alterNERDtive/qmk_firmware
1
0
Fork 0
Code Pull requests Activity
qmk_firmware/keyboards/mechlovin/infinity87/rgb_rev1
History
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
config.h Add TH1800 PCB, Hex6C PCB, Rogue87 PCB, Rouge87 PCB, Infinity87 series (#11977) 2021-04-09 20:48:30 +02:00
info.json Add TH1800 PCB, Hex6C PCB, Rogue87 PCB, Rouge87 PCB, Infinity87 series (#11977) 2021-04-09 20:48:30 +02:00
readme.md Add TH1800 PCB, Hex6C PCB, Rogue87 PCB, Rouge87 PCB, Infinity87 series (#11977) 2021-04-09 20:48:30 +02:00
rgb_rev1.c Add TH1800 PCB, Hex6C PCB, Rogue87 PCB, Rouge87 PCB, Infinity87 series (#11977) 2021-04-09 20:48:30 +02:00
rgb_rev1.h Add TH1800 PCB, Hex6C PCB, Rogue87 PCB, Rouge87 PCB, Infinity87 series (#11977) 2021-04-09 20:48:30 +02:00
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

readme.md

infinity87 RGB Rev.1

infinity87

A replacement PCB for TKL keyboard, RGB backlight, south-facing stabilisers, .STEP file in our github

Make example for this keyboard (after setting up your build environment):

make mechlovin/infinity87/rgb_rev1:default

Flashing example for this keyboard:

make mechlovin/infinity87/rgb_rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Reset Key: To put the IF87_RGB_Rev.1 into bootloader, hold esc key while plugging in (bootmagic) or push reset swith on the bottom of the PCB.