optimized versions, the default is size
  optimized by using uint_least8_t as datatype for calculations.
  * #define CRC8_OPTIMIZE_SPEED uses uint_fast8_t as datatype for
    calculations, this only affects 32-bit Archs like ARM and RISC-V.
* Placeholder crc_init() function for hardware backed crc calculation,
  not implemented yet.
2021-06-18 00:09:43 +01:00
Ryan
b2fdd48744
Add ST7565 LCD driver (#13089)
Co-authored-by: Joakim Tufvegren <jocke@barbanet.com>
2021-06-10 17:16:09 +10:00
Gigahawk
32b2ac0a80
GMMK Pro RGB Support (#13147)
* Enable SPI1 for GMMK pro

* Setup initial boilerplate for new LED driver

* RGB matrix minimally functional

* Map full LED matrix

* Return keymap to default

* Fix printscreen LED mapping

* Reduce max brightness

* Default values for AW20216

* Add documentation for AW20216

* Disable console and warnings

* Run cformat

* Update drivers/awinic/aw20216.h

Co-authored-by: Drashna Jaelre <drashna@live.com>

* make aw struct match issi struct

Co-authored-by: Drashna Jaelre <drashna@live.com>

* add led location defines

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Use led pin definitions in keyboard.c

* Add driver indices to led map

* Fix elif typo

* Run cformat

* Update docs

* Fix typo in docs

* Document global brightness limits

Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-10 11:40:25 +10:00
Drashna Jaelre
330fe1d1cc
Do not hard set config in CPTC files (#11864) 2021-05-22 19:43:54 -07:00
James Young
a8d64c8b89
Change BOOTMAGIC_ENABLE=yes to use Bootmagic Lite (#12172) 2021-04-12 21:18:52 +02:00
Ryan
40c314fe5c
LED Matrix: Implement CIE1931 curve (#12417) 2021-04-07 20:06:11 +10:00
Ryan
ed28795651
LED Matrix: Additional common_features.mk tweaks (#12187) 2021-03-20 14:52:33 +11:00
Ryan
9155b59e1a
LED Matrix: decouple from Backlight (#12054) 2021-03-08 16:55:00 +11:00
QMK Bot
0efafdd408 Merge remote-tracking branch 'origin/master' into develop 2021-02-28 20:12:15 +00:00
Ryan
1a7f2c8f45
Extract sendstring into its own compilation unit (#12060)
* Extract sendstring into its own compilation unit

* License headers?

* Put this include in the header
2021-03-01 07:11:39 +11:00
Joel Challis
a3cbc8a004
Overhaul bootmagic logic to have single entrypoint (#8532)
* Relocate bootmagic logic to have single entrypoint

* Align init of layer state
2021-02-28 15:50:15 +00:00
Joshua Diamond
0b63fb5e81 Merge branch 'master' into develop 2021-02-14 20:26:22 -05:00
Ryan
9ee1282019
LED Matrix: rename LED_DRIVER_LED_COUNT to DRIVER_LED_TOTAL (#11858) 2021-02-15 11:55:13 +11:00
Drashna Jaelre
c80e5f9f88
Audio system overhaul (#11820)
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback

changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms
this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard)

f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both
  -> only the changes on audio_arm_.*, the keyboard related parts are split off to a separate commit
bfe468ef1 start morphing wavetable
474d100b5 refined a bit
208bee10f play_notes working
3e6478b0b start in-place documentation of dac settings
3e1826a33 fixed blip (rounding error), other waves, added key selection (left/right)
73853d651 5 voices at 44.1khz
dfb401b95 limit voices to working number
9632b3379 configuration for the ez
6241f3f3b notes working in a new way

* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback

changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms

this commit splits off the plank example keymap from commit
    f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both

* refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac

* refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation

pulls three copies of the same code into one function
which should improve readability and maintainability :-)

* refactoring: move common code of arm and avr implementation into a separate/new file

* refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs

* refactoring: audio_avr_pwm - replacing function defines with plain register defines

aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing

* add audio-arm-pwm

since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx)
this code works on a "BluePill" clone, with an STM32F103C8B

* clang-format changes on quantum/audio/* only

* audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths

* audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup)

* refactoring: remove unused file from/for atmel-avr chips

* refactoring: remove unused (avr) wavetable file

* audio_arm_dac: adapt dac_end callback to changed chibios DAC api

the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object.
this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count

* audio-arm-dac: show a compile-warning on undefined audio-pins

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* audio_arm_dac: switch from exemplary wavetable generation to sine only

sine+triangle+squrare is exemplary, and not realy fit for "production" use
'stairs' are usefull for debugging (hardware, with an oscilloscope)

* audio_arm_dac: enable output buffers in the STM32

to drive external loads without any additional ciruitry - external opamps and such

* audio: prevent out-of-bounds array access

* audio_arm_dac: add output-frequency correcting factor

* audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition

and do some code-cleanup, refine documentation, ...

* audio_arm_pwm: increase pwm frequency for "higher fidelity"

on the previous .frequency=100000 higher frequency musical notes came out wrong
(frequency measured on a Tektronix TDS2014B)
note | freq | arm-pwm
C2 | 65.4 | 65.491
C5 | 523.25 | 523.93
C6 | 1046.5 | 1053.38
C7 | 2093 | 2129
C8 | 4186 | 4350.91

with .frequency = 500000
C8 | 4186 | 4204.6

* audio refactoring: remove unused variables

* audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second

* audio: allow feature selection in rules.mk

so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up)
or select the "pin alternate" pwm mode, for example on STM32F103

* audio-refactoring: move codeblocks in audio.[ch] into more coherent groups

and add some inline documentation

* audio-refactoring: cleanup and streamline common code between audio_arm_[dac|pwm]

untangeling the relation between audio.c and the two drivers
and adding more documenting comments :-)

* audio_avr_pwm: getting it back into working condition, and cleanup+refactor

* audio-refactoring: documentation and typo fixes

Co-Authored-By: Nick Brassel <nick@tzarc.org>

* audio-refactoring: cleanup defines, inludes and remove debug-prints

* audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range

to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently
also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged'

* audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers

* audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable

* audio_chibios_dac: math.h has fmod for this

* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback

update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface

* audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines

have the user select a pin by configuration in rules.mk instead of a define in config.h
has the advantage of beeing in a common form/pattern across all audio-driver implementations

* audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines

* audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played

* audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG

through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency...

