qmk_firmware/keyboards/dark/magnum_ergo_1
Álvaro A. Volpato c8a28e8e9b
Add Magnum Ergo 1 by dark (#22139)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
2023-11-28 23:46:15 -08:00
..
keymaps Add Magnum Ergo 1 by dark (#22139) 2023-11-28 23:46:15 -08:00
config.h Add Magnum Ergo 1 by dark (#22139) 2023-11-28 23:46:15 -08:00
halconf.h Add Magnum Ergo 1 by dark (#22139) 2023-11-28 23:46:15 -08:00
info.json Add Magnum Ergo 1 by dark (#22139) 2023-11-28 23:46:15 -08:00
magnum_ergo_1.c Add Magnum Ergo 1 by dark (#22139) 2023-11-28 23:46:15 -08:00
mcuconf.h Add Magnum Ergo 1 by dark (#22139) 2023-11-28 23:46:15 -08:00
readme.md Add Magnum Ergo 1 by dark (#22139) 2023-11-28 23:46:15 -08:00
rules.mk Add Magnum Ergo 1 by dark (#22139) 2023-11-28 23:46:15 -08:00

Gondolindrim X Dark Magnum Ergo 1 PCB QMK firmware

The Magnum Ergo 1 is an Alice-layout ergonomic keyboard designed by Dark, with a PCB designer by Gondolindrim.

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCB using STM32F4x1C microcontroller;
  • Availability: as of november 2022 both keyboard and PCB were sold in a private Group Buy; therefore availability is limited.

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key, grave accent in the default keymap) and plug in the keyboard;
  • Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds;
  • Keycode in layout: Press the key mapped to QK_BOOT; in the default layout, that is top left key ('grave') in layer 1.

How to compile and flash

You can compile the Iron 165R2 default keymap by using the following:

make magnum_ergo_1:default

And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:

make magnum_ergo_1:default:flash