qmk_firmware/keyboards/fjlabs/tf60v2
2022-05-15 20:26:27 +01:00
..
keymaps RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
config.h Remove NO_ACTION_MACRO and NO_ACTION_FUNCTION from keyboard config.h (#16655) 2022-03-15 13:56:58 +00:00
info.json [Keyboard] Add FJLabs TF60 Variants and TF65 Variant (#14392) 2021-09-15 19:25:30 -07:00
readme.md [Keyboard] Add FJLabs TF60 Variants and TF65 Variant (#14392) 2021-09-15 19:25:30 -07:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00
tf60v2.c [Keyboard] Add FJLabs TF60 Variants and TF65 Variant (#14392) 2021-09-15 19:25:30 -07:00
tf60v2.h [Keyboard] Add FJLabs TF60 Variants and TF65 Variant (#14392) 2021-09-15 19:25:30 -07:00

FJLabs TF60 RGB V2

The following is the QMK Firmware for the FJLabs TF60 RGB V2 PCB, a universal tray mount 60% hotswap PCB with per key RGB LED's.

The PCB will feature:

  • Kailh Hotswap sockets
  • QMK & VIA compatibility
  • Per-Key RGB LED's

  • Keyboard Maintainer: FJLabs
  • Hardware Supported: TF60 RGB V2

Make example for this keyboard (after setting up your build environment):

make fjlabs/tf60v2:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide. Y

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available