alterNERDtive/qmk_firmware
1
0
Fork 0
Code Pull requests Activity
qmk_firmware/keyboards/ungodly/launch_pad
History
Ryan 6545eb64a0
Move RGB_MATRIX_HUE/SAT/VAL/SPD_STEP to data driven (#21354)
2023-06-24 17:13:18 +10:00
..
keymaps Tap Dance: remove qk_ prefix (#19313) 2022-12-14 12:40:25 -08:00
config.h Move RGB_MATRIX_HUE/SAT/VAL/SPD_STEP to data driven (#21354) 2023-06-24 17:13:18 +10:00
info.json Move RGB_MATRIX_HUE/SAT/VAL/SPD_STEP to data driven (#21354) 2023-06-24 17:13:18 +10:00
launch_pad.c Move ortho & numpad layouts to data driven (#20183) 2023-03-29 15:54:34 +11:00
readme.md [Keyboard] Add Launch Pad keymaps (#12490) 2021-08-12 08:51:56 -07:00
rules.mk Move RGB_MATRIX_DRIVER to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

Launch Pad

The guidance computer inside the Launch Pad by Ungodly Design.

Features:

  • Onboard atmega32u4 controller, 5V @ 16MHz
  • Kaihl hotswap sockets
  • USB-C connector
  • 18 in-switch RGB LEDs
  • 4 underglow RGB LEDs
  • 100 Ω potentiometer slider
  • (optional) M2 pcb mounting holes
  • (optional) pcb-mount stablizer footprints
  • (optional) pin breakout:
    • F5, F4, F1, F0, VBUS, GND
PCB Front PCB Back
Numpad 5x4
Numpad Layout 5x4 Layout
Numpad 5x4

Make example for this keyboard (after setting up your build environment):

make ungodly/launch_pad:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Firmware

Reset Bootloader

Use tweezers to short the two bottom pins of the J-Link pinout.

Midi Setup

Windows Mac
  • Midi Mixer
    • Download the latest version of Midi Mixer
    • Run the exe to install the application.
    • Launch the MIDI Mixer application.
    • Navigate to the "Profiles" tab and select the "Ungodly Design Launch Pad" preset.
    • Navigate to the "Groups" tab and select the audio source you would like to control.
      Midi Mixer
    • Optionally, Navigate to the "Settings" tab and enable/disable "Logarithmic volume curve".

Custom OLED Displays

Layer Graphic
home home
nav nav
rgb rgb
  • These instructions require compiling your own firmware. Ensure that your build environenment is setup.
  • Use QMK Logo Editor to create your own LCD graphics.
  • Copy the generated output into your keymap (sample code)
    • Note: By default, the LCD is configured as a vertical display with a 180 degree rotation. You may need to change the OLED_ROTATION value in the keymap.c to achieve your desired effect.
  • Compile the firmware and flash it to your launch pad.