Commit graph

102 commits

Author SHA1 Message Date
James Young
4b453dca92
Remove MIDI Configuration boilerplate (#11151)
* remove keyboard-level instances of `MIDI_ENABLE = no`

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e  '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} +
```

Co-Authored-By: Nick Brassel <nick@tzarc.org>

* fix case-sensitivity issues on MIDI_ENABLE

Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} +
```

* replace `# MIDI controls` with `# MIDI support`

Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} +
```

* align inline comments

Aligns the inline comments to the length used by the QMK AVR rules.mk template.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes           # MIDI support;g'  {} +
```

* remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} +
```

* remove MIDI configuration boilerplate from keyboard config.h files

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-16 06:51:13 +10:00
James Young
a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
Nick Brassel
ee3c138385 Merge remote-tracking branch 'upstream/master' into develop 2021-08-02 13:55:36 +10:00
peott-fr
d191ccfdc5
[Keymap] Add peott-fr Kinesis keymap (#13812) 2021-07-31 06:14:56 -07:00
QMK Bot
e681c4368b Merge remote-tracking branch 'origin/master' into develop 2021-07-24 15:40:38 +00:00
James Won
44a0aa924c
[Keymap] add kinesis/keymaps/jwon (#13618)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-24 08:40:05 -07:00
Drashna Jaelre
816accda3d
Fix errors with matrix_output_unselect_delay function calls (#13645) 2021-07-22 21:42:59 -07:00
Xelus22
b73a29aaea
[Bug] Develop - Change uint32_t to layer_state_t (#13596)
* fix sat75

* update uint32_t to layer_state
2021-07-19 09:50:55 -07:00
Zach White
adf0d70da4
first pass: matrix consistency improvements (#13471) 2021-07-11 08:41:57 -07:00
Ryan
50d4dfd2e6
keymap_extras: Remove deprecated defines (#12949) 2021-07-06 09:05:11 +10:00
QMK Bot
7fdb95af36 Merge remote-tracking branch 'origin/master' into develop 2021-07-01 08:08:12 +00:00
Michael Stapelberg
2b8ad391ae
[Keyboard] update debounce time on kint boards (#13351)
related to https://github.com/kinx-project/kint/issues/39
related to https://github.com/qmk/qmk_firmware/pull/12626
2021-07-01 01:07:37 -07:00
Michael Stapelberg
f533d9e033
add kinT kinesis keyboard controller (kint41 variant) (#13333)
fixes https://github.com/kinx-project/kint/issues/5
2021-06-30 08:54:45 +10:00
Michael Stapelberg
143ded332d
kint36: set correct EEPROM size (#12946)
The Teensy 3.6 comes with 4096 bytes of EEPROM.

This is commit 1 of 2 to make the EEPROM work.
The next commit changes the core code to wire up the EEPROM.
2021-06-24 12:54:18 +10:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Dave Vandyke
75da5e9742
[Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) 2021-05-14 08:30:21 -07:00
Michael Stapelberg
c922fc2cf3
[Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) 2021-04-20 10:08:29 -07:00
Michael Stapelberg
3d32cbb0dc
[Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) 2021-04-20 10:08:01 -07:00
QMK Bot
0235fc7ab2 Merge remote-tracking branch 'origin/master' into develop 2021-04-19 06:43:21 +00:00
Michael Stapelberg
17c880b076
[Keymap] add kinesis/keymaps/stapelberg (#12430) 2021-04-18 23:42:40 -07:00
Dave Vandyke
15f7cc3bde
[Keymap] Add kzar keymap for Kinesis Advantage (#12444) 2021-04-13 11:39:39 +02:00
James Young
a8d64c8b89
Change BOOTMAGIC_ENABLE=yes to use Bootmagic Lite (#12172) 2021-04-12 21:18:52 +02:00
QMK Bot
028a0dcd3d Merge remote-tracking branch 'origin/master' into develop 2021-04-03 05:12:49 +00:00
Michael Stapelberg
a7920acff5
keymaps: fix kinesis default keymap progrm/reset keycode (#12429)
The right-most top-most key on the Kinesis Advantage keyboard is labeled
“Progrm” and was meant to enter the Teensy bootloader as per the comment.

However, the keycode was set to KC_1, which just produces a “1”.
It should be RESET instead.

This commit fixes KC_1 to RESET in all files where the fix is needed.
The other files have already been fixed independently.
2021-04-02 22:12:24 -07:00
Michael Stapelberg
9d3b11d485
add kinesis/kint36 (#10171)
This moves the config_common.h into the files that include ../config.h,
