Commit graph

235 commits

Author SHA1 Message Date
Ryan
d646cba72a
Remove Bluefruit protocol (#9008)
* Remove Bluefruit protocol

* Remove dir from doxygen TODO pile
2020-05-04 23:05:45 +01:00
skullY
6f30b402a2 Revert "Fix conflicting types for 'tfp_printf' (#8269)"
This reverts commit e17b55e33a.
2020-05-04 09:25:44 -07:00
QMK Bot
1ff526dac0 format code according to conventions [skip ci] 2020-05-04 06:59:44 +00:00
Joel Challis
e17b55e33a
Fix conflicting types for 'tfp_printf' (#8269)
* Refactor to use mpaland/printf

* trim firmware size

* remove keymap changes

* run clang format

* Fixup after rebase

* fix up git-submodule command for printf
2020-05-03 23:19:51 -07:00
Joel Challis
5f82b0782f
Initial vusb console support (#8559) 2020-05-03 01:25:39 +01:00
Joel Challis
374525c995
Allow some usbconfig.h overrides at the keyboard level (#8647) 2020-04-29 00:17:54 +01:00
Ryan
99f7fe6bd4
Clean up ATSAM ifdefs (#8808) 2020-04-20 15:38:34 -07:00
Nick Brassel
46e4493761
Fix AVR SPI parameter configuration, remove timeouts due to sync protocol. (#8775) 2020-04-13 17:09:50 +10:00
Nick Brassel
05e9ff6554
Add support for hardware and board initialisation overrides. (#8330)
* Add support for hardware and board initialisation overrides.

* qmk cformat.

* Add some documentation.

* Docs clarity.

* Make early_hardware_init_pre a no-op for now, until migrations occur.

* Doco update

* Make distinction between keyboard and ChibiOS board in docs

* Doc anchors.

* Update tmk_core/protocol/chibios/main.c

Co-Authored-By: Joel Challis <git@zvecr.com>

* Rework bootloader entry to be off by default, allow opting-in.

Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-13 09:39:38 +10:00
Manna Harbour
07c75feba3
Add PS2_MOUSE_ROTATE to compensate for device orientation (#8650)
* Add PS2_MOUSE_ROTATE to compensate for device orientation

* fixup! Add PS2_MOUSE_ROTATE to compensate for device orientation

* Reformat with IndentPPDirectives: AfterHash as per #6316
2020-04-09 01:29:27 -07:00
Ryan
400ca2d035
spi_master for AVR (#8299)
* Change _delay_ms/us() to wait_ms/us()

* Switch to platform-agnostic GPIO macros

* Add AVR spi_master and migrate Adafruit BLE code

* Set verbose back to false

* Add clock divisor, bit order and SPI mode configuration for init

* Add start and stop functions

* Move configuration of mode, endianness and speed to `spi_start()`

* Some breaks here would be good

* Default Adafruit BLE clock divisor to 4 (2MHz on the Feather 32U4)

* Remove mode and divisor enums

* Add some docs

* No hr at EOF

* Add links in sidebar
2020-04-08 11:04:31 +10:00
QMK Bot
7642075fc3 format code according to conventions [skip ci] 2020-04-05 22:57:28 +00:00
Ryan
ca91dc594b
V-USB: Remove some stuff from usbconfig.h that should not be configurable (#8656)
* V-USB: Remove some stuff from usbconfig.h that should not be configurable

* Clean up some ifdefs

* And some more

* Even more
2020-04-05 23:25:07 +01:00
Drashna Jaelre
845953cc67
V-USB remote wakeup (#7627)
* V-USB remote wakeup

Backport from tmk/tmk_keyboard@391c979be7

* Change vusb.c remote wake config

as per fauxpark's suggestion
2020-04-05 18:18:19 +10:00
Joel Challis
58a9c84d6b
Strip out features to allow minimum firmware sizes (#8645) 2020-04-01 21:06:22 +01:00
yiancar
c217186bea
Updated V-USB template to allow usbFunctionWriteOut (#8634) 2020-04-01 17:11:24 +01:00
Ryan
95c5c11d0b
Miscellaneous cleanups (#8639)
* Miscellaneous cleanups

* Cast NO_PIN
2020-04-01 15:49:45 +01:00
Ryan
51a81813b0
V-USB: Consolidate usbconfig.h's into a single file (#8584) 2020-03-31 13:17:04 +01:00
Takuya Urakawa
89a675d57c
add hid_raw feature to VUSB (#8380)
* rewrite usbhid feature on vusb

* Apply suggestions from code review

Co-Authored-By: Ryan <fauxpark@gmail.com>

* fix typo

* fix typo again

* Update tmk_core/protocol/vusb/vusb.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* clean up defines

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-30 21:15:05 +01:00
Ryan
14079ce698
V-USB: Use structs for USB descriptors (#8572)
* V-USB: Use structs for USB descriptors

* Update usbconfigs

* cformat pass
2020-03-28 13:02:25 +11:00
Joel Challis
23e942ae4e
Enable SLEEP_LED on ATmega32A (#8531)
* Port over some AVR backlight logic to SLEEP_LED