* audio-refactoring: get 'play_note' working again

with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue

* audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment)

* audio-refactoring: moore documentation

and some cleanup

* audio-avr-pwm: no fallback on unset AUDIO_PIN

this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy

* audio-refactoring: untangling terminology: voice->tone

the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet)

* audio-pwm: allow freq=0 aka a pause/rest in a SONG

continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion)

* audio-refactoring: audio_advance_note -> audio_advance_state

since it does not only affect 'one note', but the internally kept state as a whole

* audio-refactoring: untangling terminology: polyphony

the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time

* audio-chibios-dac: add zero-crossing feature

have tones only change/stop when the waveform approaches zero - to avoid audible clicks
note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too

* audio-refactoring: feature: time-multiplexing of tones on a single output channel

this feature was in the original avr-pwm implementation misnomed as "polyphony"
with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) )

* audio-avr-pwm: get music-mode working (again) on AVRs

with both pwm channels, or either one of the two :-)
play_notes worked already - but music_mode uses play_note

* audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE

since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note

* audio-arm-dac: per define selectable sample-luts

plus generation script in ./util

* audio-refactoring: heh, avr has a MIN...

* audio-refactoring: add basic dac audio-driver based on the current/master implementation

whereas current=d96380e65496912e0f68e6531565f4b45efd1623
which is the state of things before this whole audio-refactoring branch

boiled down to interface with the refactored audio system = removing all
redundant state-managing and frequency calculation

* audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER

* audio-arm-pwm: split the software/hardware implementations into separate files

which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained

* audio-refactoring: update documentation

* audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic

* audio-arm-dac: dac_additive: stop the hardware when the last sample completed

the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes

* audio-refactoring: make function-namespace consistent

- all (public) audio functions start with audio_
- also refactoring play*_notes/tones to play*_melody, to visually distance it a bit from play*_tone/_note

* audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_

* audio-arm-dac: update (inline) documentation regarding MAX for sample values

* audio-chibios-dac: remove zero-crossing feature

didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway

* audio-arm-dac: dac_basic: respect the configured sample-rate

* audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle

like it already does in the avr implementation

* audio-refactoring: get VIBRATO working (again)

with all drivers (verified with chibios_[dac|pwm])

* audio-arm-dac: zero-crossing feature (Mk II)

wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones

* audio-refactoring: re-add note-resting -> introduce short_rest inbetween

- introduce a short pause/rest between two notes of the same frequency, to separate them audibly
- also updating the refactoring comments

* audio-refactoring: cleanup refactoring remnants

remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system

also updates the TODOS

* audio-refactoring: reserve negative numbers as unitialized frequencies

to allow the valid tone/frequency f=0Hz == rest/pause

* audio-refactoring: FIX: first note of melody was missing

the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone
and some code-indentations/cleanup of related parts

* audio-arm-dac: fix hardware init-click

due to wron .init= value

* audio-refactoring: new conveniance function: audio_play_click

which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features

* audio-refactoring: clang-format on quantum/audio/*

* audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c

* audio-refactoring: use milliseconds instead of seconds for 'click' parameters

clicks are supposed to be short, seconds make little sense

* audio-refactoring: use timer ticks instead of counters

local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature
decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway

* audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks

* audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c

also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines

* audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision

since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace

* audio.c: stop notes after new ones have been started

avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks

* audio.c: bugfix: actually play a pause

instead of just idling/stopping which lead the pwm drivers to stop entirely...

* audio-arm-pwm: pwm-software: add inverted output

new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT

* audio-arm-dac: basic: handle piezo configured&wired to both audio pins

* audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring

* audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps

avoids running into issues when the uint32 of the timer overflows

* audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST

* audio_arm_dac: basic: add missing bracket

* audio.c: fix delta calculation

was in the wrong place, needs to use the 'last_timestamp' before it was reset

* audio-refactoring: buildfix: wrong legacy macro for set_timbre

* audio.c: 16bit timerstamps suffice

* audio-refactoring: separate includes for AVR and chibios

* audio-refactoring: timbre: use uint8 instead of float

* audio-refactoring: duration: use uint16 for internal per-tone/note state

* audio-refactoring: tonemultiplexing: use uint16 instead of float

* audio-arm-dac: additive: set second pin output-low

used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE

* audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h

to be consistent with how other features are handled in QMK

* audio-refactoring: buildfix: wrong legacy macro for set_tempo

* audio-arm-dac: additive: set second pin output-low -- FIXUP

* audio.c: do duration<>ms conversion in uint instead of float

on AVR, to save a couple of bytes in the firmware size

* audio-refactoring: cleanup eeprom defines/usage

for ARM, avr is handled automagically through the avr libc and common_features.mk

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* audio.h: throw an error if OFF is larger than MAX

* audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop

to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW

one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE
show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise.
the extra pusles probably matter little, since this is no high-fidelity sound generation :P

* audio-arm-dac: additive: move zero-crossing code out of dac_value_generate

which is/should be user-overridable == simple, and doing one thing: providing sample values
state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback

* audio-arm-dac: dac-additive: zero-crossing: ramping up or down

after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally
same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output

* audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing

fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause

* audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF

1/2 MAX was probably exemplary, can't think of  a setup where that would make sense :-P

* audio-arm-dac: update synth_sample/_wavetable for new pin-defines

* audio-arm-dac:  default for AUDIO_DAC_VALUE_OFF

turned out that zero or max are bad default choices:
when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late

* audio-arm-dac: additive: use DAC for negative pin

instead of PAL, which only allows the pin to be configured as output; LOW or HIGH

* audio-arm-dac: more compile-time configuration checks

* audio-refactoring: typo fixed

* audio-refactoring: clang-format on quantum/audio/*

* audio-avr-pwm: add defines for B-pin as primary/only speaker

also updates documentation.

* audio-refactoring: update documentation with proton-c config.h example

* audio-refactoring: move glissando (TODO) to voices.c

refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c

still needs some work though, as it is now the calculation *should* work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input?

* audio-refactoring: cleanup: one round of aspell -c

* audio-avr-pwm: back to AUDIO_PIN

since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5
so there is no need to deal with separate defines like AUDIO_PIN_B5

* audio-refactoring: add technical documentation audio_driver.md

which moves some in-code documentation there

* audio-arm-dac: move AUDIO_PIN checks into c-code

instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler)

* audio-arm-dac: compile-fix: set AUDIO_PIN if unset

workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error"

* audio-refactoring: document tone-multiplexing feature

* audio-refactoring: Apply suggestions from documentation review

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* audio-refactoring: Update docs/audio_driver.md

* audio-refactoring: docs: fix markdown newlines

Terminating a line in Markdown with <space>-<space>-<linebreak> creates an HTML single-line break (<br>).

