qmk_firmware/keyboards/controllerworks/mini36
2024-04-16 02:16:08 +01:00
..
keymaps Rename RGB_DISABLE_WHEN_USB_SUSPENDED -> RGB_MATRIX_SLEEP (#22682) 2023-12-20 13:31:50 +11:00
config.h Migrate RGB Matrix config to info.json - C (#22807) 2024-01-04 06:00:47 +00:00
halconf.h Fixup ChibiOS header inclusion search ordering. (#19623) 2023-01-19 01:05:29 +00:00
keyboard.json Migrate build target markers to keyboard.json - E (#23529) 2024-04-16 02:16:08 +01:00
mcuconf.h Fixup ChibiOS header inclusion search ordering. (#19623) 2023-01-19 01:05:29 +00:00
mini36.c Add mini36 (#18739) 2022-10-22 23:56:38 +01:00
readme.md Add mini36 (#18739) 2022-10-22 23:56:38 +01:00
rules.mk OLED: driver naming cleanups (#21710) 2023-08-15 10:30:34 +01:00

mini36

mini36 mini36PCB

A pre-built, low profile, split mechanical keyboard with 36 keys based on the RP2040 processor

Make example for this keyboard (after setting up your build environment):

    make controllerworks/mini36:default

Flashing example for this keyboard:

    make controllerworks/mini36:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Features

  • Highly integrated design with microcontroller, USB and TRRS connectors, and OLED all integrated on the main board with no secondary modules
  • RP2040 processor by Raspberry Pi Foundation running at 130 MHz with 16MB flash memory
  • CNC milled aluminum case with only 8mm thickness
  • "PCB art" shine through back plate with gold surface finish
  • 128x32 OLED on each keyboard half
  • 36 per-key RGB LEDs and 12 backlight RGB LEDS are individually addressable
  • ESD and over-current protection on USB and TRRS connectors
  • Reset and boot tactile switches
  • USB C host connection
  • Hot swap connectors for Kailh Chocolate PG1350 switches
  • Chocolate key spacing (18mm horizontal x 17mm vertical)

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the upper left key on the left hand keyboard half or the upper right key on the right hand keyboard half while plugging in USB
  • Physical reset button: Press the RST button twice, rapidly
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available