Commit graph

157 commits

Author SHA1 Message Date
Joel Challis
72ce2655aa
Fix unit test execution (#23048) 2024-02-12 01:19:40 +00:00
Nick Brassel
5501e804ff
QMK Userspace (#22222)
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
2023-11-28 07:53:43 +11:00
Isaac Elenbaas
dd94877ec6
Improve test invocation, fix Retro Shift bugs, and add Auto+Retro Shift test cases (#15889) 2023-09-25 12:45:49 +10:00
Ryan
70e34e491c
Unicode, Unicodemap and UCIS refactor (#21659) 2023-08-27 13:30:19 +10:00
Joel Challis
88ec588ae7
Remove make all-<platform> build targets (#19496) 2023-01-19 10:44:41 +11:00
Joel Challis
5c730d971e
Migrate submodule dirty check to CLI (#19488) 2023-01-06 04:16:52 +00:00
Joel Challis
f9ee0571a7
Remove unused Makefile paths (#19487) 2023-01-04 14:25:48 +11:00
Joel Challis
c345278101
Replace list_keyboards.sh with CLI calls (#19485) 2023-01-03 14:15:29 +11:00
Joel Challis
20ee103399
Remove cmp checks from Makefile (#19480) 2023-01-02 22:26:26 +00:00
Joel Challis
4b2fd42122
Build warning when not valid work-tree (#19475) 2023-01-03 09:12:54 +11:00
Joel Challis
b297531dbf
Migrate 'make git-submodule' to CLI command (#19479) 2023-01-03 09:11:57 +11:00
jpe230
102f22f7e9
[Core] Quantum Painter - LVGL Integration (#18499)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-12-13 07:51:14 +11:00
Joel Challis
fe577daf96
Remove .noci functionality (#19122) 2022-11-21 02:03:38 +00:00
George Rodrigues
959f4cbb62
docs: some typos (#18582)
probably hacktoberism
2022-10-05 17:32:07 +01:00
QMK Bot
ee664e0960 Merge remote-tracking branch 'origin/master' into develop 2022-08-13 13:24:07 +00:00
Nick Brassel
dccb8ff7d6
Remove old submodules if present (#17930) 2022-08-13 23:23:32 +10:00
Stefan Kerkmann
d717396708
[Core] Add Raspberry Pi RP2040 support (#14877)
* Disable RESET keycode because of naming conflicts

* Add Pico SDK as submodule

* Add RP2040 build support to QMK

* Adjust USB endpoint structs for RP2040

* Add RP2040 bootloader and double-tap reset routine

* Add generic and pro micro RP2040 boards

* Add RP2040 onekey keyboard

* Add WS2812 PIO DMA enabled driver and documentation

Supports regular and open-drain output configuration. RP2040 GPIOs are
sadly not 5V tolerant, so this is a bit use-less or needs extra hardware
or you take the risk to fry your hardware.

* Adjust SIO Driver for RP2040

* Adjust I2C Driver for RP2040

* Adjust SPI Driver for RP2040

* Add PIO serial driver and documentation

* Add general RP2040 documentation

* Apply suggestions from code review

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-06-30 13:19:27 +02:00
Joel Challis
f7e7671f69
Migrate more makefile utilities to builddefs sub-directory (#16002) 2022-02-10 09:45:51 -08:00
Joel Challis
7df371750f
Workaround in Makefile for recursive rule matching (#15988)
* Bodge for recursive rule matching

* Bodge for recursive rule matching - force python3

* Tidy up
2022-01-25 11:50:35 +11:00
Joel Challis
bf9569db93
Various Makefile optimisations (#16015) 2022-01-24 23:54:56 +00:00
Stefan Kerkmann
a24bdccee0
[Tests] Increase QMK test coverage take 2 (#15269)
* Add per-test keymaps

* Add better trace and info logs for failed unit-tests

* Add layer state assertion with tracing message

* Use individual test binaries configuration options

* Add basic qmk functionality tests

* Add tap hold configurations tests

* Add auto shift tests

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-11-23 13:31:01 +11:00
Nick Brassel
7746aefe94 Revert "[Tests] Increase QMK test coverage (#13789)"
This reverts commit b6054c0206.
2021-11-23 09:54:04 +11:00
Stefan Kerkmann
b6054c0206
[Tests] Increase QMK test coverage (#13789)
* Add per-test keymaps

* Add better trace and info logs for failed unit-tests

* Add layer state assertion with tracing message

* Use individual test binaries configuration options

* Add basic qmk functionality tests

* Add tap hold configurations tests

* Add auto shift tests

* `qmk format-c

* Fix tests

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-11-23 08:15:04 +11:00
Joel Challis
b780c797be
Migrate makefile utilities to sub-directory (#14917) 2021-10-28 01:07:53 +01:00
Joel Challis
ad2b017ee6
Remove legacy Makefile functionality (#14858) 2021-10-18 00:15:26 +01:00
Nick Brassel
b2a186cf92
Purge uGFX. (#14720)
* Purge uGFX.