so that the kint36/config.h does not include it (which would cause
compilation errors).
2021-03-31 10:41:41 +11:00
Joel Challis
790f94533c
Refactor to use led config - Part 6 (#12115)
* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* revert changes
2021-03-10 22:48:18 +00:00
Joel Challis
f5a38b95c1
Remove legacy print backward compatiblitly (#11805)
* Remove legacy print backward compatiblitly

* Remove legacy print backward compatiblitly - core

* revert comment changes
2021-02-06 16:56:13 +00:00
Nick Brassel
9e18f41fcf Merge remote-tracking branch 'upstream/master' into develop 2021-01-20 10:00:28 +11:00
Ryan
1e1b469fa2
Remove DESCRIPTION, K-M (#11619) 2021-01-20 09:56:41 +11:00
Ryan
415d683ea7
Remove unused action_get_macro() usages in user files (#11165) 2021-01-11 01:25:45 -08:00
Zach White
c0dcee96a8
Initial list of keyboards to exclude from CI (#11213) 2020-12-21 15:38:39 +01:00
Joel Challis
23222625c2
Refactor to use led config - Part 5 (#10975)
* Refactor to use led config

* Refactor to use led config

* Refactor to use led config
2020-11-21 19:11:24 +00:00
Rich Saunders
dc40f00aaf
[Keymap] Corrected the dvorak layout for kinesis advantage (#10808) 2020-11-01 17:25:50 -08:00
Erovia
ad86894ae7
Rename keyboard-level readmes to lower-case (#10759)
This is the recommendation in the [PR
Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it
will make working with them easier in the CLI/API/etc.
2020-10-25 15:23:42 +00:00
Viet Yen Nguyen
194dc0984e
[Keyboard] Kinesis + Pro Micro (#9944)
* [Keyboard] Kinesis + Pro Micro init

- docs for DIY
- custom matrix = lite
- a near-factory dvorak mapping
- optimized debouncing for lower latency

* chore: reformatting

* chore: update doc

* chore: cleanups according to PR feedback

* chore: PR feedback

* fix: compile error

* chore: add include

* fix: LEDs hanging after USB disconnect

* chore: enable QMK goodies by default

* chore: use semantic write pin
2020-08-16 18:37:42 -07:00
Michael Stapelberg
5cbac94d08
[Keyboard] add support for the kinT kinesis keyboard controller (kint2pp variant) (#9687)
* branch keyboards/kinesis/kint2pp from keyboards/kinesis/stapelberg

Changes will be made in the next commit

* [Keyboard] update wiring for kinT (kint2pp variant)

* add QMK plumbing

* Apply zvecr’s suggestions from code review

* Update keyboards/kinesis/kint2pp/config.h

* Update keyboards/kinesis/kint2pp/config.h

* remove superfluous config.h include
2020-07-27 11:44:05 -07:00
James Young
fced377ac0
2020 May 30 Breaking Changes Update (#9215)
* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 13:14:59 -07:00
Xyverz
cf3913cd79
[Keymap] Xyverz Kinesis keymap update (#9018)
* Mitor Tweaks

Updating Dvorak keymap to change location of Slash and Backslash
to positions more in line with my 12x5 and similar ortho layouts

* Fixed readme.md

Tidied up the readme and make some minor changes.

* Adding atreus config file

Adding a config file for my Atreus keyboard. This is to help with
the keychatter issues I've been having on my Atreus.

* Changes as requested per @zvecr

Added `#pragma once` to beginning of config.h file as requested
by @zvecr.
2020-05-06 22:14:28 +01:00
James Young
26eef35f07
2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
ridingqwerty
0f7d294ac3
Remove filesize changes from default-ish rules.mk files, sans handwired (#8040) 2020-01-30 13:47:48 -05:00
Xyverz
b69457a192 More minor tweaks. (#7813)
Made the MACLOCK key easier tu use by putting it on right thumb
cluster as well.
2020-01-08 08:54:08 +11:00
Joel Challis
dcb7ca3f79
Move some common matrix code to a common location (#7699)
* Move some common matrix code to a common location

* Refactor some 'custom_matrix_helper' logic to use custom matrix lite

* Fix build for kinesis/stapelberg - abuse of vpath was picking up matrix.c from core when custom matrix was enabled

* Add validation for CUSTOM_MATRIX
2020-01-04 20:29:44 +00:00
Xyverz
45482d612c Update Kinesis keymap (#7741)
* Update Kinesis keymap

Added a MACLOCK macro to lock my mac easier

* Updated readme.md
2020-01-02 15:01:37 +11:00
Xyverz
f19c8b2d5d [Keymap] Updating keymaps (#7170)
* Added WOW layer

* Initial commit for this branch. Still a work in progress.

* Added Rorschach keyboard layout.

