qmk_firmware/keyboards/handwired/lemonpad
James Young a1c1427594
Migrate LOCKING_*_ENABLE to Data-Driven: H, Part 3 (#23763)
Affects:

  - `handwired/jn68m`
  - `handwired/jopr`
  - `handwired/jot50`
  - `handwired/jotanck`
  - `handwired/jotpad16`
  - `handwired/jtallbean/split_65`
  - `handwired/juliet`
  - `handwired/k_numpad17`
  - `handwired/kbod`
  - `handwired/ks63`
  - `handwired/leftynumpad`
  - `handwired/lemonpad`
  - `handwired/m40/5x5_macropad`
  - `handwired/macroboard/f401`
  - `handwired/macroboard/f411`
  - `handwired/magicforce61`
  - `handwired/magicforce68`
  - `handwired/mechboards_micropad`
  - `handwired/minorca`
  - `handwired/mutepad`
  - `handwired/nicekey`
  - `handwired/nortontechpad`
  - `handwired/not_so_minidox`
  - `handwired/novem`
  - `handwired/nozbe_macro`
  - `handwired/numpad20`
  - `handwired/obuwunkunubi/spaget`
  - `handwired/oem_ansi_fullsize`
  - `handwired/onekey`
  - `handwired/ortho5x13`
  - `handwired/ortho5x14`
  - `handwired/p65rgb`
  - `handwired/pilcrow`
  - `handwired/polly40`
  - `handwired/postageboard/mini`
  - `handwired/postageboard/r1`
  - `handwired/prime_exl`
  - `handwired/prime_exl_plus`
2024-05-22 00:03:56 +01:00
..
keymaps Delete trivial keymap readmes (#23714) 2024-05-17 23:49:29 +01:00
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: H, Part 3 (#23763) 2024-05-22 00:03:56 +01:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

lemonpad

lemonpad

This is a QMK and VIA implementation for an atmega32u4 based adaptation of the Adafruit Lemon Keypad. By default it uses a Pro Micro, if you would like to use a different microcontroller please make sure you have the correct bootloader set.

Make example for this keyboard (after setting up your build environment):

make handwired/lemonpad:default

Flashing example for this keyboard:

make handwired/lemonpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available