* Remove remnants of visualizer.

* Remove remnants of uGFX.
2021-10-07 10:57:48 +11:00
QMK Bot
4af4ef3428 Merge remote-tracking branch 'origin/master' into develop 2021-10-04 16:26:57 +00:00
Zach White
20f81af98a
Allow community layouts to be specified in info.json (#14682)
* move the community layout detection to python

* fixup tests
2021-10-04 09:26:19 -07:00
Zach White
596c4a1f87
Remove bin/qmk (#14231)
* Remove the bin/qmk script

* remove bin/qmk from workflows
2021-08-29 16:50:22 -07:00
QMK Bot
aabbaf11aa Merge remote-tracking branch 'origin/master' into develop 2021-07-28 11:02:58 +00:00
Ryan
491b83aa32
Update "make format" message (#13741)
* Update "make format" message

* Add examples for `qmk` command as well
2021-07-28 12:02:29 +01:00
Ryan
bbe43a91eb
CLI: Add subcommand to generate version.h (#13151) 2021-06-27 02:29:02 +10:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Nick Brassel
64a0f5a659
Add support for producing UF2-format binaries. (#12435)
* First stab at enabling builds of UF2-format binaries.

* Add description on producing a UF2 file.
2021-04-06 16:39:15 +10:00
Zach White
f2715a0593
Consistently use bin/qmk when that script is called (#12286)
* Pass QMK_BIN down to build_keyboard.mk

* choose the correct qmk script
2021-03-18 16:10:40 -07:00
Zach White
b0069c5c05
Begin the process of deprecating bin/qmk in favor of the global cli (#12109)
* Begin the process of deprecating bin/qmk in favor of the global cli

* Correctly set the qmk bin
2021-03-07 19:10:03 -08:00
Zach White
47b9b11009
Configure keyboard matrix from info.json (#10817)
* Make parameters from info.json available to the build system

* move all clueboard settings to info.json

* code formatting

* make flake8 happy

* make flake8 happy

* make qmk lint happy

* Add support for specifying led indicators in json

* move led indicators to the clueboard info.json

* Apply suggestions from code review

Co-authored-by: Erovia <Erovia@users.noreply.github.com>

* add missing docstring

Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-30 10:27:37 -08:00
Zach White
5edfdeff50
remove some old and unused code from Makefile (#11336) 2020-12-29 19:42:09 +00:00
Zach White
03cbee8637
Add the ability to exclude keyboards from travis builds (#11178)
* add the ability to exclude keyboards from travis builds

* add filtering to make all:

* only skip keyboards during make all:

* working implementation

* forego a CI_KEYBOARDS variable

* optimize the startup by only listing keyboards once

* add sort -u to all list_keyboard invocations

* move the if else if tree back to 1 level
2020-12-18 12:17:53 -08:00
James Young
c66df16644
2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change
2020-11-28 12:02:18 -08:00
James Young
fced377ac0
2020 May 30 Breaking Changes Update (#9215)
* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 13:14:59 -07:00
Ryan
7ef2ea3d49
Improve the Makefile message a bit more (#9161) 2020-05-22 00:28:55 +01:00
ridingqwerty
dae6f6b39b
Remove broken example from Makefile (#9159)
* Remove broken example from Makefile

* Correct example in Vagrantfile
2020-05-21 20:33:20 +01:00
Joel Challis
2dd47a3bf4
avoid 'Entering|Leaving directory' messages (#9061) 2020-05-14 23:17:17 +01:00
skullY
6f30b402a2 Revert "Fix conflicting types for 'tfp_printf' (#8269)"
This reverts commit e17b55e33a.
2020-05-04 09:25:44 -07:00
Joel Challis
e17b55e33a
Fix conflicting types for 'tfp_printf' (#8269)
* Refactor to use mpaland/printf

* trim firmware size

* remove keymap changes

* run clang format

* Fixup after rebase

* fix up git-submodule command for printf
2020-05-03 23:19:51 -07:00
James Young
26eef35f07
2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
Joel Challis
d2115f7d1c
Allow 'make all:<user>' to not build EVERYTHING (#7402) 2019-11-20 22:32:16 +00:00
fauxpark
7c0edbe800 Set git submodule update depth to 50 (#7269) 2019-11-05 11:50:18 -08:00
fauxpark
2df3799e3d Add list-keymaps make target (#5563) 2019-09-21 00:00:58 -07:00