* Simplified keymap

Removed the media layer to help simplify things. Also corrected some
keymap mistakes in the Qwerty and Colemak layers.

* Added ErgoTravel keymap.

* reverted to previous layout.

* Added Sol keyboard layout.

* Minor changes to keymap.

* more changes

* Added sol graphic by Kagerufu and Cardiactuna

* Added colemak layer because I can.

* more changes to sol layout

* Streamlined Sol layout

* minor tweaks to sol layout

* further revisions to sol keymap.

* Removing deprecated #include statements from my keymaps

* Standardizing keymap `include` lines.

* Minor change to keymap.

Swapped ESC with GRV on all alpha layers.

* Tweaks to Atreus62 Keymap

Added a layer for FPS RPG Loot Shooters.

* Fixed readme.md for Atreus keymap.

Replaced "Keymap" with "Layer" in illustrations for continuity's sake

* More readme.md clean-up

More clarification in the Atreus readme file.

* Next verse, same as the first.

* Changes to Sol layout

Bringing my Sol layout more in line with my other Orthos.

* Fixed keymap GUI.

Replaced left-hand "RGUI" with "LGUI" on all layers as it should be.

* Added ALPS64 keymap

* Formatting corrections

* fixes to config.h and keymap.c

* Fixed errors

This commit fixes a pathing issue in keyboards/orthodox/keymaps/xyverz/config.h
and removes an stupid comma at the end of each LAYOUT stanza in
keyboards/rgbkb/sol/keymaps/xyverz/keymap.c left there by me.

* Fixed orthodox keymap config.h file

I hope this one fixes the problem. *sigh*

* Making suggested changes for PR#6192

Thanks to noroadsleft, fauxpark, and drashna. Still have
more work to do, but at least these suggestions have been applied.

* Fixing build errors

Travis has shown me the error of my ways...

* More fixes and corrections

Those pesky semicolons...

* More Fixes.

* Removing unneeded code snippet.

* fixed omitted semicolons

* Code updates to my keymaps

Updating the code for my Iris, Atreus62, and Atreus keymaps.

* Fixed Atreus62 Keymap

I forgot to add in the aliases for LOWER, RAISE, and ADJUST.

* Added userspace

Also made changes to Atreus62 Keymap to turn the red LEDs off on the ProMicro

* Fixing code that disables LEDs on ProMicros
Also tidied up my ErgoTravel keymap.

* Moving userspace to new branch

Moving my userspace to a new branch for the sake of keeping things
clean on the master branch.

* Added F13-F15 to Atreus62 Layout.

* Update readme.md.

* Updated Phantom keymap to current keymap standards

* Phantom keymap updates

Further updates - tidying and removing cruft.
Thank you zvecr on Discord for the help!

* Standards Updates

Bringing my Kinesis keymap up to current code standards

* Adding a readme

* Bring GH60 code to standard

* Utilizing layouts for 60_ansi and tkl_ansi

Moving my GH60 and Phantom keymaps into layouts/community/

* Alps64 layout removal

Removing my Alps64 keymap now that I've setup my 60_ansi layout.

* Moved Clueboard layout to community/66_ansi.

* Additions to 66_ansi config.h

* Bringing keymaps up to standard.

* More updates to keymaps.

* Syntax updates

* Revert "Syntax updates"

This reverts commit a892b2d9fc.

* Moved WIP keymaps

Moved my WIP keymaps to my wip_keymaps branch to keep my master clean

* Updates requested by noroadsleft

* more changes per noroadsleft

More fixes as requested by noroadsleft. Further tidy-up and
standardization of my keymap code.
2019-10-28 16:09:01 -07:00
fauxpark
2ee961c9e8 Cleanup rules.mk for 32U4 keyboards, I-K (#7097)
* Cleanup rules.mk for 32U4 keyboards, I-K

* Clean up ivy rules.mk
2019-10-21 21:43:18 -07:00
jlquinn
ea96c4b787 [Keyboard] Update Stapelberg readme.md (#5557)
Previously suggested parts are hard to find or non-existent.  Update with available part numbers.
2019-09-20 23:59:16 -07:00
fauxpark
f34299efd7 Cleanup rules.mk for USB64 and USB128 keyboards (#6769) 2019-09-19 09:55:03 -07:00
Daniel Schindler
a8647f0d27 Add model01 keymap. Change kinesis keeymap. 2019-07-16 15:02:48 -07:00
fauxpark
ba42a5ae68 Remove commented out MCUs in rules.mk (#5884) 2019-07-16 00:26:38 -07:00
fauxpark
f14629ed1c Remove/migrate action_get_macro()s from default keymaps (#5625)
* Remove/migrate action_get_macro()s from default keymaps

* Leave these breaks alone
2019-07-15 23:04:02 -07:00