qmk_firmware/keyboards/snampad/rules.mk
Peter Tillemans 32952d8624 Pti keymaps (#6025)
* created new folder to port my old layout

* removed Colemak, enabled backlight.

* fixed backlight support

* added Ctrl/Esc + Shift/Enter double function keys

* made planck compatible with Atreus board, including docs

* enable backlight control

* make planck more compatible with atreus layout

* migrate to qwerty and separate alt-space

* adding ok64 and redox layouts

* fix dot in numerical pad

* fix dot in dvorak layout

* added redox and pro micro version of snampad

* add arrows on right mod keys and map PrtScr on Fn P

* add keys to swap between mac and windows

* added escape to redox layout

* added printscreen key

* moved layout closer to what I am used to.

* swap spc and bspc, add ctrl to quot

* qwertified atreus layout

* fix for compile errors when RGB or BACKLIGHT disabled

* add customized keymap for the m65a

* Reverted unintended change in default keymap.

* Remove unused code in my keymap and modernized tap hold keys

* Update keyboards/snampad/config.h

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/snampad/rules.mk

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/snampad/rules.mk

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/snampad/snampad.h

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/snampad/config.h

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/snampad/keymaps/default/config.h

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/snampad/snampad.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/snampad/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/snampad/keymaps/default/keymap.c

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/snampad/snampad.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/snampad/snampad.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/snampad/snampad.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/snampad/rules.mk

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/planck/keymaps/ptillemans/keymap.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/jc65/v32a/keymaps/ptillemans/keymap.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/snampad/snampad.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* cleanup snampad layout

* Update keyboards/snampad/snampad.c

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* further mmended cleaning

- removed obsolete Backspace handling in jc65 keymap
- improved shift detection
- modernized planck keymap
- added details to snampad readme
- other recommended refactors in snampad
2019-06-03 12:09:01 -07:00

82 lines
3.3 KiB
Makefile

# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = caterina
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
LAYOUTS = numpad_6x4