qmk_firmware/keyboards/splitkb/kyria/rev1/config.h

89 lines
3.3 KiB
C

/*
Copyright 2022 Thomas Baart <thomas@splitkb.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* key matrix size */
/* Rows are doubled up */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
// wiring
#define MATRIX_ROW_PINS \
{ B4, E6, D7, D4 }
#define MATRIX_COL_PINS \
{ B6, B2, B3, B1, F7, F6, F5, F4 }
#define ENCODERS_PAD_A \
{ C6 }
#define ENCODERS_PAD_B \
{ B5 }
#define ENCODERS_PAD_A_RIGHT \
{ B5 }
#define ENCODERS_PAD_B_RIGHT \
{ C6 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#if defined(CONVERT_TO_PROTON_C)
# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve.
# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
# define SERIAL_USART_TX_PIN D3
# define SERIAL_USART_RX_PIN D2
# define RGB_DI_PIN PAL_LINE(GPIOA, 3)
# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
# define WS2812_PWM_CHANNEL 4 // default: 2
# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
#else
# define RGB_DI_PIN D3
# define SOFT_SERIAL_PIN D2
#endif
#define RGBLED_SPLIT \
{ 10, 10 }
#define RGBLED_NUM 20
#ifdef OLED_ENABLE
# define OLED_DISPLAY_128X64
# define SPLIT_OLED_ENABLE
#endif
/* RGB matrix support */
#ifdef RGB_MATRIX_ENABLE
# define SPLIT_TRANSPORT_MIRROR
# define RGB_MATRIX_LED_COUNT RGBLED_NUM // Number of LEDs
# define RGB_MATRIX_SPLIT { 10, 10 }
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
# define RGB_DISABLE_WHEN_USB_SUSPENDED
#endif