Commit graph

155 commits

Author SHA1 Message Date
Drashna Jaelre
58a5030661
[Keymap] Drashna's Improve OLEDs and custom Split code (#14063)
* Fill the oleds with right mods

* Enable double mods on x32 oleds

* Disable forced NKRO

* Make oleds fancy only on good MCUs

* Overhaul oled display

* Further enhance oled, with kitty!

* Final oled form

* Not working transport

* Transport id of woring

* Add acceleration

* fix button placement for accel macro

* Fix accelartion location and behavior

* Remove OLED sync code

* Fix alignment issue

* Remove audio hack

* Fix up zima keymap

* Add matrix slave scan function and cleanup drashna.h

* Clean up user space

* Allow userspace sync to be disable-able

* Fix weird issue with audio

* Fix alignment issue with user split sync

* Disable second rgb matrix task

* Disable additional animations

* Change dynamic keymap settings

* Hacky fix for borked corne

* Add Blackpill (F411) support to tractyl manuform

* remove manual via eeprom reset

* Remove all references to rgblight twinkle

* Fix issues with config processing
2021-08-21 13:34:44 -07:00
QMK Bot
e80772da40 Merge remote-tracking branch 'origin/master' into develop 2021-08-14 01:15:07 +00:00
Joshua T
ade989962a
[Keymap] clean up userspace, add XD75 / Keyboardio Atreus (#13121)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-08-13 18:14:21 -07:00
Drashna Jael're
8e8ec6338c
Merge remote-tracking branch 'origin/master' into develop 2021-08-12 09:18:18 -07:00
Jacob Jerrell
30843f8329
[Keymap] JJerrell - Add Userspace and ZSA Keyboard Keymaps (#13548) 2021-08-12 07:44:15 -07:00
James Young
7bec943043
Merge remote-tracking branch 'upstream/master' into develop
Fixes merge conflicts in:

- keyboards/bm40hsrgb/config.h
  - Conflict from PR 13132:
    - RGB_DISABLE_WHEN_USB_SUSPENDED signature updated in develop branch, unmodified in master branch
    - updated file with changes from master branch

- keyboards/keebio/iris/keymaps/nstickney/keymap.c
  - Conflict from PR 11456:
    - layer_state_set_user() updated in develop branch, removed in master branch
    - updated file with changes from master branch
2021-08-09 12:14:22 -07:00
Joel Challis
c0628c2820
Remove backwards compatibility of debounce names (#13877)
* Remove backwards compatibility of debounce names

* Update docs

* Update keyboards/keymaps
2021-08-09 19:46:18 +01:00
Stick
5a59363e28
[User] changes to nstickney's keymaps (#11456)
0) Built a Bastyl, gave away the ErgoDoxEZ
1) UNICODEMAP
2) Iris left is now Elite-C
3) New QMK flashing instructions
2021-08-09 10:34:36 -07:00
James Young
a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
Drashna Jaelre
eb46c954dc
[Keymap] Drashna's Defaults cleanup (#13722) 2021-07-26 17:59:49 -07:00
Xelus22
b73a29aaea
[Bug] Develop - Change uint32_t to layer_state_t (#13596)
* fix sat75

* update uint32_t to layer_state
2021-07-19 09:50:55 -07:00
Ryan
fd8628ccdc
Migrate more fn_actions stuff (#13502) 2021-07-15 03:52:45 +10:00
Ryan
50d4dfd2e6
keymap_extras: Remove deprecated defines (#12949) 2021-07-06 09:05:11 +10:00
QMK Bot
55837093d5 Merge remote-tracking branch 'origin/master' into develop 2021-07-03 16:09:35 +00:00
Manna Harbour
65f8da3034
[Keymap] Update Miryoku (#13307)
Fix reddit link

Duplicate open parenthesis next to close parenthesis on NSSL

Add customisation instructions

Add lily58

Add gergo
Co-authored-by: Jonathan Dayton <jonathandayton23@gmail.com>

Clean up LAYOUT macro formatting

Add alternative vi-style navigation layout

Add kyria

Add minidox

Change order of keyboards

Add iris

Expand TOC

Re-order userspace subheadings

Add atreus

Add customisation section

Add split_3x5_3 and split_3x6_3 layouts

Add for_science

Fix wrong paths in keyboard config.h and keymap.c headings

Fix keyboard ordering

Fix blank lines around headings

Add compatibility with new org-mode version.

Remove keyboards/crkbd now covered by layouts/split_3x6_3

Add Halmak

Alphabetise alternative alpha arrangements

Move build options out of base layer alphas headings

Add list of keyboards supporting split_3x5_3 layout

Enable Auto Shift and Retro Shift

Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)

Change kyria thumb key mapping

Add planck_mit layout

Remove alternative bottom row support from ortho_4x12

Remove minidox
 - Covered by split_3x5_3 layout

Add moonlander

Remove KC_ macros

Add 60_ansi layout

Add ortho_5x15 layout
Closes manna-harbour/qmk_firmware#5
Co-authored-by: Rob <rob@debank.tv>

Fix typo (manna-harbour/qmk_firmware#7)
Author: sonnius <sonnius@users.noreply.github.com>

Add redox_w (manna-harbour/qmk_firmware#8)
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>

Add AUTO_SHIFT_NO_SETUP to reduce firmware size

Update image paths

Add instructions to checkout development branch

Add kyria extended thumbs option, change default, add KLE

Change clipboard keys
 - Change order to be mirror of windows bindings
 - Change default to use CUA bindings for Cut, Copy, and Paste, and Fun Cluster
bindings for Undo and Redo
 - Add alternative bindings
   - Fun Cluster (original miryoku bindings)
   - Mac
   - Windows
 - Change prefix for local macros from X_ to U_

Disable Retro Shift, enable Auto Shift for non-alphas

Revert "Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)"

Add Experimental Features section

Update miryoku image link

Update cover image link

Add dactyl_manuform/4x5

Add cutomisation examples

Add https to remote example

Fix dactyl_manuform/4x5 subset mapping

Add extended thumbs to ortho_4x12

Update Colemak Mod-DH naming
Closes manna-harbour/qmk_firmware#13

Add dactyl_manuform/5x6
Resolves manna-harbour/qmk_firmware#14
Co-authored-by: Sebastian Morales <sebastian.moralesd@gmail.com>

Add note on FORCE_LAYOUT
 - Needed to use EXTENDED_THUMBS on planck

Add parent directories to keyboard headings and re-order

Add keyboardio/atreus
Resolves manna-harbour/qmk_firmware#15

Add torn
Resolves manna-harbour/qmk_firmware#16
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>

Change map to zip
 - Adds support for python3, still compatible with python2.
Resolves manna-harbour/qmk_firmware#10
Resolves manna-harbour/qmk_firmware#19
Co-authored-by: Ori <ori@oribarbut.com>

Add python-version

Add sofle

Add ergotravel

Add ortho_5x12

Add ortho_4x10

Add :main no header argument to C code blocks
resolves manna-harbour/qmk_firmware#11
resolves manna-harbour/qmk_firmware#12
Co-authored-by: RubioJr9 <u0893472@utah.edu>

Add flipped layers and inverted-T nav alternative layouts
 - Separate tap_table into alphas_table and thumbs_table
 - Add mode argument to table-layout-half
 - Remove layer_name
 - Rename layers
 - Add mods and clipboard to MBO and mirror
 - Add MIRYOKU_LAYERS=FLIP
 - Add MIRYOKU_NAV=INVERTEDT

Add layer diagrams

Update contact section

Update links for Bilateral Combinations and Retro Shift

Add description and no reverse angle option to 60_ansi layout

Update list of keyboards supporting community layouts
 - and example build command lines

