qmk_firmware/keyboards/mechwild/bbs/config.h
Kyle McCreery acc11f4941
[Keyboard] MechWild BB Steno (#17163)
* allowing the kt60 file to be modified so I can do things while waiting for it to be fixed upstream

* Initial commit

* testing modes

* working on puckbuddy firmware. This is all working for now but need to clean it up and personalize it.

* needs to be updated from vial build

* prepping for PR

* added rgb mode cycling to fn1 since it isn't on the encoder for these maps

* shipping firmware built. Need to clean up readme and info.json layout

* removing puckbuddy files from this branch

* readme done, prepping for PR

* info.json updated prepping for PR

* Restore cirque driver that was modified from puckbuddy testing on this branch

* applying changes from review

* Update keyboards/mechwild/bbs/bbs.c

* Fixed info.json

* Apply suggestions from code review
2022-07-13 23:26:13 -07:00

96 lines
2.8 KiB
C

// Copyright 2022 Kyle McCreery (@kylemccreery)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x6D77 // mw = "MechWild"
#define PRODUCT_ID 0x170E
#define DEVICE_VER 0x0001
#define MANUFACTURER MechWild
#define PRODUCT BB Steno
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 6
/* allows the "key" button on the blackpill to toggle caps lock for user testing before soldering */
#define DIP_SWITCH_PINS { A0 }
/* status light pins using the on board LED for the blackpill */
#define LED_CAPS_LOCK_PIN C13
#define LED_PIN_ON_STATE 0
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B12, B10, B13, B1, B14 }
#define MATRIX_COL_PINS { B0, A7, A6, A5, A4, A3 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0