alterNERDtive/qmk_firmware
1
0
Fork 0
Code Pull requests Activity
qmk_firmware/keyboards/mechlovin/zed65
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
mono_led Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
no_backlight Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
config.h Move LED indicator config to data driven (#19800) 2023-02-17 13:14:29 +11:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md Remove more RESET keycode references (#18252) 2022-09-03 06:50:44 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
zed65.c [Keyboard] Add Zed65 (#17917) 2022-08-20 11:45:38 -07:00
zed65.h [Keyboard] Add Zed65-monoLED and Zed65-Cor65 (#18872) 2022-12-12 15:41:06 -08:00

readme.md

Zed65

Mechlovin's 65% PCB Platform, which works as the base for our 65%-layout PCB designs.

Make example for this keyboard (after setting up your build environment):

make mechlovin/zed65:default

Flashing example for this keyboard:

make mechlovin/zed65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available