* Port over some AVR backlight logic to SLEEP_LED - add timer 3

* Port over some AVR backlight logic to SLEEP_LED - clang format

* Enable SLEEP_LED within vusb protocol
2020-03-26 18:21:33 +00:00
Ryan
4d76d85d7b
V-USB: Use manufacturer and product strings from config.h (#7797)
* V-USB: Use manufacturer and product strings from config.h

* Update board configs
2020-03-26 13:11:32 +00:00
QMK Bot
9fbf17b90e format code according to conventions [skip ci] 2020-03-26 03:10:16 +00:00
foxx1337
96bfce7000
Add RawHID support to ATSAM (Massdrop boards) (#8530)
* Add support for RAW endpoint for arm_atsam

This the excellent work from helluvamatt/qmk_firmware in bb6eeb93b.

* Reformat arm_atsam RAW endpoint code

Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>
2020-03-26 02:34:57 +00:00
Joel Challis
6ceaae30f5
Run clang-format manually to fix recently changed files (#8552) 2020-03-25 14:39:53 +11:00
QMK Bot
c89012566c format code according to conventions [skip ci] 2020-03-16 10:01:22 +00:00
Takeshi ISHII
9dfebb9d67
Remove unnecessary import of rgblight.h in tmk_core/protocol/*/*.c (#8432)
* Remove unnecessary import of rgblight.h in tmk_core/protocol/*/*.c

 * tmk_core/protocol/chibios/main.c
 * tmk_core/protocol/lufa/lufa.c

see #8380 for tmk_core/protocol/vusb/main.c.

* Remove '#include "rgblight.h"' from tmk_core/protocol/vusb/main.c.
2020-03-16 10:26:32 +01:00
Takeshi ISHII
dbbab40981
Refactor rgblight_reconfig.h (#7773)
* Moved contents of rgblight_reconfig.h to rgblight_post_config.h.

In #3582, rgblight_reconfig.h had to be newly created. Now, the build system of qmk_firmware has a post_cofig feature, so that what was done in rgblight_reconfig.h can now be realized in rgblight_post_config.h.

**This commit does not change the build result.**

Testing script
```shell
  # build on master
  git checkout master
  echo master > /tmp/master_md5.txt

  # RGBLIGHT_ENABLE = no
  make HELIX=verbose helix/rev2:default:clean
  make HELIX=verbose helix/rev2:default
  md5 helix_rev2_default.hex >> /tmp/master_md5.txt

  # RGBLIGHT_ENABLE = yes, with animations
  make HELIX=verbose helix/rev2/back:default:clean
  make HELIX=verbose helix/rev2/back:default
  md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt

  # RGBLIGHT_ENABLE = yes, without animations
  make HELIX=verbose,no_ani helix/rev2/back:default:clean
  make HELIX=verbose,no_ani helix/rev2/back:default
  md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt

  # build on refactor_rgblight_reconfig.h
  git checkout refactor_rgblight_reconfig.h
  echo refactor_rgblight_reconfig.h > /tmp/branch_md5.txt

  # RGBLIGHT_ENABLE = no
  make HELIX=verbose helix/rev2:default:clean
  make HELIX=verbose helix/rev2:default
  md5 helix_rev2_default.hex >> /tmp/branch_md5.txt

  # RGBLIGHT_ENABLE = yes, with animations
  make HELIX=verbose helix/rev2/back:default:clean
  make HELIX=verbose helix/rev2/back:default
  md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt

  # RGBLIGHT_ENABLE = yes, without animations
  make HELIX=verbose,no_ani helix/rev2/back:default:clean
  make HELIX=verbose,no_ani helix/rev2/back:default
  md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt

  diff -u /tmp/master_md5.txt /tmp/branch_md5.txt
```

Test result:
```
--- /tmp/master_md5.txt 2020-01-03 15:42:22.000000000 +0900
+++ /tmp/branch_md5.txt 2020-01-03 15:42:42.000000000 +0900
@@ -1,4 +1,4 @@
-master
+refactor_rgblight_reconfig.h
 MD5 (helix_rev2_default.hex) = f360032edd522448366d471d8f4f8181
 MD5 (helix_rev2_back_default.hex) = 0c663acc6cccc44476b3b969ad22a48f
 MD5 (helix_rev2_back_default.hex) = e66b1195ff6d38e6e22c975b8ae42fd3
```

* Expressions that are too long are difficult to read, so wrap them.

* Edit the expression again

* remove `defined(RGBLIGHT_ANIMATIONS)` in `tmk_core/common/*/suspend.c`, `tmk_core/protocol/*/main.c`

move contents of rgblight_reconfig.h to rgblight.h.