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* audio-arm-dac: additive: fix AUDIO_PIN_ALT handling

* audio-arm-pwm: align define naming with other drivers

Co-authored-by: Joel Challis <git@zvecr.com>

* audio-refactoring: set detault tempo to 120

and add documentation for the override

* audio-refactoring: update backlight define checks to new AUDIO_PIN names

* audio-refactoring: reworking PWM related defines

to be more consistent with other QMK code

Co-authored-by: Joel Challis <git@zvecr.com>

* audio-arm: have the state-update-timer user configurable

defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c)
stm32f1 might need to set this to GPTD4, since 6 and 8 are not available

* audio-refactoring: PLAY_NOTE_ARRAY was already removed in master

* Add prototype for startup

* Update chibiOS dac basic to disable pins on stop

* Add defaults for Proton C

* avoid hanging audio if note is completely missed

* Don't redefine pins if they're already defined

* Define A4 and A5 for CTPC support

* Add license headers to keymap files

* Remove figlet? comments

* Add DAC config to audio driver docs

* Apply suggestions from code review

Co-authored-by: Jack Humbert <jack.humb@gmail.com>

* Add license header to py files

* correct license header

* Add JohSchneider's name to modified files

AKA credit where credit's due

* Set executable permission and change interpeter

* Add 'wave' to pip requirements

* Improve documentation

* Add some settings I missed

* Strip AUDIO_DRIVER to parse the name correctly

* fix depreciated

* Update util/audio_generate_dac_lut.py

Co-authored-by: Jack Humbert <jack.humb@gmail.com>

* Fix type in clueboard config

* Apply suggestions from tzarc

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Johannes <you@example.com>
Co-authored-by: JohSchneider <JohSchneider@googlemail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joshua Diamond <josh@windowoffire.com>
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
2021-02-15 09:40:38 +11:00
Nick Brassel
f53e41ac81
Add support for analog USBPD on STM32G4xx. (#11824)
* Add support for analog USBPD on STM32G4xx.

* Split up to a list of driver types, allow for custom.
2021-02-15 08:56:13 +11:00
Drashna Jaelre
7161d65070
Remove FAUXCLICKY feature (deprecated) (#11829) 2021-02-09 09:49:05 -08:00
QMK Bot
3a98bd75c8 Merge remote-tracking branch 'origin/master' into develop 2021-02-07 23:16:47 +00:00
Joel Challis
99bffc2a21
Migrate some tmk_core files to quantum (#11791)
* Migrate some tmk_core files to quantum

* Fix build errors
2021-02-07 23:16:15 +00:00
Joel Challis
0288142769
Migrate mousekey to quantum (#11804) 2021-02-07 13:56:08 +00:00
Drashna Jaelre
9591e992cc
Move transport.c to QUANTUM_LIB_SRC (#11751) 2021-02-01 20:12:52 +11:00
Dasky
d92ffd1157
Adds AT90USB162 support (#11570)
* at90usb162 support

* fix missing bracket

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-29 19:53:56 -08:00
Nick Brassel
d65db68f9f Merge remote-tracking branch 'upstream/master' into develop 2021-01-28 10:52:59 +11:00
Takeshi ISHII
c27f16158d
add get_matrix_scan_rate() to tmk_core/common/keyboard.c (#11489) 2021-01-28 04:34:50 +11:00
Aldehir Rojas
4f2f21dc05
Rewrite APA102 support (#10894)
* Rewrite APA102 support

The APA102 source was broken by commit 16a15c1cfc as it did not include the
quantum header. This commit addresses that, as well as other issues with
transferring bytes over the SPI interface, i.e. it was not setting the
clock pin back to low after sending a bit.

The deviation when sending the end frame is kept, but updated to the
latest from the referenced project.

Finally, these changes expose the global LED brightness parameter
of the APA102. Brightness values are configurable through
`APA102_DEFAULT_BRIGHTNESS` and `APA102_MAX_BRIGHTNESS`.

* Fix typo in led brightness extern

* Move driver out of AVR directory and add delay for ARM

* Experimental APA102 support on AVR and ARM

Co-authored-by: Alde Rojas <hello@alde.io>

* Refactor apa102_send_byte() calls to a loop

* Implement io_wait function for ARM

* Move APA102 drivers to own directory, fix copyright notice

* Add APA102 keymap to handwired/onekey

* Simplify RGBLIGHT_ENABLE/DRIVER option handling

Co-authored-by: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com>
2020-12-30 00:28:49 +00:00
James Young
c66df16644
2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change
2020-11-28 12:02:18 -08:00
Joel Challis
1ff5ee255f
Indicator LEDs as config (#10816)
* First pass

* Add config options to docs

* Update some wording

* Slight tidy up of backlight caps logic

* Init pin to correct state

* Move init location

* Reverse default state
2020-11-08 22:31:16 +00:00
Ryan
2b9b267e8e
Fix RGB matrix for ATmegaxxU2 (#10723) 2020-10-23 12:21:56 +11:00
Adrian
120c42255b
Added EEPROM emulation for STM32F042x6 series processors (#10685)
* Added STM32F042x6 support for EEPROM emulation

* Default to lower stack size on STM32F042

* Moved stack setting

* Re-moved stack definition

* Removed unnecessary check
2020-10-22 21:05:01 +11:00
Purdea Andrei
f7ccbfcea8
quantum/debounce: rename debouncing algorithms (#9564)
* quantum/debounce: rename debouncing algorithms according to Issue 8763

This is the second attempt at implementation, with no ts_ and cy_ prefixes, since those will be implemented with macros.

* Debouncing documentation: Refactor, add some generic info, and merge into a single document
2020-09-06 13:13:49 -07:00
Zach White
bdd8d2679b Allow joysticks to be used without analog pins (#10169)
* Allow joysticks to be used without analog pins

* change how analog/digital joysticks are specified
2020-08-29 14:30:02 -07:00
Nick Brassel
1de39e5632 Define STM32_DMA_REQUIRED when using DMA-based WS2812 driver on STM32. (#10127) 2020-08-29 14:30:02 -07:00
Joel Challis
21a00b7f02 ARM backlight - timer implementation (#8291)
* Add GPT timer based backlight driver

* Update to tim15 to avoid conflict with audio

* Update quantum/backlight/backlight_timer.c
2020-08-29 14:30:02 -07:00
a-chol
d4be07dad3 Hid joystick interface (#4226)
* add support for hid gamepad interface
add documentation for HID joystick
Add joystick_task to read analog axes values even when no key is pressed or release. update doc
Update docs/feature_joystick.md
Manage pin setup and read to maintain matrix scan after analog read

* Incorporates patches and changes to HID reporting

There are some patches provided by @a-chol incorporated on this commit,
and also some changes I made to the HID Report structure.

