qmk_firmware/keyboards/planck/rev6_drop/config.h

126 lines
3.5 KiB
C

/*
* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define PRODUCT_ID 0xA4F9
#define DEVICE_VER 0x0006
#undef MANUFACTURER
#define MANUFACTURER Drop
#undef MATRIX_ROWS
#undef MATRIX_COLS
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 6
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
/* Note: These are not used for arm boards. They're here purely as documentation. */
#undef MATRIX_ROW_PINS
#undef MATRIX_COL_PINS
#define MATRIX_ROW_PINS \
{ A10, A9, A8, B15, C13, C14, C15, A2 }
#define MATRIX_COL_PINS \
{ B11, B10, B2, B1, A7, B0 }
#define UNUSED_PINS
#define ENCODERS_PAD_A \
{ B12 }
#define ENCODERS_PAD_B \
{ B13 }
#define DIP_SWITCH_PINS \
{ B14, A15, A0, B9 }
#define MUSIC_MAP
#undef AUDIO_VOICES
#undef AUDIO_PIN
#define AUDIO_PIN A5
#define AUDIO_PIN_ALT A4
#define AUDIO_PIN_ALT_AS_NEGATIVE
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
// #define DEBOUNCE 6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/*
* WS2812 Underglow Matrix options
*/
#define RGB_DI_PIN A1
#define RGBLED_NUM 9
#define DRIVER_LED_TOTAL RGBLED_NUM
#define WS2812_PWM_DRIVER PWMD2
#define WS2812_PWM_CHANNEL 2
#define WS2812_PWM_PAL_MODE 1
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2
#define WS2812_DMA_CHANNEL 2
#define RGB_DISABLE_WHEN_USB_SUSPENDED