qmk_firmware/keyboards/tmo50/tmo50.c
Joe Wasson 4a6cfb06c5
TMO50: use layer_state_set_kb at keyboard level (#10150)
* Change TMO to use layer_state_set_kb as is customary at the keyboard level.

This also factors out `process_indicator_led` to a separate method.
2020-08-31 22:19:51 -07:00

101 lines
2.5 KiB
C

/* Copyright 2019 funderburker
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "tmo50.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
DDRB |= (1 << PB0); //init B0
PORTB &= ~(1 << PB0); //turn on B0
DDRB |= (1 << PB1);
PORTB |= (1<<PB1); //turn off B1
DDRB |= (1 << PB2);
PORTB |= (1<<PB2);
DDRB |= (1 << PB3);
PORTB |= (1<<PB3);
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
layer_state_t layer_state_set_kb(layer_state_t state)
{
state = layer_state_set_user(state);
process_indicator_led_kb(state);
return state;
}
__attribute__((weak))
bool process_indicator_led_user(layer_state_t state){
return true;
}
bool process_indicator_led_kb(layer_state_t state)
{
if(process_indicator_led_user(state))
{
// if on layer 0, turn on B0 LED, otherwise off.
if (get_highest_layer(state) == 0) {
PORTB &= ~(1<<PB0);
} else {
PORTB |= (1<<PB0);
}
// if on layer 1, turn on B1 LED, otherwise off.
if (get_highest_layer(state) == 1) {
PORTB &= ~(1<<PB1);
} else {
PORTB |= (1<<PB1);
}
// if on layer 2, turn on B2 LED, otherwise off.
if (get_highest_layer(state) == 2) {
PORTB &= ~(1<<PB2);
} else {
PORTB |= (1<<PB2);
}
// if on layer 3, turn on B3 LED, otherwise off.
if (get_highest_layer(state) == 3) {
PORTB &= ~(1<<PB3);
} else {
PORTB |= (1<<PB3);
}
}
return true;
}