qmk_firmware/keyboards/handwired/steamvan/rev1/config.h
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00

65 lines
1.8 KiB
C

/*
Copyright 2019 John M Daly <jmdaly@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0001
#define MANUFACTURER John M Daly
#define PRODUCT SteamVan rev1
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 12
/* ROWS: Top to bottom, COLS: Left to right
*/
#define MATRIX_ROW_PINS { A6, A5, A4, A3 }
#define MATRIX_COL_PINS { A9, A8, B15, B14, B13, A10, B9, B6, B5, B4, B3, A15 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* Backlight configuration
* Backlight LEDs on B8
*/
#define BACKLIGHT_PIN B8
#define BACKLIGHT_BREATHING
#define WS2812_SPI SPID1
#define WS2812_SPI_MOSI_PAL_MODE 5
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 16
#define RGB_DI_PIN A7
#define DRIVER_LED_TOTAL RGBLED_NUM
#define RGB_MATRIX_KEYPRESSES