qmk_firmware/keyboards/rgbkb/mun
2022-09-26 14:40:15 +10:00
..
keymaps Change {LED,RGB}_DISABLE_TIMEOUT to {LED,RGB}_MATRIX_TIMEOUT (#18415) 2022-09-26 14:40:15 +10:00
rev1 Move keyboard USB IDs and strings to data driven, pass 2: P-R (#18091) 2022-08-20 01:42:49 +01:00
.noci Keyboards/RGBKB/Mün (#13239) 2021-06-25 22:00:21 -07:00
config.h Change DRIVER_LED_COUNT to {LED,RGB}_MATRIX_LED_COUNT (#18399) 2022-09-23 22:46:23 +10:00
halconf.h Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
mcuconf.h Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
mun.c Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
mun.h Keyboards/RGBKB/Mün (#13239) 2021-06-25 22:00:21 -07:00
readme.md Keyboards/RGBKB/Mün (#13239) 2021-06-25 22:00:21 -07:00
rules.mk Rgbkb/keeb fixes (#17932) 2022-08-07 14:01:10 +01:00

Mün

Mün

Mün is powered by STM32 with full QMK support. Each key has super-bright RGB backlighting and MX Kailh hotswap sockets. No soldering is required to get a fully functioning keyboard. There are an additional 14 rear-facing RGB LEDs on each side. Each half can be configured to run as master or slave with the two USB-C ports. They also support up to two rotary encoders and one OLED panel per half.

Keyboard Maintainer: Legonut
Hardware Supported: Mün PCB R1.0, R1.1, R1.2 Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/mun:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.