qmk_firmware/keyboards/noxary/valhalla
2021-12-09 16:05:44 +11:00
..
keymaps [Keyboard] Add Noxary Valhalla support (#15197) 2021-11-29 00:25:53 -08:00
chconf.h [Keyboard] Add Noxary Valhalla support (#15197) 2021-11-29 00:25:53 -08:00
config.h [Keyboard] Add Noxary Valhalla support (#15197) 2021-11-29 00:25:53 -08:00
mcuconf.h [Keyboard] Add Noxary Valhalla support (#15197) 2021-11-29 00:25:53 -08:00
readme.md [Keyboard] Add Noxary Valhalla support (#15197) 2021-11-29 00:25:53 -08:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00
valhalla.c [Keyboard] Add Noxary Valhalla support (#15197) 2021-11-29 00:25:53 -08:00
valhalla.h [Keyboard] Add Noxary Valhalla support (#15197) 2021-11-29 00:25:53 -08:00

Noxary Valhalla

valhalla

An ergonomic 65% by Noxary

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCB
  • Hardware Availability: Noxary. As of november 17, the group buy has ended.

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds
  • Keycode in layout: Press the key mapped to RESET if it is available

Compile firmware

Make example for this keyboard (after setting up your build environment):

make noxary/valhalla:default

To directly flash the PCB after it is put into a DFU state, use

make noxary/valhalla:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.