qmk_firmware/keyboards/shk9
James Young 8413411571
Migrate LOCKING_*_ENABLE to Data-Driven: S, Part 1 (#23783)
Affects:

  - `salicylic_acid3/7skb/rev1`
  - `salicylic_acid3/7splus`
  - `salicylic_acid3/ajisai74`
  - `salicylic_acid3/ergoarrows`
  - `salicylic_acid3/getta25/rev1`
  - `salicylic_acid3/jisplit89/rev1`
  - `salicylic_acid3/nafuda`
  - `salicylic_acid3/naked48/rev1`
  - `salicylic_acid3/naked60/rev1`
  - `salicylic_acid3/naked64/rev1`
  - `salicylic_acid3/nknl7en`
  - `salicylic_acid3/nknl7jp`
  - `salicylic_acid3/setta21/rev1`
  - `sandwich/keeb68`
  - `satt/vision`
  - `sauce/mild`
  - `scatter42`
  - `sck/gtm`
  - `sck/m0116b`
  - `sck/neiso`
  - `sekigon/grs_70ec`
  - `sendyyeah/pix`
  - `senselessclay/ck65`
  - `senselessclay/gos65`
  - `senselessclay/had60`
  - `sentraq/s60_x/default`
  - `sentraq/s60_x/rgb`
  - `sentraq/s65_plus`
  - `sentraq/s65_x`
  - `sets3n/kk980`
  - `shambles`
  - `shandoncodes/flygone60/rev3`
  - `shandoncodes/mino/hotswap`
  - `shapeshifter4060`
  - `shiro`
  - `shk9`
  - `sidderskb/majbritt/rev2`
  - `sixkeyboard`
  - `skeletonkbd/skeletonnumpad`
  - `skme/zeno`
2024-05-23 20:38:43 +01:00
..
keymaps [Keyboard] add shk9 macropad (#11505) 2021-02-05 03:31:15 -08:00
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: S, Part 1 (#23783) 2024-05-23 20:38:43 +01:00
readme.md [Keyboard] add shk9 macropad (#11505) 2021-02-05 03:31:15 -08:00

shk9

shk9

The SHK9 is a tiny 3x3 macropad! Fully configurable with via.

Make example for this keyboard (after setting up your build environment):

make shk9:default

Flashing example for this keyboard:

make shk9:default:flash

Bootloader Mode

To reset the board into bootloader mode, remove the pcb from the case buy removing keycaps, and unscrewing the 3 screws. Then (while plugged in) press the switch on the underside of the PCB for a few seconds. The board is now in bootloader mode.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.