qmk_firmware/keyboards/takashicompany/center_enter
2022-03-15 13:56:58 +00:00
..
keymaps [Keyboard] Add "Center x Enter" (#14790) 2021-10-11 19:41:50 -07:00
center_enter.c [Keyboard] Add "Center x Enter" (#14790) 2021-10-11 19:41:50 -07:00
center_enter.h [Keyboard] Add "Center x Enter" (#14790) 2021-10-11 19:41:50 -07:00
config.h Remove NO_ACTION_MACRO and NO_ACTION_FUNCTION from keyboard config.h (#16655) 2022-03-15 13:56:58 +00:00
info.json Takashi Company Center x Enter: correct info.json key sequence (#16120) 2022-01-29 23:29:42 +00:00
readme.md [Keyboard] Add "Center x Enter" (#14790) 2021-10-11 19:41:50 -07:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

Center x Enter

image

A 30% keyboard with the enter key placed in the center. Option to install a rotary encoder is also available. VIA (Remap) is also supported.

Make example for this keyboard (after setting up your build environment):

make takashicompany/center_enter:default

Flashing example for this keyboard:

make takashicompany/center_enter:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available