alterNERDtive/qmk_firmware
1
0
Fork 0
Code Pull requests Activity
qmk_firmware/keyboards/handwired/riblee_split
History
Ryan 5fda349018
Remove RGB keycodes from boards with no RGB config (#23709)
2024-05-20 17:11:49 +10:00
..
keymaps/default Remove RGB keycodes from boards with no RGB config (#23709) 2024-05-20 17:11:49 +10:00
config.h Add riblee handwired split keyboard (#22277) 2023-11-08 00:31:06 -08:00
halconf.h Add riblee handwired split keyboard (#22277) 2023-11-08 00:31:06 -08:00
keyboard.json Migrate build target markers to keyboard.json - HI (#23540) 2024-04-17 02:49:17 +01:00
mcuconf.h Add riblee handwired split keyboard (#22277) 2023-11-08 00:31:06 -08:00
readme.md Add riblee handwired split keyboard (#22277) 2023-11-08 00:31:06 -08:00
rules.mk Add riblee handwired split keyboard (#22277) 2023-11-08 00:31:06 -08:00

readme.md

Handwired Split

This is a compact (12x5) ortholinear split keyboard.

  • Keyboard Maintainer: Daniel Reibl
  • Hardware Supported: STM32F411 BlackPill

Make example for this keyboard (after setting up your build environment):

make handwired/riblee_split:default

Flashing example for this keyboard:

make handwired/riblee_split:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available