Commit graph

12 commits

Author SHA1 Message Date
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
calebchongc
5b394e82c9
Update checking board master function (#12493)
changed is_master to is_keyboard_master()
2021-04-25 13:59:37 +10:00
Pete Sevander
b0335b2731 Bigger combo index (#9318)
* Add change log

* Change combo index from uint8_t to uint16_t
2020-08-29 14:30:02 -07:00
James Young
fced377ac0
2020 May 30 Breaking Changes Update (#9215)
* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 13:14:59 -07:00
Jonas Avellana
0fdd37ee19
[Keymap] ninjonas keymap updates (#8373)
* [keymap(ninjonas)] ninjonas keymap updates

* [refactor] switching encoder rotation logic. recent pull seems to have flipped encoder stuff

* [keymap(lily58)] added chrome change profile key on RAISE

Co-authored-by: Jonas Avellana <jonas.avellana@workday.com>
2020-03-13 16:56:21 -07:00
Jonas Avellana
79e6b78669
[Keymap] ninjonas keymap updates (#8170)
* [keymap] ninjonas keymap updates

* [refactor(kyria)] updating keymap for numpad layer to be transparent rather than ignores

* [keymap(lily58)] added numpad layer

* [keymap(crkbd)] added numpad layer activated through tapdance

* [fix(8170)] fixing code review changes requested by noroadsleft

* [fix(8170)] updating comments and .md files to use 'Cmd' instead of  and &#8984;
2020-02-17 01:30:03 -08:00
Jonas Avellana
50554ca270
Ninjonas userspace (#8070)
* [keymap(kyria)] moved OLED & encoder implementation to separate classes

* [feat] created logic to cycle through hue wheel when starting keyboard

* [feat] created logic to cycle through hue wheel and return to user's default color

* [refactor] updating OLED layout for crkbd & lily58

* [refactor] updating OLED layout for crkbd & lily58

* [fix(8070)] updating encoder.c logic based off drashna's code review

* [refactor(8070)] added key to send  + Shift + M
2020-02-04 12:50:50 +11:00
Jonas Avellana
1aee492c0f
[keymap(kyria), refactor] created kyria keymap. refactored ninjonas userspace (#8053)
* [keymap(kyria), refactor] created kyria keymap. refactored ninjonas userspace and keyboards

* [fix(#8053)] removed redundant code based off Duckle29's code review

* [fix(#8053)] fixing typos

* [refactor(#8053)] updating oled timeout

* [fix(8053) resolved code review issues identified by noroadsleft
2020-01-31 22:38:05 -08:00
Jonas Avellana
2881f53dd4 [Keymap] updating ninjonas userspace (#6903)
* [refactor] updating ninjonas layout blocks and standardized LOWER & ADJUST

* [feat] added new macro M_TERM to open MacOS terminal app

* [feat] introducing mod-tap functionality on keymap

* [fix] fixing oled turning on when it feels like it. thanks @drashna for helping

* [feat] updating OLED to rotate logo 180 degrees

* [feat] updating keymaps to reflect VSCode frequent habits

* [refactor] converting crkbd modifier keys to layer blocks

* [fix(#6903)] converting _delay_ms to wait_ms on launching terminal macro
2019-10-07 10:42:03 -07:00
Jonas Avellana
cffe671a61 [Keymap] Updating crkbd RGB keymap implementation & ninjonas userspace updates (#6834)
* [keymap] Updating crkbd RGB implementation & ninjonas userspace updates

* [chore] adding process_record_oled method to process_records.h
2019-09-30 10:50:27 -07:00
Jonas Avellana
ff854565ce [Keymap] ninjonas keymap for crkbd & ninjonas userspace updates (#6797)
* [keymap(crkbd)] introducing crkbd keymap on ninjonas profile

* [keymap(crkbd)] introducing crkbd keymap on ninjonas profile

* [refactor(crkbd)] reducing file size by selecting RGB animations

* [refactor(crkbd)] added shiftit key

* [refactor(crkbd)] added shiftit key

* [chore(crkbd)] adding SLEEP_LED_ENABLE on rules.mk

* [refactor(crkbd)] added keylog & removed static rainbow RGB

* [feat(crkbd)] introduced em-dash '—' keymap

* [feat(crkbd)] added screenshot functionality

* [refactor(lily58,pinky3)] moving media keys

* [refactor(lily58)] Added emdash key

* [chore] removing NUMBERS & FUNCTIONS layers as they're useless

* [chore] removing NUMBERS & FUNCTIONS layers as they're useless

* [chore(crkbd,lily48)] Updating README.md

* [feat] added K_LAPP & K_RAPP to mimic command + tab

* [feat] added K_LAPP & K_RAPP to mimic command + tab

* [fix(#6797)] resolving changes requested by @drashna

* [fix(#6797)] first cut on using QMK OLED Driver

* [fix(#6797)] cleaning up rules.mk

* [fix(#6797)] making scrolling logo work

* [fix(#6797)] Using OLED Driver for Lily58

* [fix(#6797)] Moved OLED driver implementation to ninjonas userspace

* [fix(#6797)] Bringing back crkbd & lily58 logos

* [fix(#6797)] Turning off OLED based off @drashna's workaround in #5982

* [fix(#6797)] whoops! forgot to checkin crkbd/config.h

* [fix(#6797)] fixing issue with OLED randomly turning on

* [fix(#6797)] using default glcdfont.c for lily58 & crkbd

* [fix(#6797)] Using LINK_TIME_OPTIMIZATION_ENABLE rather than EXTRAFLAGS as per code review

* [fix(#6797)] updating M_MALL macro as per code review by @fauxpark
2019-09-25 21:28:06 -07:00
Jonas Avellana
f2ea65db6b [keymap] ninjonas userspace and keymaps for hotdox, lily58, & pinky3 (#6649)
* [keyboard] introducing ninjonas userspace & keymaps for hotdox, lily58, and pinky3

* [fix(#6649)] removed M_EPRM and used builtin EEP_RST keycode as-per review.

* [chore(#6649)] forgot to update keymap legend on lily58
2019-09-02 07:40:01 -07:00