qmk_firmware/keyboards/ekow/akira
Ryan 5e4b076af3
Remove legacy keycodes, part 5 (#18710)
* `KC_SLCK` -> `KC_SCRL`
* `KC_NLCK` -> `KC_NUM`
2022-10-15 22:29:43 +01:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
akira.c Adding akira (#16982) 2022-05-10 17:00:30 +01:00
akira.h Adding akira (#16982) 2022-05-10 17:00:30 +01:00
config.h Move keyboard USB IDs and strings to data driven: E (#17815) 2022-07-30 17:23:55 +10:00
info.json Move keyboard USB IDs and strings to data driven: E (#17815) 2022-07-30 17:23:55 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Adding akira (#16982) 2022-05-10 17:00:30 +01:00

AKIRA

  • Keyboard Maintainer: eugenepy
  • Hardware Supported: AKIRA pcb, both Hotswap and solderable.
  • Hardware Availability: Not yet on groupbuy

Build

Make example for this keyboard (after setting up your build environment):

make ekow/akira:default

Flashing example for this keyboard:

make ekow/akira:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available