alterNERDtive/qmk_firmware
1
0
Fork 0
Code Pull requests Activity
qmk_firmware/keyboards/plywrks/ahgase
History
James Young bfa05cc5e7
Migrate LOCKING_*_ENABLE to Data-Driven: P, Part 1 (#23779) 
Affects:

  - `p3d/eu_isolation`
  - `p3d/glitch`
  - `p3d/q4z`
  - `p3d/synapse`
  - `p3d/tw40`
  - `panc40`
  - `papercranekeyboards/gerald65`
  - `parallel/parallel_65/hotswap`
  - `parallel/parallel_65/soldered`
  - `pdxkbc`
  - `pearlboards/atlas`
  - `pearlboards/pandora`
  - `pearlboards/pearl`
  - `pearlboards/zeus`
  - `pearlboards/zeuspad`
  - `pegasus`
  - `phantom`
  - `phoenix`
  - `picolab/frusta_fundamental`
  - `pimentoso/paddino02/rev1`
  - `pimentoso/paddino02/rev2/left`
  - `pimentoso/paddino02/rev2/right`
  - `pisces`
  - `pizzakeyboards/pizza65`
  - `pkb65`
  - `planck`
  - `playkbtw/ca66`
  - `playkbtw/pk60`
  - `playkbtw/pk64rgb`
  - `pluckey`
  - `plume/plume65`
  - `plywrks/ahgase`
  - `plywrks/lune`
  - `pohjolaworks/louhi`
  - `polycarbdiet/s20`
  - `pom_keyboards/tnln95`
  - `portal_66/hotswap`
  - `portal_66/soldered`
  - `pos78`
2024-05-23 19:49:48 +01:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: P, Part 1 (#23779) 2024-05-23 19:49:48 +01:00
readme.md [Keyboard] Add plywrks Ahgase (#17191) 2022-05-22 23:11:17 -07:00

readme.md

Ahgase

Ahgase

Seamless F13 Blocker TKL

Mount: Double O-ring Gasket/Top Mount Front Height: 17.5mm Typing Angle: 6.9 Degrees

  • Keyboard Maintainer: Ramon Imbao
  • Hardware Supported: ATmega32u4

Make example for this keyboard (after setting up your build environment):

make plywrks/ahgase:via

To get to the bootloader, simply press the reset button located at the back of the PCB. You can then flash new firmware onto it.

Flashing example for this keyboard:

make plywrks/ahgase:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.