The most interesting is the one dealing with number of buttons: Linux
doesn't seem to care, but Windows requires the HID structure to be byte
aligned (that's in the spec). So if one declares 8/16/32... buttons they
should not have any issues, but this is what happens when you have 9
buttons:

```
 bits |0|1|2|3|4|5|6|7|
      |*|*|*|*|*|*|*|*| axis 0 (report size 8)
      |*|*|*|*|*|*|*|*| ...
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*| axis 6
      |*|*|*|*|*|*|*|*| first 8 buttons (report size 1)
      |*| | | | | | | | last of 9 buttons, not aligned
```

So for that I added a conditonal that will add a number of reports with
size 1 to make sure it aligns to the next multiple of 8. Those reports
send dummy inputs that don't do anything aside from aligning the data.

Tested on Linux, Windows 10 and Street Fighter (where the joystick is
recognized as direct-input)

* Add save and restore of each pin used in reading joystick (AVR).
Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc
instead of an output pin from the MCU.

Fix joystick report id

Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes)

Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis.

Documentation fixes

* Fix port addressing for joystick analog read

* The other required set of changes
As per the PR, the changes still holding it up.
Add onekey for testing.
Fix ARM builds.
Fix device descriptor when either axes or buttons is zero.
Add compile-time check for at least one axis or button.
Move definition to try to fix conflict.
PR review comments.
qmk cformat

* avoid float functions to compute range mapping for axis adc reading

* Remove V-USB support for now. Updated docs accordingly.

* Update tmk_core/protocol/lufa/lufa.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios

* Fix HID joystick report sending for ChibiOS.
Add one analog axis to the onekey:joystick keymap.
Fix pin state save and restore during joystick analog read for STM32
MCUs.

* Update tmk_core/protocol/chibios/usb_main.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/lufa/lufa.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Add missing mcuconf.h and halconf.h to onekey:joystick keymap.
Add suggested fixes from PR.

* Switch saveState and restoreState signature to use pin_t type.
onekey:joystick : add a second axis, virtual and programmatically animated.

* Update docs/feature_joystick.md

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update docs/feature_joystick.md

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Add PR corrections

* Remove halconf.h and mcuconf.h from onekey keymaps

* Change ADC_PIN to A0

Co-authored-by: achol <allecooll@hotmail.com>
Co-authored-by: José Júnior <jose.junior@gmail.com>
Co-authored-by: a-chol <achol@notamail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-08-29 14:30:02 -07:00
Drashna Jaelre
d2be3a7339
Fix Variable Trace handling (#9831)
It wants a number, but a number of files have it set to "no", even
though it's commented out.  This means that if you set it to no, it
will cause a compiler error.  This sets the default to "no", and
checks to make sure it's not set to "no" before processing it, and
striping the value from it.
2020-07-26 21:57:37 +01:00
MelGeek
d9eae3ef03
Support IS31FL3741 and IS31FL3741A. (#9201) 2020-06-20 14:49:15 +10:00
Nick Brassel
54b04d9665
Add SPI 25xx EEPROM support. (#8780) 2020-05-19 10:34:00 +10:00
brickbots
bfb2f8e0a8
Add Word Per Minute calculation feature (#8054)
* Add Word Per Minute calculation feature

* Fix copyright info

* Remove header from quantum.c, setup overloadable keycode inclusion for WPM, update docs

* Simplify logic for keycode filtering

* Adding link from summary to wpm_feature info

* Update docs/feature_wpm.md

Typo in function prototype example in docs

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

* Add WPM transport via i2c

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-03-23 00:06:16 +11:00
Joel Challis
5f9f62fb8c
Reorder logic within common_features.mk (#8517)
* Reorder logic within common_features.mk

* Revert haptic logic

* Add back path to make tests happy

* Update common_features.mk

Co-Authored-By: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-22 19:34:23 +11:00
Joel Challis
d96380e654
Initial arm->chibios pass - simplify some platform logic (#8450) 2020-03-21 16:20:04 +11:00
Nick Brassel
f2f2afe13b
Add support for STM32L0/L1 onboard EEPROM. (#8002)
* Add support for STM32L0/L1 onboard EEPROM.

* Update docs/eeprom_driver.md

Co-Authored-By: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2020-03-12 12:59:55 +11:00
Joel Challis
3a303bd2ae
Backlight - Carve out a better location for private driver functionality (#8329)
* rename backlight_soft to match rules.mk

* rename backlight_soft to match rules.mk - update common_features

* Carve out a better location for private driver backlight functionality
2020-03-07 12:09:49 +00:00
zvecr
5e1ce3988d Remove unused LED_BREATHING_TABLE 2020-03-06 22:29:01 -08:00
James Young
26eef35f07
2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
Joel Challis
393937b43f
Relocate grave keycode processing (#8082)
* Relocate grave keycode processing

* Tidy up code

* Refactor grave -> grave_esc
2020-02-04 18:49:10 -08:00
Joel Challis
0804f0a5dd
Merge pull request #7995 from zvecr/feature/split_arm_i2c_remove
Remove compilation of i2c for arm split
2020-01-27 22:40:32 +00:00
Joel Challis
9a0245b778
Fix boards which were overriding backlight without setting custom (#7970) 2020-01-27 22:31:54 +00:00
zvecr
6efcfaa264 Remove compilation of i2c for arm split 2020-01-24 14:11:01 +00:00
Joel Challis
e4a0f841e1
Update split serial code to use driver pattern (#7990)
* Move avr serial code to drivers

* Update src+= serial.c to driver pattern
2020-01-24 13:50:51 +00:00
Nick Brassel
d13ada1162 Add customisable EEPROM driver selection (#7274)
- uprintf -> dprintf
- Fix atsam "vendor" eeprom.
- Bump Kinetis K20x to 64 bytes, too.
- Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value.
- Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage.
- Add 24LC128 by request.
2020-01-24 12:45:58 +11:00
Jeremy Bernhardt
d11238f748 switching to you know whats up mode (#7921) 2020-01-17 16:15:58 -05:00
Joel Challis
61cd180163 Add ws2812 driver type define (#7888) 2020-01-15 09:03:48 +11:00
Joel Challis
b89e35bdd3
Relocate common backlight functionally (#7273) 2020-01-13 01:30:56 +00:00
Joel Challis
dcb7ca3f79
Move some common matrix code to a common location (#7699)
* Move some common matrix code to a common location

