qmk_firmware/keyboards/dztech/dz65rgb
2021-10-10 16:57:49 -07:00
..
keymaps Remove bin/qmk (#14231) 2021-08-29 16:50:22 -07:00
v1 Remove audio pin references in rules.mk (#14532) 2021-09-21 20:04:03 +10:00
v2 Remove audio pin references in rules.mk (#14532) 2021-09-21 20:04:03 +10:00
v3 Clean up LED/RGB Matrix driver config (#14760) 2021-10-10 16:57:49 -07:00
config.h [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2021-06-18 17:54:29 -07:00
dz65rgb.c [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2021-06-18 17:54:29 -07:00
dz65rgb.h [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2021-06-18 17:54:29 -07:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2021-06-18 17:54:29 -07:00

DZ65RGB

A customizable 65% RGB keyboard.

  • Keyboard Maintainer: moyi4681
  • Hardware Supported: DZ65RGB V1,V2 and V3
  • Hardware Availability: KBDfans

There are three versions of the DZ65RGB. Please use the appropriate firmware for your board.

  • V1: STM32F303 (Arm), takes .bin files
  • V2: ATmega32U4 (AVR), takes .hex files, is31fl3731 rgbmatrix driver
  • V3: ATmega32U4 (AVR), takes .bin files, is31fl3741 rgbmatrix driver

Bootloader mode

To put in bootloader mode, hold the Esc key while plugging in the USB cable. or use reset key behind the pcb.

Making firmware

Make example for this keyboard (after setting up your build environment):

make dztech/dz65rgb/v1:default # Arm (STM32F303)
make dztech/dz65rgb/v2:default # AVR (ATmega32U4)
make dztech/dz65rgb/v3:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.