Change moonlander thumb keys

Update list of keyboards supporting split_3x5_3

Add license to tangled C source files
2021-07-03 09:09:02 -07:00
Drashna Jaelre
b7cf9a888a
Drashna's split updates (#13350)
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-01 00:42:32 -07:00
Drashna Jaelre
6901411bca
Move optical sensor code to drivers folder (#13044) 2021-06-21 21:00:11 +01:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Drashna Jaelre
f461adbd1d
[Keymap] Update to Drashna keymap and user code (based on develop) (#12936) 2021-05-25 09:24:01 -07:00
James Young
a8d64c8b89
Change BOOTMAGIC_ENABLE=yes to use Bootmagic Lite (#12172) 2021-04-12 21:18:52 +02:00
Ryan
88dce24375
Remove hex_to_keycode and move tap_random_base64 to send_string.c (#12079) 2021-03-12 18:03:44 +11:00
Drashna Jael're
146b042514
Merge remote-tracking branch 'origin/master' into develop 2021-02-23 13:57:26 -08:00
Drashna Jaelre
0b69e4df81
[Keymap] Drashna Updates - Split+OLED edition (#11968) 2021-02-23 10:57:24 -08:00
Joel Challis
a07c2a1377
Remove QMK_KEYBOARD_CONFIG_H (#11576) 2021-01-22 19:32:10 +00:00
QMK Bot
b58d164504 Merge remote-tracking branch 'origin/master' into develop 2021-01-22 16:23:41 +00:00
Drashna Jaelre
7a08b9d374
[Keymap] Cleanup and updating of drashna keymap code (#11516)
* Update other keyboards for rgb matrix changes

* Remove customized bootmagic code

* Fix corne layout compilation error

* Fix compiler errors with all keymaps

* Add Simple Visualizer for ergodox infinity

* Fix compile issue with Corne

* Fix keymap stuff

* Add alias for mouse layer

* Add Halmak Keyboard layout

* Updates for Kyria

* Add support for oled interval

* Change RGB stuff

[CHANGE] Fix coexistence issues

* Fix rgb_stuff

* Add custom ploopyco mouse keymap

* Decrease default dwell time

* Updates based on last breaking changes update

* Disable command on dactyl

* Update ergodox to use proper commands for rgb matrix indicators

* Update all rgb matrix indicator functions

* Update rules for dactyl-manuform

* Reduce wait time for mouse layer off event

* Add more info to logger

* Add wrappers for get_tapping term

* Move version.h include into only file that actually needs it

* Update rgb sleep stuff

* Update key print function

* Change DM keymap settings

* Change pin for DM Manuform

* Add Proton C stuff for Corne keymap

* more arm corne tinkering

* Even more arm stuff for corne

* Cleanup corne stuff

* redirect default keymap to drashna

because I am a very bad man

* change corne rgb priority

* Update tractyl manuform to not conflict

* Add more secret stuff

* more dactyl tweaks

* Add more options to split transport

* Changes of oled support

* Change split settings

* Improve keylogger formatting more

* tweak oled stuff

* Oled and such tweaks

* Reduce brightness due to leds

* Decrease brightness more

* Only run layer code if master
2021-01-22 08:23:03 -08:00
QMK Bot
b9ddccf035 Merge remote-tracking branch 'origin/master' into develop 2021-01-20 01:42:07 +00:00
Ryan
2cdc3699e1
Remove DESCRIPTION, W-Z (#11633) 2021-01-20 12:41:34 +11:00
Ryan
415d683ea7
Remove unused action_get_macro() usages in user files (#11165) 2021-01-11 01:25:45 -08:00
Jacob Jerrell
3076f86dc1
Bocaj - Third Annual Refactor (Redux) (#10295)
* Reset everything to upstream, reapply Bocaj changes

* Bocaj - address PR comments

* Just in time changes

* Bocaj - Several adjustments after using the layout for a while
2020-12-06 17:30:27 +11:00
Anand Babu (AB) Periasamy
67976da039
map reset key to the correct location (#11037)
Co-authored-by: Anand Babu (AB) Periasamy <twitter.com/abperiasamy>
2020-11-30 05:04:52 +11:00
Drashna Jaelre
855dd2d218
[Keymap] Drashna Code Cleanup (#10656)
* Add Launchpad keymap