* Refactor some 'custom_matrix_helper' logic to use custom matrix lite

* Fix build for kinesis/stapelberg - abuse of vpath was picking up matrix.c from core when custom matrix was enabled

* Add validation for CUSTOM_MATRIX
2020-01-04 20:29:44 +00:00
Wilba
320822d75b VIA Configurator Refactor (#7268)
* VIA Refactor

* Remove old code

* review changes

* review changes

* Fix cannonkeys/satisfaction75/prototype:via build

* Add via.h to quantum.h

* Move backlight init to after backlight config load

* Merge branch 'master' into via_refactor_pr

* Update user's rules.mk to new way of enabling VIA

* Added id_switch_matrix_state

* Review changes
2020-01-03 12:52:00 -08:00
Joel Challis
ae40fc498b Relocate RGB keycode processing (#7508)
* Move rgb keycode logic to process_keycode

* Fixes for rgb matrix

* Fixes for mxss

* Fix inc/dec logic, add comments

* Fix return RAINBOW_SWIRL logic

* stop external use of rgb helper functions

* merge fix

* Fix 'defined but not used' when all animations are disabled
2019-12-16 12:27:53 -08:00
zvecr
d4c23d881f Convert backlight to follow driver rules pattern 2019-12-14 03:25:06 +00:00
Joel Challis
d598f01cb7
Relocate magic keycode processing (#7512)
* Move magic keycode processing to own file

* Save some bytes

* Update comments

* Update define to one thats not already used...

* Fix audio
2019-12-03 19:48:55 +00:00
Drashna Jaelre
542cb0a8ce [Core] Convert Dynamic Macro to a Core Feature (#5948)
* Convert Dynamic Macro to a Core Feature

This imports the code from Dynamic Macro into the core code, and handles it, as such.

This deprecates the old method but does not remove it, for legacy support. This way, no existing user files need to be touched.

Additionally, this reorganizes the documentation to better reflect the changes.

Also, it adds user hooks to the feature so users can customize the existing functionality.

Based heavily on and closes #2976

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Cleanup based on feedback

* Add short-form keycodes and document them

- add short-form keycodes to quantum/quantum_keycodes.h
- document the new aliases in docs/feature_dynamic_macros.md

* Add Dynamic Macros section and keycodes to docs/keycodes.md

* Make anti-nesting optional

* Add documentation for DYNAMIC_MACRO_NO_NESTING option

* Fix Merge artifacts

* Fix formatting typo in docs

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

* Remove DYNAMIC_MACRO_RANGE as it's not needed

* Fix includes and layer var type
2019-11-04 22:59:13 -08:00
Joel Challis
4531cc874e
Initial migration of software PWM backlight (#6709)
* Initial migration of software PWM backlight

* First pass at backlight driver docs

* Correct driver name in docs

* Run backlight_task when using BACKLIGHT_PINS

* Resolve backlight docs TODOs
2019-11-02 21:20:03 +00:00
Joel Challis
64b7cfe735 Refactor ps2avrgb i2c ws2812 to core (#7183)
* Refactor ps2avrgb i2c ws2812 to core

* Refactor jj40 to use ws2812 i2c driver

* Refactor ps2avrgb template to use ws2812 i2c driver

* Add ws2812 stub files

* clang-format and driver config

* Add ws2812 driver docs

* Fix default config values

* Update tmk_core/protocol/vusb/main.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>
2019-10-29 15:53:11 -07:00
Joel Challis
abfd6ed961
Move tmk_core/common/backlight to quantum/backlight (#6710)
* Move tmk_core/common/backlight to quantum/backlight

* Add guards to backlight inclusion

* Add guards to backlight inclusion

* Update backlight guards on clueboard/60

* Use full paths to avoid vpath issues
2019-10-17 17:48:58 +01:00
Joel Challis
38aefaf78e
ARM - Initial backlight support (#6487)
* Move AVR backlight to own file, add borrowed ARM implementation

* Tiny fix for backlight custom logic

* Remove duplicate board from rebase

* Fix f303 onekey example

* clang-format

* clang-format

* Remove backlight keymap debug

* Initial pass of ARM backlight docs

* Initial pass of ARM backlight docs - resolve todos

* fix rules validation logic

* Add f072 warning

* Add f072 warning

* tidy up breathing in backlight keymap

* tidy up breathing in backlight keymap

* add missing break to backlight keymap
2019-10-05 16:57:00 +01:00
Drashna Jaelre
265d8abee1
Fix enables for Haptic Feedback (#6707)
* Fix enables for Haptic Feedback

If you enabled bothe DRV2605 and SOLENOID, it would only enable one of these, not both. 

This fixes the check so that you can enable both options.

* Fix check for haptic feature
2019-09-14 19:57:07 -07:00
Drashna Jaelre
dab4967f1b
Add Dip Switch as a core feature (#6140)
* Add Dip Switches as a core feature

* Add documentation for Dip Switch feature

* Update Preonic Rev3 to use new feature and remove custom matrix

* Apply suggestions from code review

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Remove custom matrix line completely

Rather than just disabling it

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* DIP changes

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Use better check for DIP Switch configuration

* Add to show features

* Add bitmask callback for dip switch

* Fix OLKB Boards dip switch config

* Update docs to include bitmask example

* Fix comments/documentation

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Fix issues with docs and use example from @tuzonghua

* Fix wording

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Fix example to use proper formatting

Bad, BAAAAAAD drashna!!!

* Handle dip switch initialization better
2019-09-03 08:34:31 -07:00
Drashna Jaelre
6cccc22be9 Use QUANTUM_LIB_SRC for i2c_master.c inclusion (#5617)
Using QUANTUM_LIB_SRC prevents the warning when multiple sources add the i2c_master.c file. Boards such as the Ergodox EZ Glow see this warning every time they compile because the board uses the file in general, and because the RGB LED Matrix requires it, as well.
2019-07-09 07:57:14 -07:00
XScorpion2
22ba36a4d8 rgblight 255 hue (#5547) 2019-05-01 08:02:02 -07:00
XScorpion2
c745d9b82e Simple extended space cadet (#5277)
* Simplifying and Extending Space Cadet to work on Ctrl and Alt keys

* PR Review feedback

* Reverting back to keycodes
2019-04-29 20:21:46 -07:00
Daniel Prilik
1d784f0f95 RGB Matrix: Custom effects on a kb/user level (#5338)
* Revamped custom effects approach

See docs for example usage

* push-up RGB Matrix default mode

Override default effect using RGB_MATRIX_STARTUP_MODE.
Useful on boards without EEPROM support
(*cough* Massdrop ALT/CTRL *cough*)

* update docs
2019-04-29 14:48:41 -07:00
Ryan Caltabiano
0a645225b9 OLED Driver Feature 2019-04-20 08:05:10 -07:00
Takeshi ISHII
7e67bd791b Change split_common to use RGBLIGHT_SPLIT (#5509)
* add I2C_slave_buffer_t to quantum/split_common/transport.c

Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results.

