qmk_firmware/keyboards/bm68rgb/config.h
Albert Y 0eabb01e27
Minor improvements to BM68RGB (#12156)
* Minor improvements to BM68RGB

* Add grave esc and LTO support

* Move comments to end of line

* Document the use of qmk script for compiling and flashing

* Revert arrow key flags back to mod

* Update keyboards/bm68rgb/bm68rgb.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/bm68rgb/bm68rgb.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Remove grave escape

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update tab spacing

Co-authored-by: Ryan <fauxpark@gmail.com>

* Reverted make default

Co-authored-by: Ryan <fauxpark@gmail.com>

* Reverted make flash

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: filterpaper <filterpaper@localhost>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-03-25 23:08:04 +11:00

122 lines
3.6 KiB
C

/*
Copyright 2021 peepeetee
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4B50 //KP
#define PRODUCT_ID 0xEF6F
#define DEVICE_VER 0x0001
#define MANUFACTURER KPRepublic
#define PRODUCT bm68rgb
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B0, \
B1, \
B2, \
B3, \
E6 }
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
// The pin connected to the data pin of the LEDs
#define RGB_DI_PIN E2
// The number of LEDs connected
#define DRIVER_LED_TOTAL 74
#ifdef RGB_DI_PIN
#define RGBLED_NUM 74
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0