Note: RGB and Audio won't work when using B pins for audio

* Add support for rgb matrix on launchpad

* Update config for launchpag

* Disable wait on layer change

* Update config for ErgoDox EZ

* Fixup rgb light userspace code

* Move Corne layout to community layouts folder

* Update config for corne to support community layouts

* Add license header to files

* Minor cleanup of userspace config

* Update Pimironi Trackball code

* Increase debounce time on ergodox

* Fix keymap handling

* Enable wait for USB for moonlander

* Update/add license headers

* fix review issues
2020-10-17 11:46:57 -07:00
Fred Silberberg
1aacbc44d1
[Keymap] Added 333fred 5x6_5 keymap (#10272)
* First pass at manuform layout.

* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.

* Use a 32-bit timer that can actually hit 5 minutes.

* Some updates after a day of usage:

* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.

* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.

* Revert osm on lgui as it makes start menu search impossible to use.

* Use LTO_ENABLE flag.

* License all of my (333fred's) keymaps as MIT.

* Update users/333fred/rgb.c

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-04 12:24:35 -07:00
Alpha Chen
d9fe855923
[Keymap] update kejadlen keymaps (#9954)
Standardizing my keymaps under my username, rather than a keymap name.
2020-08-18 19:21:50 -07:00
Manna Harbour
f0bde7906d
Update miryoku (#9442)
- Add mouse buttons overlay layer
- Change button order
- Remove crkbd hardware specifics
- Add alternative base layer alphas
- Change title
- Add logo
- Reword intro text
- Add dev branch and new commits links
- Replace manual toc and remove anchors
- Unindent lists
- Reduce headings
- Update docs
- Build keymap as object instead of including .c file
- Add kle subset mapping images
- Add alternative mapping support
- Change default mapping for ortho_4x12
- Add split mapping for ortho_4x12
- Add contact section
- Add #pragma once to layout and keyboard config.h
2020-06-22 22:30:05 -07:00
Drashna Jaelre
357a888d80
[Keymap] Drashna's Keymap Update - Display Edition (#9282)
OLED Display fixes
Add support for RGBLIGHT Layers
Add gaming layer to corn and kyria
RGBLight Startup Animation fixes and improvements (uses matrix_scan now!)
Pimoroni Trackball support added (IT'S RGB!!!)
Fix issues due to code changes
2020-06-15 03:41:28 -07:00
James Young
fced377ac0
2020 May 30 Breaking Changes Update (#9215)
* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 13:14:59 -07:00
Jonathan Arnett
ebc274209e
Update j3rn keymap (#9100) 2020-05-16 04:14:47 +10:00
Fred Silberberg
2dca087b04
Add naked60 layout, clean up my userspace files and rules.mk. (#8848) 2020-04-20 11:00:14 +01:00
Xyverz
0742f9fc96
Changes to my Ergodox & Planck keymaps (#8622)
* Changes to my Ergodox & Planck keymaps

* Fixed Typos

Corrected some typos and omissions to my Ergodox layout and readme

* Fixed Typos

Fixed some typos in my ErgoDox Readme and keymap.c files
2020-04-02 00:03:52 +01:00
Drashna Jaelre
c67e304593
[Keymap] Drashna's Cleanup and RGB Divide (#8506)
* Enable External EEPROM on Planck Rev6

* Update KC_MAKE macro to use qmk cli util

* Disable additional gradients for rgb matrix

* Update analog code for newer methods

* Update ergodox layout

* Disable Grave Escape

* Cleanup OLED code a bit

* Remove old unicode code

* Seperate RGB Matrix code from RGB Light code in userspace

* Massive overhaul an generalization of personal OLED code

Now lets hope I NEVER get a keyboard using a 128x32 in a normal orientation.