* add temporary pdhelix(Patched Helix) code

* temporary cherry-pick from #5020

add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h

* add post_config.h support to build_keyboard.mk

* add quantum/rgblight_post_config.h, quantum/split_common/post_config.h

Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk.

quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined.

quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C.

* Change split_common's transport.c I2C to use the synchronization feature of rgblight.c

* Change split_common's transport.c serial to use the synchronization feature of rgblight.c

* test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix

* Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix"

This reverts commit 80118a6bbd.

[x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3)
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default

[x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default

[x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default

* Test End, Revert "temporary cherry-pick from #5020"

This reverts commit d35069f68b.

* Test End, Revert "add temporary pdhelix(Patched Helix) code"

This reverts commit aebddfc1a8.

* temporarily cherry-pick from #5020 to see if it passes the travis-ci test.

add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h

* Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test."

This reverts commit 647c0a9755.

* update docs/config_options.md

* update split_common/transport.c, improves maintainability of serial transaction IDs.

No change in build result.

* temporary cherry-pick from #5020

* fix build fail keebio/iris/rev3:default

* fix build fail lets_split_eh/eh:default

* Revert "temporary cherry-pick from #5020"

This reverts commit be48ca1b45.

* temporary cherry-pick from #5020 (0.6.336)

* Revert "temporary cherry-pick from #5020 (0.6.336)"

This reverts commit 978d26a8b3.

* temporary cherry-pick from #5020 (0.6.336)
2019-04-19 15:25:08 -07:00
XScorpion2
5fcd744ddb Features/ws2812 matrix driver (#5418)
* WS2812 driver implementation for RGB Matrix

* Added driver configuration docs
2019-04-14 17:50:35 -07:00
Jack Humbert
fa4052c26e Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes (#5532)
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance

* Updating effect function api for future extensions

* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary

* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain

* Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes

* fix bug in quantum/rgb_matrix_drivers.c

Co-Authored-By: jackhumbert <jack.humb@gmail.com>

* update command setting to the correct default

* correct rgb config

* remove commented-out lines

* update docs for the 3737

* Update docs/feature_rgb_matrix.md

Co-Authored-By: jackhumbert <jack.humb@gmail.com>
2019-04-08 16:57:43 -07:00
James Churchill
37932c293c Next set of split_common changes (#4974)
* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment
2019-03-12 10:23:28 -07:00
James Churchill
c7c4937eef Clean up debounce a bit (#5255) 2019-03-04 07:44:46 -08:00
Chris Lewis
c1c5922aae Velocikey: Match RGB animation speed to typing speed (#3754)
* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Experimental LED support (untested)

* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Added documentation

* Renamed feature to velocikey

* Reverted readme to original state

* Correct the readme title

* Updated feature name in the docs

* Update EECONFIG name

* Add compile-time toggles for velocikey

* Update feature documentation

* Revert "Merge branch 'led-support' into master"

This reverts commit e123ff5feb, reversing
changes made to df111a55b9.

* Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE

* Rename decay_task function to decelerate

* Apply suggestions from code review

Co-Authored-By: chrislewisdev <chris@chrislewisdev.com>

* Re-order eeconfig definitions

* Apply coding conventions

* Apply #ifdef check in lufa.c

* Refactored interval time checks into one functionc

* Small rename

* Fix unused function error for layouts not using all rgb effects

* Only update EEPROM if Velocikey is enabled

* Incorporate code review feedback

* Small adjustment to top-end decay rate

* Add Velocikey documentation to table of contents

* Bring tetris:default keymap size down by disabling audio
2019-02-21 07:22:46 -08:00
ishtob
2cee371bf1 Haptic feedback generalized - DRV2605 and solenoids (#4939)
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards

* Haptic feedback enhancements: on/off toggle working, feedback order working
todo:
-work on modes switching
-get modes switching to save to eeprom

* haptic enhancement - eeprom and modes added

* Added set and get functions for haptic feedback

* initial implementation of solenoids under haptic feedback

* changed eeprom to 32 bits to reserve blocks for future features

* start documentation of haptic feedback

* change keycode per comment from reviewers

* typo fixes

* added eeprom for solenoid configs

* added solenoid and docs

* Add/fix default parameters configs, improve docs

* more doc cleanup

* add in solenoid buzz toggle, clean up doc

* some fixes for error in compiling solenoid

* fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c

* fixes for avr side issues

* update keymap

* fix keymap compile error

* fix bugs found during solenoid testing

* set pin that is not powered during bootloader

* added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
2019-02-16 18:39:30 -08:00
Drashna Jaelre
c22f3ba3a2
Debounce refactor / API (#3720)
* Added xeal60 via clone of lets split

* Delete removed other keymaps

* Basic keymap (no FN). Compiles.

* Removed NP_STAR and NP_SLSH.

* Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes.

* Changed order of rules in TMK. Documented feature.

* Fixed missing whitespace in debounce documentation

Table wasn't working due to missing newline.

* Added bold in a few areas.

* DO NOT USE - Removed debounce from TMK.

* Remove accidental xeal60 commit

* DO NOT USE - debounce successfully compiled.

* DO NOT USE Revert back to original API to support split_keyboards.

* Working eager_pk

* Whitespace cleanup.

* Restored debounce.h since there wasnt any real change.

* Moved debouncing_time variable  to inside #if debounce

* Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used.

* Removed #include "matrix.h" from debounce.h

* Bug fix - was using MATRIX_ROWS instead of num_rows

* Fixed compilation error with debounce_sym_g

* Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE

* Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2.

