qmk_firmware/keyboards/splitography
2024-02-15 09:42:01 +00:00
..
keymaps Remove obvious user keymaps, keyboards/{s,t}* edition. (#23084) 2024-02-15 09:42:01 +00:00
config.h Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
info.json Move single LAYOUTs to data driven (#20365) 2023-04-12 13:42:51 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

Splitography

Splitography

A pay what you will compact keyboard intended for use with Plover, free and open source stenography software. This is a low-cost keyboard with minimal packaging and design, and arrives fully assembled, ready to use.

Make example for this keyboard (after setting up your build environment):

make splitography:default

Flashing example for this keyboard:

make splitography:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.
  • Physical reset button: Briefly press the button on the back of the PCB.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.

Guide

Splitography quick start video

A short video guide on how to set up the SOFT/HRUF Splitography, a mechanical keyboard intended for use with Plover.

Here is a reference card for the standard keyboard layout:

Reference card

  • While holding down a colored thumb key, the matching colored functions/characters on the remaining keys can be pressed.
  • Bottom edge keys are accessed by holding down both keys.
  • Numlock locks in the Numpad layer.
  • Alt and Shift pressed simultaneously to return to the standard layout.