Commit graph

80 commits

Author SHA1 Message Date
James Young
a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
Joel Challis
790f94533c
Refactor to use led config - Part 6 (#12115)
* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* revert changes
2021-03-10 22:48:18 +00:00
QMK Bot
8b6a9e2ae9 Merge remote-tracking branch 'origin/master' into develop 2021-02-18 20:31:38 +00:00
MechMerlin
9e05810cfe
Budget96 VIA (#11737)
* add budget96 via keymap and adjust vid and pids

* update dates

* Update keyboards/donutcables/budget96/keymaps/default/keymap.c

Co-authored-by: Joshua Diamond <josh@windowoffire.com>

Co-authored-by: Joshua Diamond <josh@windowoffire.com>
2021-02-18 15:31:09 -05:00
Drashna Jaelre
7161d65070
Remove FAUXCLICKY feature (deprecated) (#11829) 2021-02-09 09:49:05 -08:00
Ryan
6937f1d70e
Remove MIDI_ENABLE_STRICT from keyboards' config.h (#11679) 2021-01-27 17:26:26 +11:00
Ryan
f325bd6eb2
Remove DESCRIPTION, B-D (#11513) 2021-01-15 05:00:04 +11:00
DonutCables
4a37af79e9
[Keyboard] Budget96 info cleanup and updates (#10268)
* Cleanup/updates to Budget96 info

* Add personal keymap

* Requested config.h update

Co-authored-by: Ryan <fauxpark@gmail.com>

* Requested rules.mk update

Co-authored-by: Ryan <fauxpark@gmail.com>

* Requested keymap.c update

* Requested config.h update

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-09-21 23:44:23 -07:00
Ryan
ce842f912e
Remove DEBUG_LEVEL from V-USB rules.mk (#9117) 2020-05-17 21:37:04 +01:00
Ryan
51a81813b0
V-USB: Consolidate usbconfig.h's into a single file (#8584) 2020-03-31 13:17:04 +01:00
Ryan
14079ce698
V-USB: Use structs for USB descriptors (#8572)
* V-USB: Use structs for USB descriptors

* Update usbconfigs

* cformat pass
2020-03-28 13:02:25 +11:00
Ryan
4d76d85d7b
V-USB: Use manufacturer and product strings from config.h (#7797)
* V-USB: Use manufacturer and product strings from config.h

* Update board configs
2020-03-26 13:11:32 +00:00
Ryan
7e30d189e9
Update config.h - Fixed number of RGB LEDs (#8316)
There are 18 LEDs, not 16
2020-03-05 12:39:50 +11:00
ridingqwerty
66fe3001e4
Trim firmware sizes from default rules.mk, part 1 (#8027)
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files

* Correct some 'rules.mk' in boards buried under vendor folders

* PR8027 patch

Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-01-29 12:51:25 -05:00
fauxpark
b568999769 Fix LED configuration for PS2AVRGB boards (#7989)
* Fix LED configuration for PS2AVRGB boards

* Undo backlight on state changes
2020-01-23 19:24:10 -08:00
fauxpark
f5209aa4e9 Remove custom backlight code for PS2AVRGB boards (#7775)
* Remove custom backlight code for PS2AVRGB boards

* Remove custom driver setting

* BACKLIGHT_BREATHING goes in config.h, not here

* Don't need to include backlight.c again here either

* Turn on backlight for Canoe

* Disable console on a few boards due to oversize
2020-01-18 23:00:32 -08:00
Joel Challis
6a8c0a6468 [Keyboard] Update ATmega32A readme files to match template (#7462)
* Update atmega32a readme files to match template

* Update atmega32a readme files to match template - fixes

* Apply suggestions from code review
2019-11-23 20:42:20 -08:00
fauxpark
519df78cdb
Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00
fauxpark
3047335729
Add support for configurable polling interval and power usage o… (#7336)
* Add support for custom polling interval and power usage on V-USB boards

* Use 1ms as default for now
2019-11-15 10:21:22 +11:00
fauxpark
efa28d0f5c Convert some PS2AVRGB boards to I2C WS2812 driver (#7241)
* Convert some PS2AVRGB boards to I2C WS2812 driver

* Fix Travis failure for bface
2019-11-04 16:05:03 -08:00
MechMerlin
dbce3f648b Budget96 Production PCB Fix (#6900)
* production version of the PCB has the top two right most keys swapped around. There are only 6 protos in existence and one of them is mine so we can just do this.