* Fix compile error in debounce_eager_pk

* Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
2019-02-14 20:36:20 -08:00
skullY
cc738e32dd Force backlight on when led matrix is enabled 2019-02-10 15:37:12 -08:00
skullY
6b74dd6de5 led_matrix works now 2019-02-10 15:37:12 -08:00
skullY
fd698c43d7 The beginning of a simple led matrix driver for is31fl3731 2019-02-10 15:37:12 -08:00
alex-ong
7d8c629939 Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk 2019-01-27 07:23:15 +11:00
Alex Ong
d30d5eeb27 Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE 2019-01-26 23:01:07 +11:00
alex-ong
cce8dfab39 Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used. 2019-01-26 20:37:47 +11:00
alex-ong
574fc6444b Whitespace cleanup. 2019-01-26 17:38:52 +11:00
alex-ong
d0b691df0e DO NOT USE - debounce successfully compiled. 2019-01-26 17:03:46 +11:00
James Churchill
28929ad017 Simplify split_common Code significantly (#4772)
* Eliminate separate slave loop

Both master and slave run the standard keyboard_task main loop now.

* Refactor i2c/serial specific code

Simplify some of the preprocessor mess by using common function names.

* Fix missing #endif

* Move direct pin mapping support from miniaxe to split_common

For boards with more pins than sense--sorry, switches.

* Reordering and reformatting only

* Don't run matrix_scan_quantum on slave side

* Clean up the offset/slaveOffset calculations

* Cut undebounced matrix size in half

* Refactor debouncing

* Minor fixups

* Split split_common transport and debounce code into their own files

Can now be replaced with custom versions per keyboard using
CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes

* Refactor debounce for non-split keyboards too

* Update handwired/xealous to build using new split_common

* Fix debounce breaking basic test

* Dodgy method to allow a split kb to only include one of i2c/serial

SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only
that driver code in the binary.

SPLIT_TRANSPORT = custom (or anything else) will include neither, the
keyboard must supply it's own code

if SPLIT_TRANSPORT is not defined then the original behaviour (include
both avr i2c and serial code) is maintained.

This could be better but it would require explicitly updating all the
existing split keyboards.

* Enable LTO to get lets_split/sockets under the line

* Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE

* Remove avr-specific sei() from split matrix_setup

Not needed now that slave doesn't have a separate main loop.
Both sides (on avr) call sei() in lufa's main() after exiting
keyboard_setup().

* Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT.

* Add comments and fix formatting.
2019-01-17 10:08:14 -08:00
mtei
929065b1a9 Change handling of CUSTOM_MATRIX in common_features.mk slightly. 2019-01-13 11:04:40 -08:00
Drashna Jaelre
7f0def77a2 Move Split Common VPATH addition (#4716)
Specifically, only add the split_common folder to COMMON_VPATH if the feature is eanbled, to prevent issues with compilation
2018-12-31 08:45:44 -08:00
Takeshi ISHII
72d4e4bfd7 Replace serial.c of quantum/split_common/ (#4669)
* Add provisional Helix implementation to test the quantum/split_common.

* copy keyboards/helix/serial.[ch] to quantum/split_common/

* Make serial.c a pure driver.

Remove buffer name and buffer size from serial.c. They should be placed in the caller(matrix.c, split_utils.c).

* remove quantum/split_common/serial_backward_compatibility.h

* Changed array serial_master_buffer to structure serial_m2s_buffer.

* Changed array serial_slave_buffer to structure serial_s2m_buffer.

* Change keyboards/miniaxe/matrix.c

I also made changes to quantum/split_comon/matrix.c to keyboards/miniaxe/matrix.c.

Note: I contacted @ka2hiro, creator of miniaxe, and I got permission to change keyboards/miniaxe/matrix.c.

* update history comment in quantum/split_common/serial.c

* Revert "Add provisional Helix implementation to test the quantum/split_common."

This reverts commit 168c82ef82.

* fix keyboards/miniaxe/matrix.c, quantum/split_common/matrix.c

avr-gcc 4.9.[23] report error.
avr-gcc 5.4.0, avr-gcc 7.3.0 pass.
It is funny.

* update comment quantum/split_common/serial.c

* Reserve RGBLIGHT_SPLIT macro in quantum/split_common
2018-12-24 11:14:57 -08:00
Takeshi ISHII
8f790948e5 Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522)
* add temporary compile test shell script

* Extended support of SKIP_VERSION to make invariant compile results during testing.

* build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support

Support compiled object enclosed in library.

e.g.
```
LIB_SRC += xxxx.c
xxxx.c --> xxxx.o ---> xxxx.a
```

* remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c

* add SKIP_DEBUG_INFO into tmk_core/rules.mk

When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time.

* tmk_core/rules.mk: Library object need -fno-lto

* add SKIP_DEBUG_INFO=yes

* remove temporary compile test shell script

* add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h

* quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-14 21:31:56 -08:00
Takeshi ISHII
155e9310ff Make quantum/split_common/serial.[ch] configurable (#4419)
* add temporary compile test shell script

* add 'CONFIG_H += serial_backward_compatibility.h' into common_features.mk:SPLIT_KEYBOARD block

* add quantum/split_common/serial_backward_compatibility.h

SERIAL_PIN_PORT and other PIN define move to serial_backward_compatibility.h
SERIAL_BACKLIT_START move to split_util.h

* quantum/split_common/serial.c change to helix-serial.c style serial configuration

* add temporary file quantum/split_common/split-keyboards-list.txt

* add '#define SOFT_SERIAL_PIN D0' to keyboards/6lit/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/divergetm2/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/ergotravel/rev1/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/foobar/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/dactyl_manuform/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/qc60/config.h

* add '//#define SOFT_SERIAL_PIN D0' to keyboards/handwired/xealous/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/iris/rev*/config.h

* add '//#define SOFT_SERIAL_PIN D0' to keyboards/lets_split_eh/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/levinson/rev*/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/miniaxe/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/nyquist/rev?/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/quefrency/rev1/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/qwertyydox/config.h,keyboards/qwertyydox/rev1/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/redox/rev1/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/rorschach/rev1/config.h

* remove '#define SOFT_SERIAL_PIN D0' from quantum/split_common/serial_backward_compatibility.h

* remove temporary file quantum/split_common/split-keyboards-list.txt

* remove temporary compile test shell script

* Revert "remove temporary compile test shell script"

This reverts commit 15b0021b40.

* update quantum/split_common/compile_split_test.sh for new keyboard test

* add '#define SOFT_SERIAL_PIN D0' to keyboards/diverge3/config.h

* add '#define SOFT_SERIAL_PIN D0' to keyboards/40percentclub/25/config.h

* remove temporary compile test shell script

* update docs/config_options.md, quantum/template/avr/config.h

* fix quantum/template/avr/config.h

* fix typo  docs/config_options.md
2018-12-14 11:00:10 -08:00
ishtob
4099536c0e adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support (#4462)
* add initial support for hadron ver3

* add initial support for hadron ver3

* pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display

* initial work on OLED using qwiic driver

* early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality

* moved oled defines to config.h and added ifndef to micro_oled driver

* WORKING :D - note, still work in progress to get the start location correct on the 128x32 display.

