alterNERDtive/qmk_firmware
1
0
Fork 0
Code Pull requests Activity
qmk_firmware/keyboards/hineybush/h101
History
Ryan 1184e0d9be
Adjust keycode alignment around QK_BOOT (#23697)
2024-05-11 16:50:48 +01:00
..
keymaps Adjust keycode alignment around QK_BOOT (#23697) 2024-05-11 16:50:48 +01:00
keyboard.json Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
matrix_diagram.md add matrix diagram for hineybush/h101 (#22252) 2024-01-31 18:23:02 -08:00
readme.md [Keyboard] Hineybush H101 (#22186) 2023-10-11 14:09:17 -07:00

readme.md

h101

h101

F13 full-size PCB with 1.25u function row Spacing.

  • Keyboard Maintainer: hineybush
  • Hardware Supported: h101 using STM32F072
  • Hardware Availability: Fossil by Carolina Mech

Make example for this keyboard (after setting up your build environment):

make hineybush/h101:default

Flashing example for this keyboard:

make hineybush/h101:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available