qmk_firmware/lib/lufa/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt

66 lines
1.7 KiB
Text

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Printer Host Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Printer Device</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Bidirectional Protocol</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Printer Class Specification \n
* PCL Language Specification</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Printer host demonstration application. This gives a simple reference
* application for implementing a USB Printer host, for USB printers using
* the bidirectional data encapsulation protocol and PCL language.
*
* Upon connection of a compatible printer, the printer's device ID is sent
* to the AVR's serial port, and a simple test page is printed using the PCL
* printer language.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/