* added equation to automatically calculate display offset based on screen width

* adding time-out timer to oled display

* changed read lock staus via read_led_state

* lock indications fixes

* Added scroll lock indication to oled

* add support for DRV2605 haptic driver

* Improve readabiity of DRV2605 driver.
-added typedef for waveform library
-added unions for registers

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Fixes for PR

* PR fixes

* fix old persistent layer function to use new set_single_persistent_default_layer

* fix issues with changing makefile defines that broken per-key haptic pulse

* Comment fixes

* Add definable parameter and auto-calibration based on motor choice
2018-12-04 08:04:57 -08:00
Drashna Jaelre
40313cfa3b Fix Terminal feature on ChibiOS 2018-11-06 00:40:02 -05:00
Jack Humbert
34112dac36
Adds the Proton C base project (#4224)
* adds proton c base

* fixes custom matrix include

* adds readme.md

* usable pins, readme update
2018-11-02 12:44:57 -04:00
Jack Humbert
85688e5b52 add support for encoders to core 2018-10-26 14:24:13 -07:00
Drashna Jaelre
e4eeb1eb23 Fix RGB Matrix feature processing in common_features.mk
Specifically, an "L" got appended to the controller names for te "valid types",
but did not get appended to the blocks that include the specific drives.
So, this breaks anything that isn't "Yes".
2018-09-28 17:11:05 -04:00
James Laird-Wah
f70f45ee67 RGB Matrix refactoring to open up for new drivers (#3913)
* rgb_matrix: use a driver ops struct

This is intended to avoid #ifdef proliferation on adding more drivers,
eg. model01, which use different architectures.

* rgb_matrix: document driver struct members

* rgb_matrix: remove unused LED testing code

* rgb_matrix: don't build into IS31x drivers unless being used

* rgb_matrix: refactor make config options

This ensures that the necessary files are included for any custom
RGB_MATRIX_ENABLE value, without having to add entries here for specific
boards. This particularly affects model01 because its controller is
integrated and won't be used anywhere else, so it's preferable not to
put it in common_features.mk.

This now validates the value of RGB_MATRIX_ENABLE.

It was necessary to fix an error in ergodox_ez rules.mk using the wrong
comment separator, yielding an invalid value.

* IS31x drivers: don't write the control registers all the time

This is only needed when they are changed. This is done in init() and
board- or keymap-specific code is free to make further changes.

* rgb_matrix: move structs from chip drivers to rgb_matrix_drivers.c

This approach is specific to the rgb_matrix functionality, so keep it
neatly separated from the raw chip drivers.
2018-09-27 10:40:18 -04:00
Joe Wasson
743449472e Make PREVENT_STUCK_MODIFIERS the default (#3107)
* Remove chording as it is not documented, not used, and needs work.

* Make Leader Key an optional feature.

* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`

* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-09-17 13:48:02 -04:00
Wilba6582
48a992f1c0 Zeal60/Zeal65/M60-A implementation (#3879)
* Initial version of zeal60

* WIP

* Fixes issue #900

* Adding RGB underglow functionality.
Fixed a compile-time conflict caused by enabling RGB underglow functionality.

* Refactor RPC protocol

* Fix last merge

* README for RGB underglow updated.

* Additional README changes.

* Adding RGBW strip software-based current-limiting functionality.

* RGBW current-limiting functionality should be handled by RGBSTRIP_MAX_CURRENT_PER_LIGHT instead.

* Updated README to reflect implementation of built-in current limiting.

* Keymap readability improvements.

* Minor keymap improvements.

* Fixed LED driver init sequence, formatting

* Dimming implementation tested, working.

* Stab LEDs synced with spacebar hits in effects.

* RGB underglow tested and functional. Simplified README for RGB underglow.

* Undid accidental file deletion from previous merge conflict. Safer values for RGB underglow.

* Improved arrow key positions in keymap.

* Added functionality to correct uneven RGB underglow. Refactored related code.

* Reverted to safer values for underglow.

* Changes for v0.3

* Custom LED brightness scaling will take place after current adjustment in order to avoid being overridden.

* Create keymap.c

Added split backspace and split shift to ISO layout

* Create config.h

Turned on LEDs for new layout

* Fixed bug where left spacebar stabilizer LED (LC06) would adopt color of row above.

* Added hhkb_wilba keymap

* Update keymap.c

* Update keymap.c

* Update keymap.c

* Added indicators, full param setting via host

* Added "mousekey" layout

* Added Zeal65 support, factory test mode

* Keycode safe range changed, caused bugs

* Bumped EEPROM version due to change in QMK keycodes

* Disable HHKB "blocked" LEDs if KC_NO in keymap

* Added "disable_hhkb_blocker_leds"

* Required overridden function for keymaps in EEPROM

* Added polar coordinate mapping, effect speed

* Force Raw HID interface number to 1 always

* Fixed last merge from master

* Added effect speed to default keymaps

* add BACKLIGHT_ prefix to vars

* add BACKLIGHT_ prefix to vars

* Keymap speed effect; keymap improvements/fixes
Readme updated to match changes

* Refactored to use common IS31FL3731/I2C drivers

* Fixed make rules, backlight disabled feature

* Make split rightshift default for Zeal65

* Added M60-A as a "version" of Zeal60.

* Renamed IS31FL3731 driver functions

* Fix suspend_wakeup_init_kb() being defined twice

* First pass refactor dynamic keymaps

* Updated to changed I2C and ISSI drivers

* Refactor zeal_color.* usage to quantum/color.*

* Updated Zeal65, fixed dynamic_keymap

* Major refactoring of Zeal60 backlight and API

* Lots of little cleanups

* Added readme.md

* Added readme.md

* Added LAYOUT_60*() macros, refactored and cleaned up default keymaps

* Fix compile error in suspend.c

* Added Zeal65 LAYOUT macros, info.json

* Added rama/m60_a, deleted zeal60/keymaps/m60_a

* Fixed rama/m60_a/keymaps/proto

* Fixed compilation error for suspend.c

* Requested changes for PR

* Fixed readme.md images

* Another readme.md fix

* Added drashna's requested changes
2018-09-13 14:37:13 -04:00