qmk_firmware/keyboards/spleeb/spleeb.h
Christopher Hoage 96b0baa230
[Keyboard] Add Spleeb default and custom firmware (#19481)
Co-authored-by: jack <0x6a73@protonmail.com>
2023-03-10 22:33:52 -07:00

149 lines
4.5 KiB
C

// Copyright 2022 Chris Hoage (@chrishoage)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "quantum.h"
#if defined(SPLEEB_ENCODER_MODE_MAP_ENABLE) && !defined(ENCODER_ENABLE)
# error "Encoder must be enabled to use encoder mode map"
#endif
#if defined(SPLEEB_ENCODER_MODE_MAP_ENABLE) && defined(ENCODER_MAP_ENABLE)
# error "Encoder mode map can not be used with encoder map"
#endif
enum spleeb_keycodes {
POINTER_DEFAULT_DPI_FORWARD = QK_KB,
POINTER_DEFAULT_DPI_REVERSE,
POINTER_SNIPING_DPI_FORWARD,
POINTER_SNIPING_DPI_REVERSE,
SNIPING_MODE,
SNIPING_MODE_TOGGLE,
DRAGSCROLL_MODE,
DRAGSCROLL_MODE_TOGGLE,
ENC_MODE_STEP_LEFT,
ENC_MODE_STEP_RIGHT,
};
#define DF_MOD POINTER_DEFAULT_DPI_FORWARD
#define DF_RMOD POINTER_DEFAULT_DPI_REVERSE
#define SP_MOD POINTER_SNIPING_DPI_FORWARD
#define SP_RMOD POINTER_SNIPING_DPI_REVERSE
#define SNIPING SNIPING_MODE
#define SNP_TOG SNIPING_MODE_TOGGLE
#define DRGSCRL DRAGSCROLL_MODE
#define DRG_TOG DRAGSCROLL_MODE_TOGGLE
#define ENC_STL ENC_MODE_STEP_LEFT
#define ENC_STR ENC_MODE_STEP_RIGHT
#ifdef POINTING_DEVICE_ENABLE
# ifndef SPLEEB_MINIMUM_DEFAULT_DPI
# define SPLEEB_MINIMUM_DEFAULT_DPI 300
# endif // SPLEEB_MINIMUM_DEFAULT_DPI
# ifndef SPLEEB_DEFAULT_DPI_CONFIG_STEP
# define SPLEEB_DEFAULT_DPI_CONFIG_STEP 100
# endif // SPLEEB_DEFAULT_DPI_CONFIG_STEP
# ifndef SPLEEB_MINIMUM_SNIPING_DPI
# define SPLEEB_MINIMUM_SNIPING_DPI 100
# endif // SPLEEB_MINIMUM_SNIPING_DPI
# ifndef SPLEEB_SNIPING_DPI_CONFIG_STEP
# define SPLEEB_SNIPING_DPI_CONFIG_STEP 100
# endif // SPLEEB_SNIPING_DPI_CONFIG_STEP
# ifndef SPLEEB_DRAGSCROLL_DIVISOR
# define SPLEEB_DRAGSCROLL_DIVISOR 64
# endif // !SPLEEB_DRAGSCROLL_DIVISOR
#endif // POINTING_DEVICE_ENABLE
#ifdef SPLEEB_ENCODER_MODE_MAP_ENABLE
# ifndef SPLEEB_ENCODER_MODE_COUNT
# define SPLEEB_ENCODER_MODE_COUNT 4
# endif
typedef struct {
uint8_t mode;
// Discriminate between array members which are (un)initialized
bool initalized;
} const spleeb_enc_mode_t;
const spleeb_enc_mode_t spleeb_encoder_mode_map[NUM_ENCODERS][SPLEEB_ENCODER_MODE_COUNT];
// SPLEEB_ENC_MODE initializes the spleeb_enc_mode_t struct such that
// uninitialized mode_map members can be discriminated against when looking up
// mapped encoder modes.
# define SPLEEB_ENC_MODE(mode) \
{ mode, true }
#endif // SPLEEB_ENCODER_MODE_MAP_ENABLE
#ifdef POINTING_DEVICE_ENABLE
/** \brief Return the current DPI value for the pointer's default mode. */
uint16_t spleeb_get_pointer_default_dpi(void);
/**
* \brief Update the pointer's default DPI to the next or previous step.
*
* Increases the DPI value if `forward` is `true`, decreases it otherwise.
* The increment/decrement steps are equal to SPLEEB_DEFAULT_DPI_CONFIG_STEP.
*
* The new value is persisted in EEPROM.
*/
void spleeb_cycle_pointer_default_dpi(bool forward);
/**
* \brief Same as `spleeb_cycle_pointer_default_dpi`, but do not write to
* EEPROM.
*
* This means that reseting the board will revert the value to the last
* persisted one.
*/
void spleeb_cycle_pointer_default_dpi_noeeprom(bool forward);
/** \brief Return the current DPI value for the pointer's sniper-mode. */
uint16_t spleeb_get_pointer_sniping_dpi(void);
/**
* \brief Update the pointer's sniper-mode DPI to the next or previous step.
*
* Increases the DPI value if `forward` is `true`, decreases it otherwise.
* The increment/decrement steps are equal to SPLEEB_SNIPING_DPI_CONFIG_STEP.
*
* The new value is persisted in EEPROM.
*/
void spleeb_cycle_pointer_sniping_dpi(bool forward);
/**
* \brief Same as `spleeb_cycle_pointer_sniping_dpi`, but do not write to
* EEPROM.
*
* This means that reseting the board will revert the value to the last
* persisted one.
*/
void spleeb_cycle_pointer_sniping_dpi_noeeprom(bool forward);
/** \brief Whether sniper-mode is enabled. */
bool spleeb_get_pointer_sniping_enabled(void);
/**
* \brief Enable/disable sniper mode.
*
* When sniper mode is enabled the dpi is reduced to slow down the pointer for
* more accurate movements.
*/
void spleeb_set_pointer_sniping_enabled(bool enable);
/** \brief Whether drag-scroll is enabled. */
bool spleeb_get_pointer_dragscroll_enabled(void);
/**
* \brief Enable/disable drag-scroll mode.
*
* When drag-scroll mode is enabled, horizontal and vertical pointer movements
* are translated into horizontal and vertical scroll movements.
*/
void spleeb_set_pointer_dragscroll_enabled(bool enable);
#endif // POINTING_DEVICE_ENABLE