* Super tiny cleanup

* Enable Diablo layer on kyria

* clang format pass

* Additional OLED cleanup
2020-03-31 16:26:43 -07:00
James Young
26eef35f07
2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
Morton Jonuschat
806cd392e7
[osx_neo2] Bugfixes and improvements to Ergodox macOS Neo2 keymap (#8154)
* Use TAPPING_TERM constant (and redefine value to 200ms)
* change TAPPING_TOGGLE to 2 to require two taps to lock in layer 4
* add support for Shift-Command 3/4/5 key combinations that are used in
  macOS Catalina
* avoid false positive tap detecion for RMOD3 when the whole sequence of
  pressing RMOD3, tapping another key and releasing RMOD3 took less than
  TAPPING_TERM milliseconds.
* replace SEND_STRING with tap_code()/tap_code16(), saving ~860 bytes in
  compiled firmware size.
2020-02-14 03:30:32 +00:00
Drashna Jaelre
00d3061e02 [Keymap] Cleanup of Drashna code (#7800)
* ifdef rgb stuff like a madman for RGB Coexistance

* Re-enable RGB Light on Planck

* fix RGB Coexistance issue

* Tweak feature settings for Ergodox EZ Glow

* Their powers combine, and I am Captain RGB

This one is for noroadsleft and yan.

* Limit brightness when both RGB features are enabled

* Change shutdown method

* Add RGB Coexistience stuff to keymap

* disable RGBLIGHT_SLEEP until a solution can be found

* Disable Unicode on the kyria

* Fix up Iris rev defines

* Fix up community layouts to compile properly

* Cleanup rgb stuff

* Merge ergodox keymaps

* Update CCCV macro to use tap_code16

* Enable Solenoid on C39

Because josh couldn't

* Enable RGB Light, not Matrix on rev6 keymap

* Only enable LTO on non-ARM boards

* Clean up Bootmagic OLED display

* Enable RGBLIGHT_SPLIT on kyria

Not that it does anything

* Add hotkey for discord
2020-01-06 01:49:48 -08:00
Manna Harbour
3d78e6078e [Keymap] Display logo for caps lock indication on crkbd using old OLED driver (#7535)
* Display logo for caps lock indication on crkbd using old OLED driver

* Add emacs read-only mode file variable to generated files

* use LTO_ENABLE instead of EXTRAFLAGS

This enables the same option, and disables action_macros, and action_functions, both of which seem to break when LTO is enabled. And this is a lot simpler to use.

Co-Authored-By: Drashna Jaelre <drashna@live.com>
2019-12-07 23:08:12 -08:00
Drashna Jaelre
eb91c96288
[Keymap] All about (ARM) RGB and OLEDs (drashna keymaps) (#7354)
* Add Kyria Keymap

* Enable all RGBLIGHT Animations for ARM and high capacity AVR

* Reduce GNUC version for __has_include

* Cleanup Ortho 4x12 Community layout

* Update Collide 39 keymap

* Cleanup Keymaps

* Enable full 30 LEDs for Ergodox

* Change EEPROM Load timing

* Use RGB Matrix on Planck Rev6

* Use correct keymap swap

* Enable everything for ARM

* Only enable rgb sleep on avr until crash is fixed

* Add additional Kyria keymap config

* Overhaul Kyria OLED display

* Improve kyria keymap based on usage

* Minor tweaks to rules

* Update OLED code to truncate properly

* Fix RGB Light layer indication

* Switch all of biton32 to get_highest_layer function

* Fix OLED Keylogger display

* Run qmk cformat over all of my user files

* Slight tweak to kyria based on usage

* Move around LALT_T config

* Add comments about base wrappers to keymaps

* Another cformat pass

* Temp fix for VUSB boards and NKRO

* Convert tabs to spaces in rules.mk files

* Only enable RGBLight if it's enabled

* Add Encoder Flip setting

* Update OLED font file
2019-11-20 12:37:24 -08:00
Campbell Barton
8725f37de7 [Keymap] Update to qwerty_code_friendly (#7416)
- Move space to thumb cluster.
- Make L1 and L2 symmetrical.
- Add App & Menu keys.
2019-11-19 21:17:08 -08:00
Ivan Smirnov
2b30776dd0 [Keymap] Add issmirnov {user, ergodox, levinson} files. (#7239)
* Add issmirnov {user, ergodox, levinson} files.