* update readme by adding backticks
2019-10-06 04:19:49 +11:00
Simon R
ab3fba2cdf [Keyboard][Fix] budget96 RGB light-switches (#6840)
Adding code to make the RGB switching work. Taken from the singa (singa.c).

Signed-off-by: Simon R <me@dieideeistgut.de>
2019-09-30 10:59:34 -07:00
fauxpark
de4a47f1cc Cleanup rules.mk for 32A and 328P keyboards (#6767) 2019-09-20 22:06:32 -07:00
fauxpark
f34299efd7 Cleanup rules.mk for USB64 and USB128 keyboards (#6769) 2019-09-19 09:55:03 -07:00
fauxpark
0bd03150e5 Remove NO_BACKLIGHT_CLOCK (#6418) 2019-07-27 01:37:33 +01:00
fauxpark
f14629ed1c Remove/migrate action_get_macro()s from default keymaps (#5625)
* Remove/migrate action_get_macro()s from default keymaps

* Leave these breaks alone
2019-07-15 23:04:02 -07:00
Drashna Jaelre
faaaa134fd Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997) 2019-06-06 12:09:56 -07:00
MechMerlin
a8e3462b4b [Keyboard] Refactor budget96 to remove custom i2c code in favor of QMK i2c_master (#5571)
* remove custom i2c code in favor of QMK i2c_master

* fix readme

* disable bootmagic as it doesn't work on bmc boards
2019-04-07 07:34:01 -07:00
MechMerlin
7e5c107d43 [Keyboard] Move scrabblepad into donutcables directory (#5553)
* move scrabblepad into donutcables directory

* use pragma once

* update scrabblepad readme
2019-04-04 15:16:59 -07:00
MechMerlin
f698f1e3f4 [Keyboard] Add Budget96 by Donut Cables (#5550)
* initial commit of budget96

* non logic changes

* add my name to readme

* update matrix.c

* make the matrix representation of the layout macro

* fix up LAYOUT macro

* add missing character

* initial keymap commit

* put KC_NO where they belong

* basic keymap

* fix matrix row and col definition

* The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues

* update the readme

* change up manufacturer for budget96

* update copyright date

* fix up the switch matrix and provide a keymap

* forgot the keymap

* other matrix fixes

* missing a few keys in the switch matrix

* messed up the row tracing

* tweak keymap a bit

* use a lower case k

* fix spacing for markdown rendering

* put in the reset key documentation

* clean up the file a little

* use LAYOUT_96_ansi

* add a second layer for lighting controls

* add in lighting support

* add QMK Configurator support

* use pragma once

* remove un needed matrix.c

* convert to GPIO methods

* turn on rgblight_enable and get rid of custom matrix

* set bootloadhid_bootloader to 1

* set bootmagic to lite and set it to k50

* add reset information to readme

* use i2c_master instead of custom i2c

* restore the custom i2c code

* introduce reset key and eep_rst in function layer 1

* fix up pip3 install commands

* fix up device and manufacturer names

* remove un needed comments

* add an ALL layout macro along with QMK Configurator support

* move budget96 into donutcables directory since he actually has different boards

* add a short donut cables blurb taken from his website

* update readme for make instructions to point to the new path

* Update keyboards/donutcables/budget96/config.h

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* Update keyboards/donutcables/budget96/readme.md

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* Update keyboards/donutcables/budget96/info.json

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* turn on backlight

* Update keyboards/donutcables/budget96/readme.md

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* remove extra UART and BOOTLOADER settings that are not needed
2019-04-04 14:25:35 -07:00