History

Ryan 8f6c228adb Move `SOFT_SERIAL_PIN` to data driven (#19863 )		2023-02-17 16:40:49 +11:00
..
keymaps	Fixup momoka_ergo (#18704 )	2022-10-14 10:07:07 +11:00
config.h	Move `SOFT_SERIAL_PIN` to data driven (#19863 )	2023-02-17 16:40:49 +11:00
info.json	Move `SOFT_SERIAL_PIN` to data driven (#19863 )	2023-02-17 16:40:49 +11:00
momoka_ergo.c	[Keyboard] Add Momoka ergo (#13127 )	2021-07-20 10:46:29 -07:00
momoka_ergo.h	Momoka Ergo: layout macro/Configurator fix (#13825 )	2021-07-31 12:16:51 -07:00
readme.md	[Keyboard] Add Momoka ergo (#13127 )	2021-07-20 10:46:29 -07:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

momoka_ergo

The MOMOKA Ergo is a split keyboard that is based on the Ergodox standard layout. It has 35 keys and 11 RGB backlights on each part. The two parts of the keyboard is connected by a TRRS cable.

Keyboard Maintainer: StefanGrindelwald
Hardware Supported: momoka.co/ergo
Hardware Availability: momoka.co/ergo

Bootloader:

With the default keymap, you can easily use FN+Shift+D to enter the bootloader in left side and FN+shift+K in right side. Or you can just use the microswitch in the PCB.

Make example for this keyboard (after setting up your build environment):

make momoka_ergo:default

Flashing example for this keyboard(Note that you need flash the both side keyboard respectively):

For the left side:

make momoka_ergo:default:dfu-split-left

For the right side:

make momoka_ergo:default:dfu-split-right

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.