qmk_firmware/keyboards/handwired/dactyl_manuform/dmote/62key/config.h
RJ Bernau db540e2832
Adding VIA support for Dactyl Manuform 5x7 (#9462)
* adding via support for Dactyl Manuform 5x7

* Changing Vendor ID from FEED to 444D (DM)

* Update keyboards/handwired/dactyl_manuform/4x6/config.h

Fixing typo in Dactyl Manuform 4x6 Product Id

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/handwired/dactyl_manuform/4x5/config.h

Fixing typo in Dactyl Manuform 4x5 Product Id

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Roland Bernau <roland@bernau.dev>
Co-authored-by: Joel Challis <git@zvecr.com>
2020-07-25 22:36:39 +01:00

52 lines
1.6 KiB
C

#pragma once
#include "config_common.h"
#define PRODUCT_ID 0x3632
#define DEVICE_VER 0x0001
#define PRODUCT DMOTE (62-key)
#define MATRIX_ROWS 12
#define MATRIX_COLS 6
// MCUs are flipped on each side, relative to the shape of the case,
// but for ease of mounting, the pinout is not flipped with the controller.
// The same finger on each hand uses a column connected to the pin with the
// same silk-screen label on each Pro Micro.
// Pin use:
//
// MCU | Silk | DMOTE
// -----+------+----------
// D3 | TX0 |
// D2 | RX1 |
// D1 | 2 | LED strip input (dominant half only)
// D0 | 3 | Serial interface between halves
// D4 | 4 | Outermost pinky-finger column
// C6 | 5 | Column
// D7 | 6 | Column
// E6 | 7 | Column
// B4 | 8 | Column
// B5 | 9 | Outermost index-finger column
// -----+------+----------
// F4 | A3 |
// F5 | A2 |
// F6 | A1 | Top row (furthest from user)
// F7 | A0 | Row
// B1 | 15 | Row
// B3 | 14 | Row
// B2 | 16 | Row
// B6 | 10 | Bottom row (closest to user)
#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
#define DIODE_DIRECTION COL2ROW
// WS2812 RGB LED, normally used to indicate keyboard state:
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
#define RGB_DI_PIN D1
#define RGBLED_NUM 6 // Used when chaining strips
#define RGBLED_SPLIT { 3, 3 } // Used when not chaining strips
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD