qmk_firmware/keyboards/bastardkb/dilemma/dilemma.h

110 lines
3.5 KiB
C

/**
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#ifdef POINTING_DEVICE_ENABLE
# ifndef NO_DILEMMA_KEYCODES
enum dilemma_keycodes {
POINTER_DEFAULT_DPI_FORWARD = QK_KB_0,
POINTER_DEFAULT_DPI_REVERSE,
POINTER_SNIPING_DPI_FORWARD,
POINTER_SNIPING_DPI_REVERSE,
SNIPING_MODE,
SNIPING_MODE_TOGGLE,
DRAGSCROLL_MODE,
DRAGSCROLL_MODE_TOGGLE,
};
# define DPI_MOD POINTER_DEFAULT_DPI_FORWARD
# define DPI_RMOD POINTER_DEFAULT_DPI_REVERSE
# define S_D_MOD POINTER_SNIPING_DPI_FORWARD
# define S_D_RMOD POINTER_SNIPING_DPI_REVERSE
# define SNIPING SNIPING_MODE
# define SNP_TOG SNIPING_MODE_TOGGLE
# define DRGSCRL DRAGSCROLL_MODE
# define DRG_TOG DRAGSCROLL_MODE_TOGGLE
# endif // !NO_DILEMMA_KEYCODES
/** \brief Return the current DPI value for the pointer's default mode. */
uint16_t dilemma_get_pointer_default_dpi(void);
/**
* \brief Update the pointer's default DPI to the next or previous step.
*
* Increases the DPI value if `forward` is `true`, decreases it otherwise.
* The increment/decrement steps are equal to DILEMMA_DEFAULT_DPI_CONFIG_STEP.
*
* The new value is persisted in EEPROM.
*/
void dilemma_cycle_pointer_default_dpi(bool forward);
/**
* \brief Same as `dilemma_cycle_pointer_default_dpi`, but do not write to
* EEPROM.
*
* This means that reseting the board will revert the value to the last
* persisted one.
*/
void dilemma_cycle_pointer_default_dpi_noeeprom(bool forward);
/** \brief Return the current DPI value for the pointer's sniper-mode. */
uint16_t dilemma_get_pointer_sniping_dpi(void);
/**
* \brief Update the pointer's sniper-mode DPI to the next or previous step.
*
* Increases the DPI value if `forward` is `true`, decreases it otherwise.
* The increment/decrement steps are equal to DILEMMA_SNIPING_DPI_CONFIG_STEP.
*
* The new value is persisted in EEPROM.
*/
void dilemma_cycle_pointer_sniping_dpi(bool forward);
/**
* \brief Same as `dilemma_cycle_pointer_sniping_dpi`, but do not write to
* EEPROM.
*
* This means that reseting the board will revert the value to the last
* persisted one.
*/
void dilemma_cycle_pointer_sniping_dpi_noeeprom(bool forward);
/** \brief Whether sniper-mode is enabled. */
bool dilemma_get_pointer_sniping_enabled(void);
/**
* \brief Enable/disable sniper mode.
*
* When sniper mode is enabled the dpi is reduced to slow down the pointer for
* more accurate movements.
*/
void dilemma_set_pointer_sniping_enabled(bool enable);
/** \brief Whether drag-scroll is enabled. */
bool dilemma_get_pointer_dragscroll_enabled(void);
/**
* \brief Enable/disable drag-scroll mode.
*
* When drag-scroll mode is enabled, horizontal and vertical pointer movements
* are translated into horizontal and vertical scroll movements.
*/
void dilemma_set_pointer_dragscroll_enabled(bool enable);
#endif // POINTING_DEVICE_ENABLE