qmk_firmware/keyboards/rgbkb/mun/rev1
2024-05-20 17:11:49 +10:00
..
config.h Align RGBKB keyboards to current standards (#23663) 2024-05-11 13:11:50 +01:00
halconf.h Align RGBKB keyboards to current standards (#23663) 2024-05-11 13:11:50 +01:00
keyboard.json Remove RGB keycodes from boards with no RGB config (#23709) 2024-05-20 17:11:49 +10:00
mcuconf.h Align RGBKB keyboards to current standards (#23663) 2024-05-11 13:11:50 +01:00
readme.md Keyboards/RGBKB/Mün (#13239) 2021-06-25 22:00:21 -07:00
rev1.c Align RGBKB keyboards to current standards (#23663) 2024-05-11 13:11:50 +01:00
rev1.h Align RGBKB keyboards to current standards (#23663) 2024-05-11 13:11:50 +01:00
rules.mk Align RGBKB keyboards to current standards (#23663) 2024-05-11 13:11:50 +01:00

Mün

Mün

Mün is powered by STM32 with full QMK support. Each key has super-bright RGB backlighting and MX Kailh hotswap sockets. No soldering is required to get a fully functioning keyboard. There are an additional 14 rear-facing RGB LEDs on each side. Each half can be configured to run as master or slave with the two USB-C ports. They also support up to two rotary encoders and one OLED panel per half.

Keyboard Maintainer: Legonut
Hardware Supported: Mün PCB R1.0, R1.1, R1.2 Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/mun:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.