3c58f98929
* PMW33XX drivers overhaul This combines the PMW3389 and PM3360 drivers as they only differ in the firmware blobs and CPI get and set functions. The following changes have been made: * PMW3389 now gets the same multi-sensor feature that is already available on the PMW3360. * Introduced a shared pmw33xx_report_t struct is now directly readable via SPI transactions instead of individual byte-sized reads, saving multiple copies and bitshift operations. * pmw33(89/60)_get_report functions had unreachable branches in their motion detection logic these have been simplied as much as possible. * The fast firmware upload option has been removed as this becomes obsolete by the newly introduced polled waiting functions for ChibiOS polled waiting * PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options have been removed as they don't need to be configurable. * All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix to reduce code duplication and make the defines interchangeable * Adjust keyboards to PMW33XX naming scheme |
||
|---|---|---|
| .. | ||
| 4x6_right | ||
| 5x6_right | ||
| config.h | ||
| info.json | ||
| post_config.h | ||
| readme.md | ||
| tractyl_manuform.c | ||
| tractyl_manuform.h | ||
Tractyl Manuform (4x6, 5x6)
the Dactyl-Manuform is a split curved keyboard based on the design of adereth dactyl and thumb cluster design of the manuform keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
- Keyboard Maintainer: drashna
- Hardware Supported: Teensy 2.0++, WeAct BlackPill F411
Make example for this keyboard (after setting up your build environment):
make handwired/tractyl_manuform/5x6_right/f411/drashna:default
Flashing example for this keyboard:
make handwired/tractyl_manuform/5x6_right/f411/drashna:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
RESETif it is available