qmk_firmware/keyboards/acheron/keebspcb
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps/default Add KeebsPCB pre-Alpha support (#8485) 2020-03-26 02:22:08 +00:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Remove DESCRIPTION, 0-A (#11369) 2021-01-11 19:47:02 +11:00
info.json Add KeebsPCB pre-Alpha support (#8485) 2020-03-26 02:22:08 +00:00
keebspcb.c Add KeebsPCB pre-Alpha support (#8485) 2020-03-26 02:22:08 +00:00
keebspcb.h Add KeebsPCB pre-Alpha support (#8485) 2020-03-26 02:22:08 +00:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
readme.md Add KeebsPCB pre-Alpha support (#8485) 2020-03-26 02:22:08 +00:00
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

Acheron Aχξρων 60-SM-S-STM32-MX-HS-WI (codename "KeebsPCB") QMK firmware

Introduction

This is the QMK firmware repository for the KeebsPCB, updated until pre-revision Alpha.

The KeebsPCB is an Open-Hardware guidelines compliant PCB which files can be found at this link. Its designer and maintainer is Gondolindrim.

The KeebsPCB is a collaboration between Gondolindrim and MrKeebs; its layouts and features were cherry-picked by MrKeebs and the PCB was designed for him with these chosen features.

As of may 2020, there is no way to buy an KeebsPCB through a vendor or Group Buy; the only possible way is ordering them directly from a manufacturer.

Layouts

The PCB offers a single layout consisting of a default ANSI layout with 7U bottom row.

PCB Documentation

See the AcheronDocs page for the KeebsPCB full documentation. You can also check the KiCad PCB files at the KeebsPCB GitHub repository.

Before using the files for personal or commercial use, please read the Acheron Open-Hardware License V1.2 under which the Austin PCB is published.

How to compile

After setting up your build environment, you can compile the KeebsPCB default keymap by using:

make acheron/keebspcb:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.