qmk_firmware/keyboards/acheron/shark
Nick Brassel 416af0171c
Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353)
* Remove CORTEX_ENABLE_WFI_IDLE from the codebase.

* Turn on CORTEX_ENABLE_WFI_IDLE by default.
2023-06-23 20:31:25 +01:00
..
alpha Move ortho & numpad layouts to data driven (#20183) 2023-03-29 15:54:34 +11:00
beta Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 2023-06-23 20:31:25 +01:00
info.json Move keyboard USB IDs and strings to data driven, pass 2: 0-9, A (#17941) 2022-08-13 17:47:05 -07:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

SharkPCB QMK firmware

sharkpcb

The SharkPCB is an open-source ortholinear 40% layout designed by Gondolindrim for the AcheronProject.

  • Keyboard Maintainer: Gondolindrim
  • Hardware Availability: you can get release Beta SharkPCBs using the JLCPCB manufacturer using the files at its documentation

How to flash

Enter bootloader

Release Alpha:

The DFU state in the bootloader can be accessed in 2 ways:

  • Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the back of the PCB
  • Keycode in layout: press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Release Beta:

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the back of the PCB, for at least five seconds
  • Keycode in layout: press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

Release Alpha

After accessing the DFU state in your PCB, build the default layout using:

make acheron/shark/alpha:default

Release Beta

After accessing the DFU state in your PCB, build the default layout using:

make acheron/shark/beta:default

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.