qmk_firmware/keyboards/zoo/wampus/config.h
0z00 30afa1ccd3
[Keyboard] Add Wampus (#10991)
* Configure new keyboard zoo/wampus

* Apply suggestions from code review

Update LED pins to defined defaults

Co-authored-by: Joel Challis <git@zvecr.com>

* Apply suggestions from code review

- Remove unused layers from default.
- Remove chibios patch comment

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-11-22 21:21:51 +00:00

95 lines
2.7 KiB
C

/*
Copyright 2020 Matthew Tso (zoo)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x0200
#define PRODUCT_ID 0xE600
#define DEVICE_VER 0x0001
#define MANUFACTURER zoo.haus
#define PRODUCT Wampus
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { C13, C14, A5, A4, A3 }
#define MATRIX_COL_PINS { A10, A9, A8, B12, A15, A13, A7, A2, A1, A0, F1, F0, B3, B4, B5 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define LED_NUM_LOCK_PIN B0
#define LED_CAPS_LOCK_PIN B8
#define LED_SCROLL_LOCK_PIN B9
// In-switch LED defines
#define BACKLIGHT_PIN A6
#define BACKLIGHT_LEVELS 3
#define BACKLIGHT_BREATHING
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
// RGB Underglow WS2812 Matrix defines
#define RGBLIGHT_ANIMATIONS
#define RGB_DI_PIN B15
#define RGBLED_NUM 20
// SPI RGB Driver
#define WS2812_SPI SPID2
#define WS2812_SPI_MOSI_PAL_MODE 0
// OLED defines
#define OLED_TIMEOUT 60000
/* Both pins are in bank B */
#define I2C1_SCL 6 // B6
#define I2C1_SDA 7 // B7
#define I2C1_SCL_PAL_MODE 1
#define I2C1_SDA_PAL_MODE 1
/* This configures the I2C clock to 400khz assuming a 48Mhz clock */
#define I2C1_TIMINGR_PRESC 0U
#define I2C1_TIMINGR_SCLDEL 3U
#define I2C1_TIMINGR_SDADEL 1U
#define I2C1_TIMINGR_SCLH 3U
#define I2C1_TIMINGR_SCLL 9U
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION