3c58f98929
* PMW33XX drivers overhaul This combines the PMW3389 and PM3360 drivers as they only differ in the firmware blobs and CPI get and set functions. The following changes have been made: * PMW3389 now gets the same multi-sensor feature that is already available on the PMW3360. * Introduced a shared pmw33xx_report_t struct is now directly readable via SPI transactions instead of individual byte-sized reads, saving multiple copies and bitshift operations. * pmw33(89/60)_get_report functions had unreachable branches in their motion detection logic these have been simplied as much as possible. * The fast firmware upload option has been removed as this becomes obsolete by the newly introduced polled waiting functions for ChibiOS polled waiting * PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options have been removed as they don't need to be configurable. * All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix to reduce code duplication and make the defines interchangeable * Adjust keyboards to PMW33XX naming scheme
83 lines
2.2 KiB
C
83 lines
2.2 KiB
C
/*
|
|
* Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
|
|
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#define VENDOR_ID 0xA8F8
|
|
#define PRODUCT_ID 0x1832
|
|
#define DEVICE_VER 0x0001
|
|
#define MANUFACTURER Bastard Keyboards
|
|
#define PRODUCT Charybdis Nano
|
|
|
|
/* Key matrix configuration. */
|
|
|
|
// Rows are doubled-up.
|
|
#define MATRIX_ROWS 8
|
|
#define MATRIX_COLS 5
|
|
|
|
// Wiring configuration for each half.
|
|
#define MATRIX_ROW_PINS \
|
|
{ B7, C6, D4, B5 }
|
|
#define MATRIX_COL_PINS \
|
|
{ C7, F0, D7, E6, B4 }
|
|
|
|
#define MATRIX_ROW_PINS_RIGHT \
|
|
{ F0, C6, D4, B5 }
|
|
#define MATRIX_COL_PINS_RIGHT \
|
|
{ C7, B7, D7, E6, B4 }
|
|
|
|
#define DIODE_DIRECTION ROW2COL
|
|
|
|
/* Handedness. */
|
|
#define MASTER_RIGHT
|
|
|
|
/* Bootmagic Lite configuration. */
|
|
#define BOOTMAGIC_LITE_ROW 0
|
|
#define BOOTMAGIC_LITE_COLUMN 0
|
|
#define BOOTMAGIC_LITE_ROW_RIGHT 4
|
|
#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
|
|
|
|
/* serial.c configuration (for split keyboard) */
|
|
#define SOFT_SERIAL_PIN D2
|
|
|
|
/* Set 0 if debouncing isn't needed. */
|
|
#define DEBOUNCE 5
|
|
|
|
/* PMW33XX settings. */
|
|
#define PMW33XX_CS_PIN B0
|
|
|
|
// Trackball angle adjustment.
|
|
#define ROTATIONAL_TRANSFORM_ANGLE -25
|
|
|
|
/* RGB settings. */
|
|
|
|
#define RGB_DI_PIN D3
|
|
#define RGBLED_NUM 35
|
|
#define RGBLED_SPLIT \
|
|
{ 18, 17 }
|
|
|
|
/* RGB matrix support. */
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
# define SPLIT_TRANSPORT_MIRROR
|
|
# define DRIVER_LED_TOTAL RGBLED_NUM
|
|
# define RGB_MATRIX_SPLIT RGBLED_SPLIT
|
|
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
|
|
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
|
|
# define RGB_DISABLE_WHEN_USB_SUSPENDED
|
|
# define RGB_MATRIX_KEYPRESSES
|
|
#endif
|