There are enough interesting QMK tricks in these layouts that it seems
worth it to share with the broader community. Big thanks to Drashna for
inspiration, as well as all the wonderful creators of QMK documentation.

Some highlights:
- Common layout shared between levinson and ergodox_ez
- TAP_TOG macro for fast layer switching
- Autogenerated keymaps ascii art with git hooks

I will do my best to do periodic rolls here, but the source of truth
will always be https://github.com/issmirnov/qmk-keebs

* Incorporate review feedback.

- Remove CLEAR_EEPROM in favor of built in EEP_RST
- Remove custom handlers for audio on bootup and shutdown
- Remove plethora of unneeded includes
- Remove deprecated and dupliated config options

HUGE thanks to drashna for the review!

* Apply suggestions from code review

Huge thanks to drashna@ for a very thorough review and the very useful suggestions.

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Remove unclear optimization

This was an artifact from some other keymap I saw.
2019-11-08 19:17:21 -08:00
Drashna Jaelre
e3a21348c3
[Keymap] Drashna's Hardware Features Experimentations (#6920)
* Change RGBLight pin for Planck Light

Move it to A0, so that the SPI? pins are available for BT hackery

* Add QMK DFU bootloader info

* Add Solenoid

* Disable annoying white LED on bottom

* Enable Solenoid on Corne

* Remove bounds for animations

* Increase debounce for Ergodox EZ to reduce repeat key issues

* Set swap hands key to be a hold-tap key

This way, it's not ANNOYING and doesn't swap the hands inteniontally

* Move MT Alt in Corne keymap

* Re-Add fine tuned control of secrets

* Squash mods to single row

* Add LRA settings to haptic feedback settings for Rev6

* Fix issue with non-Planck EZ keymaps

* Add 40 Percent Nano with Analog Joystick

* Add Collide39 keymap

* Fix OLED printing to be more flavorful

* Fix up Iris GamePad and come cleanup

* Expand OLED char map further

* Add modded characters to keylogger

* Here be dragons

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Fix up rules for community layouts

* Some more OLED tweaks

* Add mod mask check function

* Change QMK DFU Audio pin to be correct

* Use manual STM config instead of CTPC for Collide 39
2019-10-16 13:11:22 -07:00
Drashna Jaelre
e88f80a891
[Keymap] Big Drashna code update (#6639)
* Add a quefrency keymap

* New Alt-ernate layouts

* Enable Per Key Tapping Term to preserve sanity

* Use underglow and mod lights for status on Corne

* Update the drashna_ms keymap for quefrency

* Disable Audio since there isn't enough space

* Update KC_MAKE to ues :flash target

* Cleanup ergodox layout

* Enable i2c support for Iris

* Add keymap support for CG_SWAP

* Enable RGB Matrix Shutdown mode

* enable heatmap

* Update gitlab CI to install python3

* Remove game macros

These are no longer needed, and haven't been used in ages

* Cleanup planck layout

* Add RGB Matrix fun and RGB cleanup

* Add keycode and config for RGB Matrix idle animations

* Clean up rgb idle animation code

* Add rgb idle keycode to keymaps

* Fix issues with rgb matrix idle animation

* Fix some handling for idle animation

* Reduce idle animation timeout to 15s to be more reasonable

* fix up rgb stuff

* Fix isses with rgb functions not being called for matrix

* Use custom EEPROM Magic Number so testing is easier

* Extend Default Layer macro to support a lot more layers

* Fix bjohnson macropad

* Adjust KC_MAKE to process mods for more consistent behavior

* Fix up rgb stuff on corne

* Corne OLED Overhaul

* Fixes a number of issues with weirdness.
* Fixes issues with keylogger (should be more reliable now)
* Modulaize the OLED render sections
* Rewrite layer display code
* Update URL for Font Editor

Due to odd issues, I ended up rewriting from scratch.  And using PROGMEM versions, since I think I was getting memory overflows.

* Update polling rate on all keebs

* Fix planck ez layout config

* Remove macros from Viterbi
2019-09-07 08:57:30 -07:00