The following changes were made to rgblight.h.

```diff
+#ifdef RGBLIGHT_USE_TIMER
 void rgblight_task(void);

 void rgblight_timer_init(void);
 void rgblight_timer_enable(void);
 void rgblight_timer_disable(void);
 void rgblight_timer_toggle(void);
+#else
+#define rgblight_task()
+#define rgblight_timer_init()
+#define rgblight_timer_enable()
+#define rgblight_timer_disable()
+#define rgblight_timer_toggle()
+#endif
```

The following changes were made to tmk_core/common/avr/suspend.c, tmk_core/common/chibios/suspend.c, tmk_core/protocol/chibios/main.c, tmk_core/protocol/lufa/lufa.c, tmk_core/protocol/vusb/main.c.

```diff
-#    ifdef RGBLIGHT_ANIMATIONS
     rgblight_timer_enable();
-#    endif
```
```diff
-#if defined(RGBLIGHT_ANIMATIONS) && defined(RGBLIGHT_ENABLE)
+#if defined(RGBLIGHT_ENABLE)
         rgblight_task();
 #endif
```

* remove 'defined(RGBLIGHT_ANIMATIONS)' in tmk_core/common/keyboard.c

Co-authored-by: Joel Challis <git@zvecr.com>
2020-03-10 01:46:03 -07:00
James Young
26eef35f07
2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
Ryan
088b64ab3d
Improvements to extrakey HID descriptors (#8156) 2020-02-25 12:18:11 +11:00
yiancar
eb9c2429c6
Update main.c (#8198) 2020-02-22 10:10:41 -05:00
QMK Bot
7740470a94 format code according to conventions [skip ci] 2020-02-12 06:50:23 +00:00
fauxpark
eaf32621aa
Align VUSB HID descriptors with LUFA/ChibiOS (#7675)
* Align VUSB HID descriptors with LUFA/ChibiOS

* Wrap send_system and send_consumer in ifdefs too

* Offset system usages to match LUFA/ChibiOS
2020-02-12 17:19:39 +11:00
fauxpark
174a15d07d Remove PJRC USB stack 2020-02-08 11:07:43 -08:00
Drashna Jaelre
0010d0c45e
Add Midi Endpoint task to ChibiOS main (#8071) 2020-02-04 18:28:47 -08:00
QMK Bot
fa9c74c6a2 format code according to conventions [skip ci] 2020-02-02 20:47:40 +00:00
fauxpark
b2ce2f8a34
Dedupe extrakey report struct, and send functions in V-USB & LUFA (#7993)
* Dedupe extrakey report struct, and send functions in V-USB & LUFA

* Doc comment for consistency

* Wrap it in ifdef to prevent unused function error

* Do the same for ATSAM
2020-02-02 12:17:05 -08:00
QMK Bot
4888a118c3 format code according to conventions [skip ci] 2020-02-02 02:40:30 +00:00
fauxpark
e036b94a21
Align ATSAM HID descriptors with LUFA/ChibiOS (#7651)
* Align ATSAM HID descriptors with LUFA/ChibiOS

* Don't hardcode raw endpoint size
2020-02-02 13:10:57 +11:00
xyzz
eb309be6f0
Improve VIRTSER performance (#7528) 2020-01-31 11:30:41 +11:00
QMK Bot
09370a95db format code according to conventions [skip ci] 2020-01-25 22:04:42 +00:00
George Harris
e9ffc53476 Fix unaligned access with LTO (#7801)
Forces 4 byte alignment for USB input & output buffers to prevent unaligned accesses by chibios with LTO enabled
2020-01-25 13:35:39 -08:00
QMK Bot
dee1d68dde format code according to conventions [skip ci] 2020-01-21 14:48:06 +00:00
fauxpark
123ae73efc Fix lock LEDs for ChibiOS when using shared endpoints (#7877)
* Fix lock LEDs for ChibiOS when using shared endpoints

* Tweak comments

* Doesn't need to be uint16 anymore
2020-01-21 14:17:33 +00:00
Joel Challis
ba628a28bc
Move rgblight and backlight task to common location (#7733) 2020-01-19 00:59:09 +00:00
xyzz
83be1aed76 chibios/usb_main: re-check USB status in send_keyboard after sleeping the thread (#7784)
* chibios/usb_main: re-check USB status in send_keyboard after sleeping the thread

* change send_keyboard to only have 1 exit point
2020-01-13 15:08:14 -08:00
Joel Challis
ff5742da9f Fix KEYBOARD_SHARED_EP on ChibiOS (#7860) 2020-01-13 09:21:42 +11:00
Drashna Jaelre
1f26101f0e
remove SERIAL_SOFT_DEBUG macro (#7625)
SERIAL_SOFT_DEBUG can be defined in the `config.h`

Backported from tmk/tmk_keyboard@c74eee6327
x
2019-12-13 18:06:18 -08:00
Joel Challis
80c2e26741
Fix ChibiOS USB config for chips which support OTGv1 (#7564)
* Align endpoint config as per rest of file (fixes #4783)

* Add comments about explicit order use

* Update tmk_core/protocol/chibios/usb_main.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-12-14 01:29:54 +00:00
Joel Challis
071eb2478f Remove mbed files (#7605)
* Remove mbed files

* Remove mbed files - fix comment

* Remove mbed logic blocks
2019-12-11 11:36:00 -08:00